Professional craftsmen, carpenters and furniture makers managed to appreciate the merits of the electric milling cutter. Today, they will never refuse this tool. And for home craftsmen, this equipment can also become a real helper in everyday life. But before making a purchase, you need to decide which model of the router to prefer.
It is also important to decide which manufacturer to give preference to. It is important to consider the status of the manufacturer among consumers. An excellent combination of good quality and affordable cost is provided by the Maktek milling machines, which will be discussed in the article. They need to be considered and compared in terms of characteristics so that the model meets expectations.
Varieties of milling machines
In order to make a choice, you should pay attention to the main varieties of milling machines. Among others, submersible models are also offered for sale, which are also called rod or vertical models, they are one of the most common. Using this equipment, you can create holes, grooves, chamfer, round, and mill a closed loop. Such devices are used in home workshops and production workshops.
Edge or edging milling machines perform groove sampling, chamfering, making grooves and cutting shallow recesses according to the template. As an example of such a manual milling cutter for wood “Maktek”, the price of which is 3890 rubles, is MT372 brand equipment. The power of this unit is 530 watts. The size of the collet used is 6 mm. The device weighs only 1.4 kg. The number of revolutions per minute reaches 35,000.
Another variation is the rotary milling cutter. It is designed for cutting holes in wood, plastic, drywall and ceramic tiles. With the help of such equipment you can process the edges. If you are only engaged in the selection of grooves, then it is better to prefer a lamella tool. A highly specialized version of the equipment is also a filler milling cutter, with which you can create paired holes. A similar unit is used in furniture production.
Varieties of power milling machines
When choosing a router, you can not be guided only by the cost of equipment, because in this case you run the risk of overpaying or purchasing a device that will not cope with the tasks. Therefore, one of the important characteristics should be considered power. The capabilities of the router are determined by it. The greater the power consumption, the greater the permissible diameter and length of the cutter that you can set. Higher power also indicates the possibility of continuous operation without overload.
With this parameter in mind, equipment can be classified into light, medium and heavy models. The power of the first does not reach 750 watts, and their weight varies from 2 to 3 kg. Medium models already weigh up to 5 kg, and their power is 750-1500 watts. Heavy milling machines can weigh 6 kg or more, and their maximum power is 2300 watts.
For regular work, it is better to purchase equipment with a power of at least 1500 watts. This device can easily cope with professional tasks. But when performing delicate work on edge processing, working with such a model will be quite difficult, especially for a beginner. At the stage of choosing a router, it is important to analyze the nature and intensity of work in order to find a middle ground. Your tool should be one whose power will not be excessively large, but it should be enough to complete the tasks.
MT360 brand milling cutter overview
This model of equipment is a device for removing bevels and edges, as well as milling grooves on wooden surfaces. The number of revolutions per minute reaches 22000. This allows you to achieve high quality processing. This device can work with different types of collets, among them:
Lateral emphasis will allow you to clearly and accurately perform parallel cutting.
Model Features
Considering the above Maktek milling cutter, you will be able to understand that it has quite outstanding technical characteristics. The working stroke of the cutter is 60 mm. The equipment weighs 5.5 kg. And the case length is 300 mm. The power of the unit is equivalent to 1650 watts.
The model comes in a box. Before making a purchase, you should pay attention to the fact that the unit does not have speed control and the ability to maintain constant speed under load. You will have to provide additional illumination of the workspace, because the manufacturer did not provide the router with such an option.
Consumer reviews about the model
The maktek "Maktek 360", according to consumers, has many advantages, among them are:
- accuracy of work;
- strength;
- reliability.
As for accuracy, it is provided by a depth gauge. Many consumers also pay attention to strength. It is guaranteed by a sole made of metal, which significantly extends the life of the tool. You can not worry about reliability. It is due to a special regulator with which you can clamp the side stop.
Consumers consider the advantages of the Maktek milling machine, the price of which is 10,340 rubles, to be lightweight, which allows working with the tool for a rather long time without getting tired. The cable has an impressive length. Consumers believe that this model is well equipped. Due to the lateral stop, you can perform precise parallel cuts.
MT362 Model Overview
The maktek "Maktek 362" is one more option of the equipment of the producer. This device is used for profiling, trimming, chamfering and grooving, as well as other wood work. The model has a powerful engine that provides high performance.
Easy access to the brushes is provided on the Maktek mill body, so the operator can easily replace them independently. There is no need to contact a service center for this.
Model Specifications
The power of the above equipment option is 1650 watts. The device weighs 5.5 kg. The number of revolutions per minute reaches 22000. The working stroke of the cutter is equivalent to 60 mm. The Maktek milling cutter is delivered in a box. You should pay attention to the fact that this unit does not have a soft start and backlight, as well as speed control.
Model reviews
Before tipping one's choice towards a particular milling cutter option, many consumers value the benefits. Among the positive characteristics of the manual milling cutter "Maktek", the price of which is 9100 rubles., It should be noted:
- protective screen;
- adjustment of the milling depth;
- reliable grip.
Buyers like that the design provides for the presence of a plastic transparent screen, which eliminates the ingress of chips in the face and on the operator’s clothes. You can also use the milling depth adjustment in the process. For this, the manufacturer provided screws with which you can set the depth.
It is impossible not to mention a reliable grip. The design has two comfortable rubberized handles. You can grab onto them with both hands. Before making a choice, be sure to read the reviews about the maktek milling machine. The described model is no exception. It provides a high rotation speed, which allows you to handle fairly dense materials. Some consumers, according to them, quite often are interested in the size of the base, which is 160 x 148 mm.
Overview of the MT361 router
This model is used for profiling grooves, trimming edges, as well as for other jobs where wood is involved. The model can be mounted on the upper support in order to carry out a tool change. The milling cutter can work with a guide rail, which provides the ability to make precise straight cuts.
Specifications
The above Maktek hand milling machine weighs 2.7 kg. The number of revolutions per minute reaches 27,000. The equipment is delivered in a box. Case length is 256 mm. The cable length is 2 m. There is no soft start in the equipment. Power is equivalent to 900 watts. This Maktek wood milling machine does not have the function of supporting constant revolutions under load, as well as revolutions adjustment.
Model reviews
Consumers highlight many advantages when considering a MT361 brand router, among which are:
- the ability to adjust the milling depth;
- Ease of use;
- reliable grip.
The depth range of wood processing varies from 0 to 35 mm. Convenience of work is provided by the small mass of the unit.
Finally
When choosing a milling machine model, it is important to pay attention to the spindle speed. The larger it is, the higher the quality of the processed surface. If you need high accuracy, then it makes sense to work at lower speeds.
When processing plastic, a slow rotation speed will be required, otherwise the working area will overheat and the material will melt. This suggests that the choice of the router should also be based on the spindle speed. In most models, this parameter varies from 20,000 to 30,000 rpm. However, on sale you can find slower and faster models.