Modern chainsaws can not only saw wood. This is a universal device that can be adapted to fulfill the widest tasks. If desired, an ordinary chainsaw can be used as a pump, motor drill, boat or bicycle engine.
In terms of breadth of possibilities, not a single tool can compete with them today. If there is additional equipment, the saw can pump water from wells or wells, cut stone, metal, and pull cars stuck in snow or mud.
All this is possible thanks to attachments. Accessories for chainsaws can significantly expand the functionality of this tool.
A few words about the capabilities of modern devices
These tools use a rather powerful, but at the same time small-sized gasoline engine.
Together with the power unit, a maximally sealed fuel system and a membrane carburetor work. All this allows the device to perform the widest range of tasks.
On the output shaft of the engine, you can fix various nozzles for chainsaws, allowing you to do anything. Another plus of such gasoline tools is increased mobility. Work can be done anywhere.
The chainsaw has a very successful design. A breakdown of this system is a very rare case.
Nozzle types
If you have a chainsaw, but you donβt know how to use it, and all the firewood has already been cut, then this information will help you use the gasoline tool in full.
Nozzles for chainsaws allow you to solve almost any problem. There are a lot of species.
So, there is a device that allows you to cut wood in a horizontal plane. With its help, you can cut the log into equal parts. In this case, the frame structure of this device can provide the necessary rigidity.
Another nozzle allows you to cut logs in a vertical plane.
Despite its simplicity, the accuracy of cut with this accessory is very high.
Using a gas cutter, it is very convenient to cut and saw a wide variety of metals and stone - this is the same Bulgarian, but mobile.
Debarkers for chainsaws make it possible to clean logs from bark or various growths. Also, the device is used to cut cups, various grooves and recesses. There are two types of nozzles. So, there are drum debarkers and disk.
A winch can help to pull a boat out of the water, a car stalled in the mud, move various heavy objects or building materials. The winch with the help of additional equipment has a high pulling force and can change the trajectory of movement.
The water pump is a real gasoline centrifugal pump. Its power is 5 liters per hour. This is enough to pump out water from the cellar or to water the summer cottage. The advantage of this nozzle for chainsaws is mobility - you can use such a pump everywhere and under any conditions.
A motor drill can drill holes for winter fishing, and can also create holes up to 35 cm deep.
Also, a special tool helps to convert a chainsaw into a motor for a boat.
A saw cutter easily turns a saw into a saw cutter, and a mini sawmill will help you cut wood in a variety of ways.
Koroder
If it is necessary to remove the bark and growths from the wood, use a coroder. Nozzle, chainsaw and this device will also help in cutting cups, various grooves of any configuration. Also with the corroder you can plan logs.
This nozzle is very simple and extremely reliable. Installing it on a chainsaw will take no more than five minutes. Logs after processing are of high quality. The speed of the nozzle is very high, and the same processing of logs manually is a rather long process.
Bark beetle
This is nothing more than a milling head, but not simple, but special.
It is used when you need to process logs, boards or beams. This nozzle, like the previous one, helps cut grooves or cups in a log.
This attachment is manufactured and sold with a special belt. The nozzle may not work with all models, but only with those where the asterisk has 6 rays. When the task is rough grinding of wood, this is what will help to do it as quickly and conveniently as possible.
"Mower"
With this device, you can easily mow the grass on the site. Moreover, in a private house a chainsaw is sure to be found in a garage or utility room.
This is the Stihl chainsaw tip. And for saws from other manufacturers, there is an option to manufacture such a system for an individual order. At a cost of up to 2500 p. - This is a great thing for a private home.
Bark Remover
This accessory will help to clean just cut or sawn logs from bark and knots. Debackers, as these nozzles are also called, will help sharpen any stakes, as well as greatly facilitate all types of work where an ax is needed.
The product is relevant in the construction of log cabins. The system is installed in a standard place of the chainsaw. The case of this accessory is equipped with additional protection. The only thing is that it can not be used with any saw.
Chainsaw boat motor
Gliding and displacement boats, whose transom height is less than 38 cm, can be equipped with a real gasoline engine. Easy installation, ease of use, affordable price - all this makes this attachment a great purchase.
Chainsaw nozzle for chainsaw
This tool is used for cutting metal. This system is also used for abrasive processing of metal or stone products, as well as for cleaning welds.
These accessories work thanks to cutting wheels with a diameter of less than 20 cm.
Also, for cutting metal, you can use the nozzle "grinder". From the name itβs clear why this device can be used. The system works with a belt drive.
Winch
This is a real winch that can help when lifting various loads to a height.
These loads can be quite heavy. It is also a must have item for motorists who love extreme driving in extreme conditions. The nozzle is easy to install, as well as compact in size.
With a combination of a winch and a plow, land cultivation at a summer cottage is significantly accelerated.
Motobur
Using this device, holes are drilled in the ground or in a layer of ice. The diameter of the hole is up to 40 cm. Motobur is an indispensable acquisition for those who are seriously interested in winter fishing.
Brush cutter
This thing is used to remove bushes and twigs. This is an ideal solution for those who care a lot for plants. There are electrical devices that provide the same capabilities, but these chainsaw heads are highly portable, which is a significant advantage. High power speeds up work.
Longitudinal cutting of logs
This accessory is a small, compact sawmill. It is very convenient in traveling conditions.
The power-saw bench is autonomous, which means it will help in work where there is no electricity.
Alternative ways to use the device
Owners of modern chainsaws just saw firewood with this tool.
And with the help of this simple tool, you can make a real motorized bike - and these will not be Chinese motor wheels. The attachment allows you to make a powerful vehicle out of a regular bicycle.
There is also a nozzle for building a light helicopter or paraglider. In the household, this does not help, but it proves once again that this gasoline tool has great potential.
With the help of these nozzles and devices, many types of work can be significantly facilitated.
Many tasks are greatly simplified. A chainsaw is a highly mobile tool, and with adaptations it turns into a multifunctional system that easily replaces much, if not everything necessary in a private country house and household.
Today, with the help of special accessories, you can easily create a walk-behind tractor from this cutting tool and process it with earth. The price of most of these nozzles is more than affordable (an average of up to 2500 rubles). At the same time, the cost of the same devices, but stationary - is high.
So, we found out what nozzles for gas saws exist and what they serve for.