Heater “Tepofol”, reviews of which, perhaps, will allow you to understand what advantages and disadvantages the material has, is made of foamed polyethylene. Its surface is foil. The thermal insulation itself has reflective properties and has a closed porous structure of polyethylene foam. In addition to thermal protection, it provides noise, steam and waterproofing. This allows you to save on construction, as one material is able to protect against several adverse events at once.
Customer reviews of the varieties of Tepofol
"Tepofol", reviews of which quite often only the most positive, presented for sale in several varieties. Each of them is indicated by a certain letter, which indicates quality characteristics. According to users, under the letter A, the manufacturer makes Tepofol with a reflective coating, the last of which is aluminum foil. Sometimes it is replaced by a polished metallized film.
Consumers quite often choose the insulation “Tepofol”, which is indicated by the letter B. It has a double-sided coating of aluminum foil and metallized film. As users emphasize, self-adhesive material is indicated by the letter C. By the way, on the one hand it has an aluminum coating, on the other - a metallized film. On sale you can meet “Tepofol”, which has the name “Metal”. In this case, a metallized film is used as the reflective layer . If necessary, you can purchase NPE. It is a foam polyethylene backing.
Reviews of specialists about the areas of use and application features
Thermal insulation "Tepofol", reviews of which you can find in this article, is used for noise, moisture, heat and waterproofing of surfaces in saunas, baths, and also attics. Suitable material for walls, floors and ducts. According to experts, often this insulation is used to form heat-reflecting screens behind heating batteries. The scope depends on the thickness of the material, the variety of layers and their quantity. The more difficult the conditions of use, the more outstanding will be the characteristics of the insulation. For example, as experts emphasize, to insulate the facade and roof, it is best to purchase a Tepofol insulation of maximum thickness. A reflective surface will be placed on its two sides.
Tepofol, reviews of which, perhaps, will allow you to make the right choice, is also used in the arrangement of floors. The higher the load on the coating, the more impressive thickness the material should be chosen. Professionals are advised to buy Tepofol with a self-adhesive layer for home craftsmen. It has high adhesion to most substrates. Therefore, working with the material is extremely simple. When installing thermal insulation, the reflective layer must be placed on the side of a warm object.
Technical Specifications Reviews
Whether you are a specialist or a home foreman, you may be interested in the technical characteristics of the Tepofol insulation. For example, the water absorption of the material can vary from 0.6 to 3.5%. This, according to professionals, is a good indicator. The reflection coefficient of the surface reaches 97%. And you can use insulation at a wide temperature range: from -60 to +100 ° C.
The Tepofol insulation, reviews of which will be useful to read before purchasing the material, has a thermal conductivity coefficient. It is limited to 0.038 ± 0.001 W / m * ° C. The specific weight of the web varies from 34 to 35 kg / m 3 , but the vapor permeability coefficient is 0.0011 mg / m * h * Pa. According to experts, before buying insulation material, it is important to pay attention to its ultimate compressive strength. In the described case, this parameter is equivalent to 0.035 MPa.
Size Reviews
It is important not only to install the insulation correctly, but also to choose the thickness and length of the material. The first parameter varies from 2 to 10 mm. This, according to customers, is very convenient, since you can choose the thickness depending on the objectives pursued. But the length of the roll can be equal to 15 or 25 m. As for the width, it is 1.2 or 1.05 m. Buyers say that these parameters make it easier to prepare and strengthen the material to the surface.
Why choose Tepofol: customer opinions
Tepofol, the reviews of the masters about which you can read in the article, can be used in heated buildings and houses without heating. Thanks to the opinions of professionals, we can conclude that the material is characterized by high thermal insulation performance. And the foamed structure of polyethylene increases the soundproof ability, which is expressed in noise absorption of 32 dB. For the reason that the water absorption of the described product is equal to only two percent, this makes it possible to use it as a thermal insulation and waterproofing layer.
Among other things, if you insulate the surfaces, they will not lose their ability to breathe. Also for this reason, according to customers, this thermal insulation can act as a vapor barrier. If you count, it turns out that the consumer saves three times. The use of Tepofol has a positive effect on the indoor microclimate of the room. The building maintains optimal temperature, a person does not experience the effect of suffocation, because the penetrating ability of the material is quite high. "Tepofol" foil has a small thickness. That is why he is not able to pick up the volume of the room. Due to the insulating qualities, the wall thickness can be reduced, and the cost of the work can be reduced.
Usage Reviews
If you decide to use Tepofol for insulation of various structures, it is recommended that you read the material reviews in advance. Perhaps this will avoid many mistakes. From them you can understand that Tepofol is universal and has a wide range of models. The material can be used in residential and industrial construction, with thermal insulation of equipment and pipelines. From this insulation, a substrate is installed under the floor covering of the underfloor heating system.
If the material is laid with its reflecting side to the covering layer, then it will be possible to protect the premises from overheating in hot weather. Tepofol, the reviews of employees about which only the most positive, should be laid with special glue or a self-adhesive layer. If we are talking about a two-way product, then to the frame structure it must be fixed with brackets or nails. It is possible to use insulation even in rooms that are operated in conditions of high humidity. Consumers advise using waterproofing tape for waterproofing joints, which does not allow the reflective layer to interrupt.
Additional tips
It is important to strengthen the insulation by wrapping its reflective layer to the heat source. Often it is placed behind the plane of bimetallic radiators and other heating appliances. In this case, thermal energy will remain indoors. When the Tepofol is mounted in front of such equipment, it is important to leave a space 2 cm thick. In this case, the thermal insulation will not overheat, and its quality characteristics will not be lost.
Conclusion
Tepofol, reviews and photos of which are presented in the article, consists of 4 layers. The first is polished aluminum foil, the second is foamed polyethylene, the third is a high-volume adhesive layer, while the fourth is a protective film. Such a combination allows Tepofol to act as a barrier to heat loss, including convection, heat radiation and thermal conductivity.