For many years, Henkel has been manufacturing a wide variety of products that are marketed around the world. Among its brands, one of the most popular can be distinguished - Ceresit, the plaster of this brand is not in demand by consumers, because it is presented in a large assortment and has outstanding quality characteristics. By visiting the store, you can pick up the composition of a variety of purposes. This product is in demand also for the reason that the plants for the production of plasters of the Ceresit brand are scattered across many countries of Eastern Europe, including those located in Russia. This indicates an acceptable cost compared to similar products. If you are interested in Ceresit products, plaster, for example, then you can choose a mixture that is used for a variety of purposes.
Depending on the composition, with the help of plasters it is possible to repair chips, joints or cracks, as well as eliminate defects in the base. Plaster can become rough alignment on masonry and monolithic surfaces. It forms the topcoat, equips insulating facades and decorates the exterior and interior walls. Depending on the purpose and desired effect, Ceresit brand plaster can be applied with a layer of 2 to 30 mm by machine or manual.
Main varieties
An astringent acts as the main component of any plaster, a variety of which determines the purpose and properties of the composition. In the range of the manufacturer you can find a variety of types of plasters, among them the decorative acrylic "bark beetle" plaster Ceresit, which is used for decoration of interiors and facades. Its structure is dispersive, it has the most various decorative inclusions, with the help of which it is possible to form a relief or smooth surface.
These mixtures are available in finished form and do not require mixing before starting work. Silicone compounds are also designed for thin-layer decorative finishes, which form a vapor-permeable layer that allows you to maintain the properties of breathable substrates, including wood, plaster and cement. Among other things, silicone putties are resistant to the emergence and development of microorganisms, have the quality of self-cleaning, therefore, they can be used in the most difficult operating conditions. Ceresit plaster is offered for sale in the form of ready-made silicate pastes, which are mainly used for decorative decoration of external walls and surfaces inside buildings. Conditions can be unstable and complex, they are typical for balconies, bathrooms, as well as kitchens.
The formed surfaces perfectly cope with the effects of high humidity, temperature changes and have elasticity and strength. Universal are dry cement putties, which are applicable for the alignment, repair and decoration of mineral substrates. Universality is confirmed by the ability to use the mixture both outside and inside buildings. This type of plaster is the most reliable and inexpensive, excellently resists external influences and is easy to apply by hand. If you are interested in the Ceresit brand, mineral-based plastering of lime and white cement can be used as a universal material for all kinds of work. In this case, the composition has high qualities of adhesion to surfaces of different materials. In order to make it easier for the consumer to make a choice, it is worth getting acquainted with the most common products of the described brand.
Properties of popular Ceresit plasters for repairs
To decorate the facade, you can use the Cerezit ST 83 mixture, which is a repair composition for filling cracks, getting rid of potholes and other defects, the depth of the latter can be more than 5 mm. Among the qualities of the mixture can be distinguished resistance to water and moisture, wear resistance, resistance to high mechanical loads, frost resistance and environmental friendliness. In view of the above qualities, this mixture can be used without coating. The formed layer may have a thickness of 5 to 35 mm in one go.
Leveling plaster
Along with other products of similar purpose, Ceresit products are on sale, the plaster of this manufacturer can also be used for leveling. As an example, we can consider CT 29, which is applied to mineral substrates and is intended for subsequent finishing. This cement mix perfectly fits on cement-sand, cement-lime, concrete and brick walls. It is suitable for filling small defects and is applied with a layer of 2 to 20 mm. Among its characteristics: vapor permeability, weather resistance, excellent adhesion to mineral substrates, environmental safety and high ductility.
For reference
Leveling plasters for the facade have reinforcing fibers. They are necessary to increase the mechanical strength of the formed layer.
Features of applying a leveling mixture
Application should be carried out on clean and dry surfaces, which are first treated with a primer of the same manufacturer. If you performed patching and got rid of seams and joints, then you should withstand three days before leveling. After preparing the solution, it should be consumed within 60 minutes, since after this time it loses its viability. 30 minutes after application, the base is smoothed with a plastic grater, and painting or laying on the surface of decorative plaster is carried out after 3 days.
Decorative finish
Ceresit ST 35 plaster is used just for decorative finishing of surfaces. This thin-layer composition is offered for sale in two varieties, each of which has its own grain size of the filler. The first of them has a maximum fraction of 2.5 mm, while the second is 3.5 mm. A mixture is used to form textured bark beetle surfaces. As a result, it will be possible to obtain a layer resistant to shocks, frosts, and also capable of passing steam. The mineral composition is made in several shades, including classic white. If Ceresit plaster, the properties of which were described above, is used as a rough surface for further painting, you can purchase a cheaper option, which is less whitish.
Stucco CT 137
This pebble decorative mixture has a grain size of 1 mm and 2.5 mm. It must be applied in the form of a thin layer coating on the internal walls and facades. The composition can also be used on insulated polystyrene foam and mineral plates walls. The plaster is vapor-permeable, frost-resistant, weather-resistant, strong enough and absolutely environmentally friendly. It has a white color, after drying it forms a coating with a granular structure in the form of pebbles pressed to each other.
Acrylic plaster of the brand Ceresit CT 77
Ceresit decorative plasters are available in a large assortment. In the product line you can find Ceresit CT 77, which is represented by a mosaic composition with multi-colored crumbs. Stone inclusions have a fraction ranging from 1.4 to 2 mm. Having examined the samples of Ceresit decorative plasters, you can choose one of 38 color schemes. CT 77 can be used for indoor and outdoor use; it adheres well to cement plaster, drywall, chipboard or concrete. The polymer binder has a transparent structure and does not drown out the shade of quartz or marble chips, which can be artificially created or natural. In the first case, polymer dyes are used. After drying, the coating gains high wear resistance, copes with atmospheric effects and exhibits abrasion resistance. Walls can be washed during operation, and they will retain their original appearance for a very long time.
Characteristics of plaster Ceresit CT 24
Plaster can be used for the “Cerezit” cellular concrete, the features of the material CT 24 should be studied by you before starting work. The material is plastic, suitable for exterior and interior use, and is used for leveling and plastering surfaces of aerated concrete, gas silicate, and foam concrete. You can use the mixture to fill chips, sinks and other defects in lightweight concrete. In one approach, the mixture can be applied in a layer of 3 to 30 mm.
Properties of Ceresit CT 64 Plaster
The review of leveling and decorative plasters “Ceresite” presented in the article cannot be imagined without the polymer composition of the CT 64 brand. The composition is intended for the formation of decorative thin-layer coatings during external and internal works. The base must be leveled, making sure of its strength and low level of humidity. Walls should be cleaned of impurities, freed of substances that could reduce adhesion, and also removed lubricants, paints, grease and dust. If the walls have large cracks and irregularities, then their filling is preliminarily carried out with the composition of Ceresit CT 29. When carrying out internal work on gypsum substrates, make sure that their humidity does not exceed 1%. Previously, such surfaces are coated with a CT 17 primer, and then with a CT 16 primer. The coating of lime paints and adhesive mixtures must be completely removed before work.
CT 64 Usage Reviews
According to users, the application of plaster on the surface should be carried out using a stainless steel grater, holding the tool at an angle of 60 ° to the surface. As soon as the plaster ceases to adhere to the tool, the texture can be formed using a plastic or wooden grater. Users emphasize that work on the same surface must be carried out continuously, following the “wet on wet” rule. If there is a need to interrupt the work, then along the line where the plaster layer ended, a self-adhesive masking tape is strengthened.