If you are faced with the task of exterior decoration at home, then you will face the question of choosing a material that will combine excellent performance and have a low cost. If your eyes fell on siding, then its choice must be given special attention.
Production Features
If you are thinking about how to choose a siding, then you need to know about the production features of this material. In fact, it is made not only of vinyl, it contains polyvinyl chloride, which copes well with external influences. The composition of this finish contains vinyl mass, plasticizers, stabilizers, fillers, as well as pigments. The second component is designed to reduce the fragility of the material, while the third gives the paintings strength.
What to look for when choosing
If you are faced with the question of how to choose a siding, it is important to consider that high-quality material should have a good color. In order to verify this characteristic, it is necessary to compare the shades of the outer and wrong sides. Colors must match. If the inner surface is slightly lighter, this indicates that the manufacturer added less pigment, trying to save. This finish belongs to the budget category. However, most often it has acceptable performance. It is important to note that the siding panel should be painted evenly, on the basis there should be no spots, stains, as well as differences in shades. Before choosing a siding, you should consider that the pigment acts as the most expensive component used in the production of the described finish. It is on it that manufacturers try to save. This indicates that the uniformity of the shade is a kind of indicator that indicates the integrity of the manufacturer.
Design Features
If at the first stage the canvas passed the color test, then you should pay attention to the thickness of the sheet. It is important to conduct a side cut analysis, which should be uniform. Follow this from the fasteners to the castle. Internal siding should be checked for the same quality characteristics. This requirement is due to the fact that only the finish, which has a uniform thickness throughout the panel, is able to effectively withstand static and wind loads. If the thickness changes, and the sheet has voids and shells, then this indicates a poor-quality product. The consumer should pay attention to the surface of the canvas, it should be uniform and matte. The glossy base has budget brands, while you must be prepared for the fact that the panel quickly fades during operation, and is also easily deformed under the influence of high temperatures. Glossy siding has established itself as a material prone to peeling or delamination of the surface.
Mounting Holes
If you are thinking about how to choose a siding, it is important to consider that the holes intended for installing self-tapping screws and nails must have the same size and shape. They should be located strictly on the same line. It is important to consider that holes with uneven edges are a sign of marriage. You should not buy the panel, the holes of which are not completely made and tightened with thin plastic.
Panel Elements
All siding elements must have the same size and shape. If the paintings that belong to the same batch show deviations in the dimensions of the parts of the locks, then it will be very difficult to install such a finish yourself. In this case, the quality of the connection will be lower. It is important to check the ease of snap locks, this process should not be accompanied by difficulties. In addition to external analysis, it makes sense to test the sample for ductility. To do this, the oversized segment of the canvas needs to be bent in the thinnest place, which are nail holes. If the canvas breaks on a bend or becomes cracked, this will indicate that the manufacturer has saved on the use of plasticizers. Such sheets are not suitable for installation, they will crack when exposed to significant loads.
additional characteristics
If you decide to make the selection of siding yourself, then you must also pay attention to the manufacturer. American and European firms have established themselves as the most reliable manufacturers of the described material. Higher quality canvases come off their conveyors, but the cost will be higher. Some companies that have offices in European countries have factories in Asia. It is for this reason that you must first carefully study the information about the manufacturer, otherwise you can buy Chinese-made goods at a European price. It is impossible to imagine siding selection without examining information about the conditions of the guarantee. For reputable manufacturers, this period varies from 25 to 50 years. The warranty applies only to those cases when the installation technology is followed. Therefore, it is necessary to clarify which defects are included in the warranty list. Most often, with a loss of performance during a technology violation, errors must be eliminated at one’s expense. When choosing a profile for siding, it is necessary to take into account that it must be produced by the same company that was engaged in the manufacture of the finish itself. This applies to ebbs, corners and platbands, as well as other elements that can not be avoided during the installation process. This ensures ease of work and ensures a high-quality connection of panels with additional elements.
Features of the choice of insulated siding
Today, even insulated siding is presented on the building materials market. This material allows not only to simplify installation work, but also to reduce costs. First of all, when using it, you do not have to purchase additional thermal insulation, among other things, you eliminate the need to install a counter grill, which is required to install insulation material. When choosing this finish for your home, you should consider that it can be vinyl, fiber cement or metal. The last two varieties are considered the most durable compared to the first. This is due to the fact that such materials are practically not deformed and are not afraid of exposure to the sun. The vinyl siding warmed is characterized by not so impressive term of operation. If you decide to use the described paintings, then you should not purchase a regular profile, trying to replace it with an angular warmed one. This will certainly cause bridges of cold. The inner corner profile does not have to be insulated, but it must be leveled with an additional crate.
If you decide to choose insulated sheets, then you should remember that the siding elements should be more reliable, since the thermally insulated finish is thicker compared to any other. For this reason, special additional profiles should be used for it, among which angular, starting and finishing can be distinguished. If you decide to use ordinary profiles, then the complexity will be more, since at the junction of the profile and the panel it will be necessary to cut the insulation. This leads to the fact that the siding and its components must correspond to each other.
Siding Dimensions
Having visited the building materials store, you will have to choose the siding options. There are no standard sizes, so each manufacturer sets the dimensions independently. The length of the panel can vary from 2.5 to 4 meters, the width varies from 20 to 30 cm, as for the thickness, it can vary from 1 to 1.2 meters.
Material cost
If you decide to use siding for home decoration, you need to know the sizes and prices before going to the store. Dimensions have been described above, but you can buy paintings at a cost of 184 rubles per square meter, this applies to vinyl siding brand Docke. Vinyl siding from the manufacturer "Tecos" will cost slightly more, the price starts from 239 rubles per square meter. As for the basement siding, it costs much more, it can be purchased for 1048 rubles per square meter. If you decide to purchase metal siding, you can find out the sizes and prices by reading this article. Thus, you will have to pay 421 rubles per square meter of such material.
Conclusion
When choosing a siding and its components, you must consider many factors that were presented above. Only in this way will it be possible to acquire material that will serve you for a long time, until you have a desire to change the facade decoration.