"Kalmatron", the technical characteristics of which will be described below, is a protection for materials of buildings and structures from water permeability, industrial and climatic corrosion, as well as other environmental influences. The composition can be used to protect buildings under construction and new ones.
Description
Waterproofing "Kalmatron", the technical characteristics of which must be studied by the consumer before purchasing the goods, has many advantages. Among them, an attractive ratio of quality and price should be highlighted.
The composition of "Kalmatron" is easy to use, it is explosion-proof, fireproof and non-toxic. Among other things, Kalmatron manufacturing enterprises are located in different regions, they are in close proximity to the main consumers, which ensures compliance with delivery schedules in any quantities. At the same time, transportation costs can be minimized. The composition of Kalmatron, whose technical characteristics are unique, is resistant to mechanical stress, it is effective at reverse and direct high hydrostatic pressure.
Area of use
With the help of the Kalmatron composition, it is possible to effectively eliminate leaks, restore the waterproofing properties of the surfaces of foundations, which consist of foam, aerated concrete, concrete, reinforced concrete, brick, but concrete and rubble stone. It is possible to carry out waterproofing works during operation or at the construction stage. Designs after processing receive the qualities of increased frost resistance, since their structure becomes less porous. Automatic suction and water absorption are reduced, and strength characteristics are increased, as well as their bearing capacity. You can use Kalmatron waterproofing at facilities where the level of the acid-base balance is in the range from 3 to 11.
Features of the use of the composition
Waterproofing "Kalmatron", the technical characteristics of which are described in the article and will allow you to eliminate errors during the work, should be applied to the prepared surface. To do this, the base is cleaned with a power tool or metal brushes, while a layer of plaster, cement and a dense film or paint should be removed. It is necessary to rid the base of the destroyed layer of brick or concrete, as well as other contaminants. Chemical milling will remove the cement film from the surface. If there is a crack on the base, then they must be cut into a cone, deepening about five millimeters. Their base is cleaned, and then a protective coating is applied. The surface must always be dry.
Technical characteristics of waterproofing "Kalmatron"
Kalmatron, whose technical specifications and description will help you make the right choice when purchasing waterproofing, is a gray powder with whitish inclusions. Its moisture content does not exceed 1% by mass. When mixing the solution using the Kalmatron composition, it is important to remember that the start of setting will occur no earlier than ten minutes, while the end of setting should be expected no later than 85 minutes. After 28 days, the strength will reach 28 MPa. Consumers may also be interested in the density, which will be observed after 28 days - it is 2400 kg / m3. When carrying out work using the Kalmatron compound, you should also know about water and gas resistance, the value of which varies in the range from 0.8 to 2.4 MPa. Using this product, structural strength will be increased by 27% or less. "Kalmatron", technical characteristics, the description of which is important to know before purchasing the product, increases the concrete brand in frost resistance by 35%.
Technical characteristics of the composition "Kalmatron-D"
In appearance, the composition is a loose powder of gray color. Humidity by mass does not exceed 1%, and the average bulk density is equivalent to 1300 kg / m 3 . This value can increase or decrease by fifty positions. The water resistance of the material will be increased by several positions, from 2 to 4, if you add this mixture when mixing the solution. Professionals are also interested in such a characteristic as the coefficient of sulfate resistance, it can be minimally equal to 0.92.
Features of waterproofing brand Kalmatron-D
Kalmatron-D, the technical characteristics of which are recommended to be studied before use, is intended to increase the strength of concrete up to 20%. The number of cycles of frost resistance of a concrete structure will be increased by 50 if this composition is added to concrete. In addition, thanks to the addition of Kalmatron-D, the service life of reinforced concrete structures is increased one and a half times compared with conventional concrete.
Kalmatron-Econom
"Kalmatron-Econom" is intended to reduce the cost overrun of the composition when its application is provided on the surface of a large area. In appearance, this composition is a gray powder with white inclusions. Humidity by mass does not exceed 0.1%. The setting can begin in thirty minutes. The frost resistance of the composition is equivalent to 200 cycles, but the tensile strength during bending is 3 MPa.
For reference
If the master wants to make a coating of rather large thickness, which especially concerns brickwork as a rough foundation, then the Kalmatron-Econom compound should be used, the technical characteristics of which were described above. It is suitable for filling cavities as well as strobes. When horizontal screeds of impressive thickness are arranged, ironing should be used with the help of the Kalmatron composition to increase the operational characteristics and surface strength. Moreover, the flow rate can vary from 1.5 to 1 kg / m 2 . Ground smoothing is carried out with a plastic or metal tool.
Depending on the desired results, you can choose the composition that is right for you.
Coating Care Tips
If you are interested in waterproofing "Kalmatron", the technical characteristics of which are presented in the article, then you should also know how to care for the coating. After application, the base must be kept in humid conditions for twelve hours. To do this, the surface is wetted with an interval of four hours. To exhibit higher protective properties, the coating should be allowed to mature in wet conditions. It is necessary to leave the surface for three days, this is especially important for substrates that will be used outdoors or under conditions of alternating wetting and drying. The applied coating must undergo a thorough stroke, only this way you will get a guaranteed result. Before purchasing a mixture, you can familiarize yourself with its consumption. So, about 1.6 kilograms will take per square meter if the layer thickness is equal to one millimeter.