Pyrolysis devices for the disposal of solid waste (municipal solid waste) have many advantages. First of all, it is important to note that they are environmentally friendly. Productivity averages 120 cubic meters. meters per hour. A standard installation consists of several blocks. In the central part of the modifications is a volumetric chamber.
Pumps are used in different capacities. The receiving funnels are mainly located at the top of the structure. Capacitors are located above the shutter. Throttles are fixed above the fan. Pyrolysis units are also made with air heaters. Many models use multiple nozzles. Above the water baths are the shvanshahty. Smoke exhausters are installed above the gas analyzers. Gas cleaning systems are used in various classes.
DIY device
Do-it-yourself pyrolysis installation is quite difficult. First of all, a large camera is required for assembly. The receiving funnel should be small in size. If you believe the experts, then the shutter is more appropriate to use with a lock. The condenser of the modification is necessary for liquid products. Throttles are used to adjust the temperature.
After installing the fans, the pump is attached. Air heaters are mainly used tubular type. Water baths are usually installed in the lower part of the structure. On many models, the shaft is fixed under the pump.
Mobile modifications
Mobile waste pyrolysis plants are produced with 2 W pumps. For many versions, the throttle is small. If you believe the experts, then the performance of mobile modifications is at the level of 100 cubic meters. meters per hour of operation.
The maximum temperature of the models is at 430 degrees. It is also worth noting that the mobile pyrolysis installation is made with compact sized water baths. The permissible pressure parameter in the devices is low.
Stationary units
Stationary pyrolysis plants are highly efficient. Moreover, their pressure is at least 40 Pa. Protection systems are used by the PP20 series. Many models use two throttle valves. The operating temperature of the modifications is approximately 230 degrees. In terms of parameters, capacitors of stationary modifications are very different. Pumps are typically used at 4 watts. Smoke exhausters are installed in various diameters. Shutters are located only in the central part of the camera.
LL-2200 Series Installation Parameters
This continuous pyrolysis unit is manufactured with a dual chamber. Heat treatment of the modification does not take much time. The performance parameter is at 400 cc. meters per hour. The receiving funnel in this case is located above the water bath.
If you believe the experts, the protection system is used in high quality. In this case, the throttle is able to withstand a pressure of 4 Pa. The smoke exhaust for the modification is used of a small diameter. The shutter is standardly used with a bushing type lock.
Features of the LL-2300
This pyrolysis installation for solid waste is capable of boasting a high parameter of permissible pressure. According to experts, the heat treatment does not take much time. The filtration system for the modification is used in the KE400 class. It is also worth noting that only one capacitor is used. Many experts point to the wide Schwälschacht. The water bath in this case is located above the camera. The blocker for the modification has a passage type. The maximum temperature parameter is 380 degrees.
Unit Specifications LL-2400
This pyrolysis type installation is made with two water baths. According to experts, they can withstand pressure no more than 4 Pa. The filtration system of the modification has a RE500 class. In this case, only one throttle is used. Schwelshacht is applied without shutter. The receiving funnel of the model is located above the camera.
Many experts say that the device is not afraid of overloads. The gas analyzer is used without a counter. If we talk about the shortcomings, it is important to note the small nozzle. The air heater in the design is used tubular type.
Installation parameters of the FAS-8-1 / VP series
The presented installation of the pyrolysis type has many advantages. First of all, experts say that the modification uses a high-quality shutter. At the same time, throttle valves can withstand a large load. The modification funnel has only one. Directly, the filtration system copes with its tasks perfectly. The productivity of the specified installation pyrolysis type is 130 cubic meters. meters per hour. All this was made possible thanks to a powerful air heater.
The pumps themselves are applied at 3 watts. If you believe the experts, then the shvelshahta is used in compact sizes. However, it can withstand a lot of pressure. The maximum temperature setting is 450 degrees. The protection system in the installation is used in PK30 class. The gas analyzer of the modification is installed near the fan.
Features of the FAS-8-2 / VP device
This is a high-quality and productive pyrolysis installation. The processing of solid waste in this case is very fast. The air heater in the modification is used with one pump. According to expert reviews, only one nozzle is installed.
Directly receiving funnel is used in small sizes. Many experts say that the modification is able to withstand a pressure of 4 Pa. Her filtration system is not of high quality. At the same time, the shvanshaht is installed in small sizes. In total, the design has two throttle valves. The shutter of the modification is located behind the fan.
Characteristics of the FAS-8-4 / VP unit
This continuous pyrolysis plant is manufactured with two shutters. Thanks to a wide receiving funnel high efficiency is provided. The protection system for the modification is used in the PK30 series. Shutter overheating is quite rare. The gas cleaning system is used first class. Only one nozzle is used for a shvanshahta. The temperature limit for the modification is 340 degrees. In this case, the pressure is maintained no more than 5 Pa.
Installation parameters of the FAS-8-5 / VP series
This pyrolysis installation differs from other models by a high camera. At the same time, a water bath is used with a gas cleaning system. If you believe the opinion of experts, the filtration is applied in high quality. The filtration system for the modification is provided for in the PK33 class. At the same time, the receiving funnel is protected by a reliable lid, which is equipped with its own interlock.
The shutter of the modification applies only one. Many experts say that the capacitor is able to work at high temperatures. He holds the ultimate pressure at 3 Pa. The heated air nozzle can withstand loads of 5 N. The air heater is standardly used tubular type.
Features of the FAS-8-10 / VP device
This pyrolysis plant is made with large blocks for heating waste. There is only one water bath in the modification. If you believe the reviews of experts, then problems with overheating of the nozzle arise very rarely. The protection system in the installation is used in class PK33. At the same time, the operating temperature is at 450 degrees. The receiving funnel is installed in small sizes. The shutter of the modification is installed with a high-quality lock.
The modification capacitor is able to cope with various liquid products. Many experts say that throttle valves can not withstand heavy loads. The smoke exhaust for the modification is used with its own filtration system.
Characteristics of the FAS-8-13 / VP unit
The pyrolysis installation of this series is in great demand. Some experts talk about high performance and high-quality water bath. It is also worth noting that the modification has two shutters. Thus, problems with the receipt of waste should not arise.
The protection system of the model is used in class PK40. Schwelshacht uses a straight-through type. Only one capacitor is used. The maximum overload parameter is at the level of 5 N. There is no system for protection against waste burnout in this case. The air heater for the modification is located behind the fan.
Installation parameters of the FAS-8-15 / VP series
This pyrolysis installation is made with only one shutter, and the manufacturer does not provide a lock for it. If you believe the opinion of experts, the shutter stops very rarely. The protection system for the model is used in the PK45 class. Many experts say that the model can work in various conditions. The gas analyzer is used in the third class.
Only one water bath is used. It is also worth noting that the capacitor is a drive type, and it is equipped with a separate fan. The maximum temperature of the modification is 450 degrees, and the pressure on the valve is 4 Pa.
Features of the device "Fortan"
The Fortan pyrolysis plant is notable for the fact that it has two shutters. Waste loading does not take much time. It does not harm the environment. If we talk about indicators, it is important to note that the maximum temperature is at 400 degrees. The protection system for the modification has a class of PK300. Schwelschacht in this case will apply only one. In this case, the fan uses high power.
It is also worth mentioning that the model is able to work offline. Her pump is used at 3 watts. The gas cleaning system is available in the third class. Many experts say that modifications copes well with overloads. The capacitor of the model is used drive type. In total, the device uses two blockers and one solution. The ultimate pressure of the modification is 8 Pa.