The facade tile "Canyon" is also called facing artificial stone. This material is used as a composite finish to protect facades from the negative effects of the environment. If you want to ennoble the look of your home and make the house warmer and soundproof, then the mentioned solution will be the best.
Positive reviews
According to users, the facade tile "Canyon" is able to increase the thermal insulation of the building by thirty percent and above. The final figure will depend on the material at the base of the walls. To use which finish can be for a long time, as practice shows, the cladding can last more than fifty years. The material is versatile. It can be used for wall cladding both outside and inside the building.
Home masters note that installing products is quite simple, and you can do this at any time of the year. You can fix the material to the wall from any material. Buyers really like that products can be made in imitation of stone, masonry or brick, as well as any other natural material. Having familiarized yourself with the assortment, you can choose a specific color, the shade of which will correspond to the exterior and design of the building. You may not have a question about whether the tiles are suitable for concrete, wood or brick. Since the products "Canyon" can be attached to any of the listed bases.
Users very often compare this tile with natural stone, but the latter is much more expensive and also has an impressive thickness, which is why it is difficult to cut. This can not be said about the described tile, which is characterized by ease of processing, low weight and small thickness. The last parameter can vary from 1.5 to 5 millimeters.
Why choose the Canyon tile?
Facade tiles "Canyon" does not have a strong effect on the foundation of the building, which sometimes needs to be strengthened, which is true when it is necessary to finish the external walls with natural stone or any other heavy material. On sale the described tile is presented in a variety of forms, here we can include products with metal mounts that facilitate the installation process. This finish copes with frosty weather, rains and can be wet cleaned.
Mounting technology
The facade tile "Canyon" is installed on the crate, for which you should prepare a board with a section of 100x25 millimeters. You can apply a galvanized profile of 67x28 millimeters. In the first case, the elements are treated with antiseptics, which must be done before they are installed on the wall. When the frame system is installed on a wooden wall, wood fasteners , the length of which varies from 70 to 100 millimeters, should be used to fasten the battens.
If the crate is supposed to be installed on a concrete, brick or stone wall, then for fixing, an impact dowel should be used, the length of which is from 100 to 150 millimeters. When choosing a species of wood for the frame, it is best to stay on a pine tree, as it is easy to process, it is easy to screw fasteners and cut into it. Such boards do not change their initial linear dimensions when the temperature changes. When the “Canyon” facade tile is installed, reviews of which are often quite positive, the distance between the boards will depend on the size of the products that you want to attach.
Specialist recommendations
Given the fact that the walls are not always perfectly even, when installing the frame, it is best to use stands in the form of wedges. If the walls have impressive irregularities, then it is best to make a crate of galvanized profile, which is installed on perforated consoles. This type of fixture allows leveling the plane.
Surface marking
Installation of facade tiles "Canyon" is carried out only after the installation of the frame system, for this it will be necessary to carry out marking. First, a control line is drawn along which the master can navigate when installing the first row. If the length of the walls is large enough, then a two-meter level for drawing the starting line will not work. To do this, prepare the hydraulic level. At the desired height, a control mark is set, which is then transferred to all corners of the building. Between the marks to draw a line using a masking cord.
Methodology
The facade tile “Canyon”, the photo of which can be found in the article, is mounted on galvanized self - tapping screws with a press washer. For the metal and wooden frames, the screws will be the same, but for galvanized profiles, you should choose not pointed ones, but with a gimlet. It is necessary to begin installation work from the bottom corner, moving to the side and up. The first product is fixed on four screws, while the subsequent ones are fixed on two. This is due to the fact that you will use lock connections when installing.
Each row of installed products must be checked with a long level in order to follow the common line and not violate the geometric proportions of the finish. The Canyon facade tile is quite common today among owners of private houses; home decoration with its help can be done by each master independently. It is important to consider certain features of the technology. For example, to finish the corners you need to stock up on corner elements. If it is necessary to fit the products in the corner, the tile should be cut with a diamond grinder. For processing the described material should use discs with finer spraying.
For reference
If the house needs warming, then initially it is necessary to make a crate for insulation, using bars of the required thickness. The distance between them should be 5 millimeters less than the width of the mineral wool. As soon as the facade insulation is installed, it should be covered with a vapor barrier film, which is nailed to the crate system with a stapler. After you can proceed with the installation of the frame for the tile.
Alternative mounting method
Today for sale a wide assortment of “Canyon” facade tiles is presented, installation on the self-tapping screws of this material is not always done. If the walls are fairly even, then you can use a glue solution to install the products. With its help, work can be carried out in the shortest possible time. However, if there are even the smallest surface irregularities, then the consumption of the adhesive solution will be increased, which will lead to additional financial costs.
Initially, marking is carried out according to the same technology that was described above, and then you can start laying the material. Sometimes the walls need additional preparation, they are coated with a primer to increase the adhesion of materials. Do not start work if the surface is highly porous.
Conclusion
The facade tile from the manufacturer "Canyon" has a concrete structure, which is why it is not exposed to fire. This feature of the finishing material is relevant for private homes. After completion of installation work, the walls will be protected from fire. Such facades are several times stronger in comparison with facades equipped with vinyl siding. If you decide to use the wet method of fixing the finish, it is important to remember that you will not be able to insulate the walls, as well as make the dew point outside the facade, which is necessary in order to prevent freezing of the walls.