Kleimer is a mounting bracket made of galvanized iron or spring steel. Such hardware is used when installing lining, MDF or plastic panels. The use of these parts allows you to make the installation hidden, so on the surfaces of the finishing material will not be visible parts for connection. The sizes of the claymers for lining should be selected before starting work. If you decide to use the described brackets for installing the lining, then you first need to install them in the existing grooves, after the master carries out the fastening of the crate using self-tapping screws. In the market of building materials today you can find kleimers of different sizes. You can choose fasteners of 1 millimeter or very large, the dimensions of which reach 6 millimeters. The choice will depend on the thickness of the facing material. If you are thinking about how to fix the lining to the wall, then you should know that using such hardware, you can increase the speed of finishing work. Among other things, as an additional advantage, there is the absence of the possibility of damage to the paintings during the installation of fasteners.
Why choose Kleimers
The described fasteners for lining today are so common among consumers for many reasons. Among others, the possibility of installation work in a room, the conditions of which are characterized by a high level of air humidity, can be highlighted. Among other things, such fasteners are quite simple to use, even an employee who does not have enough experience can manipulate. Using these elements, you can choose in the store exactly the kind of one that is suitable for a particular type of lining. The wizard will not need to purchase additional components. Kleimers are distinguished by the presence of a corrosion-resistant coating, which ensures durability and reliability.
Determining the number and size of kleimers
The sizes of claymers for lining are a very important parameter. To fix the hardware, you will need to prepare small nails or screws. Before starting work, you should determine the number of fasteners and its dimensions. Thus, to handle even areas it will be necessary to prepare four fasteners, the dimensions of each of which vary from 1 to 2 millimeters. The distance between them may be 400 or 500 millimeters. Choosing fasteners for lining, which will be installed on the corner sections, you should prepare six fasteners with the same dimensions. While the distance between them decreases to 250 millimeters.
The main sizes of kleimers
In order to determine which staples for lining are needed, you need to know the height of their tongue. Having visited the store, you will be able to purchase a lining of various thicknesses, each of which corresponds to a size clamp. Thus, for plastic or MDF lining, fasteners should be used, the height of which varies from 1 to 2 millimeters. If you intend to use eurolining, then the only right decision will be to use brackets whose height is 4 millimeters. Before attaching the lining to the wall, you will need to choose the right fasteners. For example, to fix chipboard panels, brackets with a height of 3 millimeters will be needed. For wood lining, elements should be used whose height is equivalent to 5 millimeters. When installing a block house, the masters use a staple height of 6 millimeters.
Preparing to install the lining
Indoors, the described finishing material can be installed both vertically and horizontally. As for a room with a high level of humidity, then under such conditions the installation is carried out exclusively vertically. This eliminates the delay of condensate in the grooves of the lock connection. On the external walls of buildings, the lining is installed horizontally, while work should begin from the bottom. In order to prolong the duration of operation, such panels should be treated with mastic made on the basis of polyurethane.
Work on the installation of the crate
After you have determined what sizes of claymers for lining will be used, you can begin to install the crate. Before this, it is important to determine in which plane the trim elements will be mounted. If the panels are supposed to be installed horizontally, then the rails are mounted vertically. The step between the elements should be 0, 5 - 1 meter.
The main condition for preparatory work is the creation of a vertical plane from the rails, which will form a flat surface. If the size of the Kleimer for eurolining is correctly selected, this will guarantee 50% success. In the example, we will consider the case of vertical arrangement of the elements of the crate. Initially, two vertically oriented racks should be installed in the corners of the room. In order to ensure the installation of these components in one plane, the laser level should be used. This tool allows you to accurately determine the contour that describes the vertical plane. If there is no level, you can fill the rail along the wall, install it right next to the surface. From it in each corner a plumb line is installed, which will indicate the place of installation of the racks.
Features of the work
After that, two racks are mounted, the fixation of which is carried out directly to the wall using self-tapping screws. However, the top rail may remain in place. Between the extreme elements you should pull a strong thread in several rows. On a rope every 50 cm it will be necessary to install intermediate posts fixed to the wall with self-tapping screws. After the crate is installed, it is recommended to treat it with an antiseptic solution. Self-tapping screws for kleimers can be selected at the same stage.
Lining installation
Once the sizes of the claymers for the lining have been determined, you can begin installing the panels. If the canvases are arranged horizontally, then they should move forward, starting from the bottom. We mount the lining in the vertical direction, you need to start installing from any angle. Each lining is fixed to the neighboring one through a lock connection. When using kleimers, one end of the bracket should be inserted into the groove of the lining, while the other is fixed to the crate. Mounting can be done not only with screws, but also with nails.
Conclusion
If you decide to use kleimers for lining, the price of which is 60 rubles and above, then it is especially important to use the construction level during installation works. This will ensure evenness of the entire surface and make the finish as aesthetically pleasing as possible. Among other things, if the lining is made of wood, then improper installation of the material over time can lead to some problems associated with the loss of humidity of panels, which will shrink unevenly, and the lining will require repair or complete replacement. If you do not have experience, then it is recommended to entrust this kind of work to a professional.