Inexperienced in terms of tourist travel, people do not know how to put up a tent. Quite often, they have a question about how to fold the tent in figure eight. How to fold, and to decompose it is very difficult, and this should be done qualitatively. In this case, it is worthwhile to understand that you need to perform actions so that the entire structure fits into one or another bag. This process is the best option for solving the above problem. On how to fold the tent with a figure of eight, we will describe further as detailed as possible.
Winter tent
As a rule, tents that are provided for the winter period have both an external and internal frame. They also include locks and lots of Velcro. Such designs are quite different from the standard types. Consider how to fold a winter tent with a figure of eight. In order to carry out packaging of this "home", absolutely all locks and Velcro should be closed. Next, one of the 4 corners must be pressed inward. You should get the shape of the book. Next, you must set up the tent so that one corner is turned towards you. The ribs, which are located below, must be pressed firmly to the floor, and the upper tilt first forward and then down. Then you can safely pack the tent in a case.
Analysis of the inner frame
As we stated earlier, the frame, which is hidden under the awning, must be disassembled by a special method:
- First of all, you need to remove all the pegs around the entire perimeter of this design.
- Then the tent is removed and the necessary arcs are pulled out. The latter need to be folded separately.
- After that, lay the two layers together on the ground so that the seam passes along the seam of the other layer. Then all this needs to be turned into a tube. You can simply lay layers on top of each other and twist them.
In the event that you folded everything according to the instructions, but the tent does not fit in the bag, this means that it was not installed correctly.
The tent in which the frame is located outside is assembled in an almost identical way:
- First of all, you need to stretch all the pegs.
- Remove the awning present.
- Remove all arcs and fold them separately.
- Collapse the design according to the previous principle.
The question of how to fold a tent of a fishing form by eight is also quite common.
First of all, it is necessary to remove all things from it and fold the structure flat. Choose one of the sides and give it a vertical position. This side must be twisted 180 degrees. In this process, you will get a certain ring that you have to bend all the way down to the ground. At the top you will have a ring from the very beginning. After completing this procedure, you should fold the rings together. Then you can safely put the tent in your case.
How to assemble a children's tent
We figured out how to put up a tent for adults by eight, but with the nursery, some nuances still need to be solved. Such designs are assembled even faster than adults. Let's figure out how to fold a children's tent with an eight. This will take you no more than two minutes. But sometimes folding it compactly is also difficult. In order for everything to work out well, you must adhere to the instructions:
- We take two opposite ribs.
- The rib from the right hand is connected to the opposite edge.
- The plane that we get must be taken for the lower third part.
- Then we put one hand under the other - we get the "eight".
- We put the circles of eight on top of each other so that two rings form.
- And these rings fit perfectly into a standard case.
How to assemble a Chinese tent
How to fold a Chinese tent by eight? Pretty interesting question. These tents are the most common due to the fact that they are easy to fold and easy to use. But the information on how to properly collect them is not available to everyone. Therefore, we present you the correct instructions for collecting a tent made in China. First of all, the difficulties are at the very beginning of the process. People just don't know how to start it right. It is necessary to fold the side stripes. This type of assembly is easiest to do together, but if nobody else is around, you can hold the other side with your foot. In conclusion, it is necessary to twist the oval into a rather compact circle.
How to assemble a tent machine
Undoubtedly, an automatic type tent has several advantages over the standard option. The design of such a tent includes a steel base, which is covered with polyester. It is very easy to assemble it, and most importantly - quickly.
When collecting the tent, follow the instructions:
- Flatten your structure.
- Gently pull one end of the tent toward you, and then press it against the other edge of the plane.
- The arches of the tent will take the form of a figure eight, then you screw it to the shape of a circle and put it in the bag.
Thus, we examined all the nuances of folding the tent by eight, which will be a good help in the implementation of this process.