You are not satisfied with the amount of expenses for utilities, and the cost of water is simply ruinous? So it's time to learn to save. This task was greatly simplified when a unique device appeared. This is a touch nozzle for tap to save water. This incredible work of engineering allows you to make water consumption by 70% less. The use of the device will save the family budget from leaking into the pockets of communal workers. The money that we managed to save is, one might say, extra income. The fate of this money will be decided by you, and not by the housing and communal services company.
The importance of saving water
The need for economical use of water is important both for the country's economy and for the economy of individual households. The tap nozzle for saving water is the result of the latest innovations.
Water in the world is constantly in short supply. Water saving has become very relevant. The nozzle on the aerator tap, in addition to reducing water consumption, makes its quality better. The use of high-quality materials that have undergone special processing has given the device high operational characteristics and corrosion resistance. In addition, water after its exposure acquires antibacterial and antiviral properties.
The nozzle on the kitchen faucet to save water is a brilliant modification of an ordinary nozzle-aerator for a water tap. He is one of the most popular products that can make life easier for ordinary residents of the city, significantly reducing utility costs.
The principle of operation of the aerator
The nozzle for a tap to save water in its design is based on the principle of mixing the water flow with air in the device itself.
When a stream of water passes through the narrowest point, pressure arises. The membrane, which performs the task of the expander, distributes the pressure throughout the space of the device using all the holes. This allows you to create a region of high pressure in the expansion membrane in its upper side. A special membrane device allows you to create a vacuum in its opposite part.
The difference in pressure in different parts of the device causes the outside air to rise into the aerator through openings located in the side of the device along the perimeter of the membrane. The jet of water is saturated with air bubbles. Thus, up to 70% of the water is displaced from the water stream.
The water jet is saturated (aerated) with air. The resulting mixture of air contains two parts, and water - one part. This effect allows you to achieve savings.
If the faucet is fully open, approximately 12 liters of liquid are consumed per minute in a conventional mixer. Nozzle on the tap to save water, which installed on the mixer, it allows to reduce water consumption by three times, and the pressure of the jet does not undergo changes, and the functionality of the tap even increases, since it is able to regulate the flow rate.
Benefits
In addition to the economic benefits noticeable to the naked eye, the purchase of a device for saving water has a number of other advantages:
- Lack of water hammer and splash in the stream.
- Constant flow rate in the presence of an aerator economizer.
- Work in two operating modes - for everyday needs and for accelerated filling of containers.
- The simplest installation.
- The use of specially treated stainless steel allows you to resist the appearance of deposits.
- The use of an aerator membrane for filtration.
- Compact device dimensions.
- Nice appearance of the device.
- The ability to change the angle of the jet of water.
- Ability to work with different cranes.
- Long term of work.
The water pressure is controlled by light pressure on the aerator in its lower part.
Water Saving Aerator: Mixxen Premium
One of the low cost solutions on the market is the Mixxen faucet nozzle, equipped with a pressure regulator. It makes it possible to make consumption less than 5 times.
The device is based on German technology, has a French certificate, and is manufactured in Ukraine.
This quality device is made of brass. It is suitable for cranes with both external and internal threads. The aerator can work in two modes - shower and jet.
You can control the water pressure through the lever located on the nozzle.
Service
The main requirement for the maintenance of the device is a categorical ban on the use of detergents. In addition, you can not immerse the aerator in water for a long time. If you need to clean the aerator, you just need to wipe it using a damp cloth.
The nozzle on the faucet to save water should not be tightened tightly, a small effort is enough to secure it securely.
An important factor in the quality of the device is that the crane has not yet expired the warranty period.
To increase the service life of the device, do not overload it, including water to the maximum.
Compliance with these requirements will ensure long-term operation of the device.
Where could I buy
A nozzle for a tap to save water is sold in almost every plumbing store. If you have not met there, look in online stores. On the network you can find many aerators for every taste at various prices from 2 to 16 y. e.
Very high-quality nozzles are manufactured by the Taiwanese company Hihippo. You can order devices on its official website.
How much can you save water?
Real-life testing and the experience of people who were fortunate enough to use an economizer attachment prove that it can achieve an average saving of almost 60% of water. Consequently, the cost of hot and cold water will be halved.
We decided to calculate the real savings by the example of washing dishes for a family of 4 people.
First we try to wash the dishes without an aerator. At the same time, we control the flow rate on the meter. The counter shows that 60 liters of hot water and 80 liters of cold were spent on washing dishes.
We repeat the experience using an aerator nozzle to save water. As a result of its use, water consumption has decreased due to its saturation with air - 20 liters and 20 liters of cold water have been consumed.
The result speaks for itself.
Touch nozzles
The latest invention of European specialists has already found wide application in the everyday life of hotels, restaurants and airports. After all, big business can minimize costs. Now, with the acquisition of the sensor nozzle-aerator, such savings have become affordable for you. Everyday life provides many opportunities for such savings: washing dishes, washing. The nozzle on the sensors acts elementarily simply: if you substitute your hands, the water starts to flow, you remove it - it stops flowing.
Touch Progress
Sensors for saving water have been invented for a long time, but they were expensive and were built into the mixer. Everything changed the appearance of the nozzle, installed in just a couple of minutes and costing much cheaper than faucets equipped with a sensor. Everyone can use the nozzle, and its use pays off in less than a year. With the change of residence, you simply screw the nozzle to install it in a new housing.
Benefit and Benefit
It is necessary to take care of water and protect the environment. In the same way, it is necessary to protect the health of your family. It is well known that we carry many pathogens of various diseases on our hands from common areas. And we also cook, make repairs. At the same time, going to wash our hands, we often open the tap with dirty hands. The new touch nozzle avoids the contact of dirty hands and the tap. You just need to put your hands under the tap - the water will pour itself. Without spending extra effort, you make life more comfortable.
Many people around the world have chosen touch nozzles and do not regret it at all.
Operating modes
The sensor nozzle is designed to operate in 2 modes:
- Manual, which is activated if necessary, fill the dishes with water.
- Automatic, working only when hands or objects to be washed fall under the tap.
The modes are controlled by a button on the front of the nozzle.
If you are using the nozzle for the first time, you must open the tap, adjust the water pressure and press the activation button. After a minute, the nozzle will begin to work in automatic mode.
Turn off the device
In order for the nozzle to turn off, you need to set the manual mode. To do this, you need to press the switch button once , and then turn off the taps. In this case, the green LED will glow for another minute, after which the timer will turn off the device.
In addition, the sensor nozzle has protection. When you put it into manual mode, the protection will work automatically if the water flows for several minutes.
In print
The nozzle on the tap to save water, the photo of which can be seen in the article, significantly reduces the leakage of money.
There are some nuances in the operation of the device. Even a small lead to the side is enough to stop the water.
True, these minor inconveniences were noticed only at first. Just two days is enough to adapt to working with the nozzle, and it gives only pleasure.
The nozzle is great for owners of centralized hot water supply or an electric water heater, which is configured to supply water of a certain temperature.
Where the water temperature is adjusted approximately, there may be some inconvenience.
For example, in the beginning very hot water can flow from the tap. In such cases, you need to either drain a certain amount of water until it cools down, or adjust the boiler to a lower temperature.
Another nuance is manifested if the boiler is located far from the tap. In this case, until the moment when the hot water begins to flow, it is necessary to drain the cold water already in the pipe between the boiler and the nozzle. This is not very good, as there are water losses, and savings are claimed.
Reviews
Analyzing the comments of people who used the nozzle to save water, it should be noted that everyone says that at first they were skeptical about this device. A lot of popular things are constantly being thrown onto the market, which turn out to be useless in practice. However, starting the operation of the nozzle, people were convinced that the device really helps to significantly save water, and therefore money. After all, the numbers in the payments have decreased. The benefits of using the appliance are especially noticeable if the family is large and water savings are more noticeable. The nozzle on the crane, reviews of which are the most enthusiastic, has now become very affordable.
Even for women with little understanding in plumbing, installing an economizer on a tap is not a serious problem. It is enough to familiarize yourself with a small guide - and you can put the device. A call for this plumbing is completely optional. It is surprisingly easy to install the nozzle on your own. After several weeks of use, many housewives liked the nozzle for a tap to save water. Reviews are only positive. It seems that the water began to flow more gently, without its inherent spray.