Classic vinyl glue is represented by high-quality adhesive, which is actively used for repair, decoration and domestic purposes. Most often, this tool is used for gluing wallpapers. The composition includes multifunctional polyvinyl acetate. Adhesive is used by experts in working with weighty vinyl-type wallpapers. Only high-quality adhesives with excellent fixing properties can reliably stick the selected canvas to the wall.
Classic composition
Realized vinyl glue can differ not only by the manufacturer, but also by the final target orientation of the adhesive. If the product is intended for fixing wall materials, then special starch with optimal antifungal properties, universal ether with powerful antibacterial inclusions, and a polyvinyl acetate type powder can be used as a base. Some manufacturers add a color indicator to the composition of vinyl glue, which allows you to control the uniformity of adhesive application. More expensive formulations boast a pleasant aroma.
Benefits of using
Vinyl-based glue is in great demand in the construction industry. This popularity is due to the fact that the tool differs from all analogues in the following advantages:
- The glue is resistant to the negative effects of moisture, which significantly expands the scope of its application.
- Optimum level of efficiency in relation to different materials.
- Excellent sliding ability, which allows you to most accurately dock the joined canvases.
- Dry glue can be stored for an unlimited amount of time. The finished composition is suitable for use no more than 8 days.
- After drying, the mass becomes completely transparent, does not leave lumps and spots.
- Safety for human health and the environment. Neutral alkaline level does not irritate the skin.
Material flaws
Non-woven vinyl glue has several negative characteristics that are associated with its improper use. The tool is designed to work with massive wallpaper. If the master decides to use vinyl glue for lighter finishing materials, then it is economically disadvantageous. In addition, the cooked mass has a fairly low permeability to air. That is why vinyl glue is most often used in multifunctional, non-residential premises. But all the advantages of glue significantly exceed its negative parameters, because of which professionals are actively using it.
Characteristics
Vinyl wallpaper glue sold today is one of the most reliable adhesives. The tool is actively used in repair and decoration works. Vinyl adhesive can be used to work with multiple wall materials. Most often, this wallpaper is on paper, bamboo, metal, velor, embossed, fabric, vinyl, structural basis. Excellent sliding properties allow you to align and dock the picture as qualitatively as possible. If the composition has not yet dried, then the master can safely separate the canvas from the surface and stick it again. The final method of application directly depends on the type of wallpaper. If the master has to work with uneven walls and heavy material, then the first thing the glue is applied to the base and allow it to soak. After 20 minutes, you can repeat the action and stick the strip.
Available Applications
The universal composition of vinyl glue allows you to use this material for decorative and natural stone, concrete, brick, plaster, as well as porous surfaces. Some species blend well with laminate flooring and classic ceramic tiles. Before applying glue, the working surface must be cleaned, degreased (with a special agent or solvent) and dried thoroughly. Glue is used not only for decoration of various rooms, but also for decoration of various interiors with the help of popular decorative elements. The tool is effective for attaching various materials to vertical, horizontal surfaces. Vinyl glue is suitable for wallpaper, as well as a wooden surface. Transparent, quick-drying composition is effectively used in the manufacture of prefabricated furniture.
Rules for the preparation of working solution
To prepare the vinyl adhesive for use, you must carefully dilute the dry powder with plain water. Proportions must comply with the attached instructions. The temperature of air and water should not be below +25 degrees. The powder must be mixed as thoroughly as possible. Only in this case will the appearance of lumps be avoided. The mixture must be infused during the time that is indicated in the instructions. Before gluing the paintings, all necessary preparatory work is necessarily carried out.
It is necessary to determine the free space on a clean floor. The canvas is leveled on the surface and lubricated with glue. It is best to use a clean, dry rag to crush the wallpaper. To improve the result, you can walk several times with a roller. All manipulations should be performed slowly and accurately, as there is always a risk of shifting the canvas, which causes wrinkles. If the edges of the wallpaper are a little puffed, then they must be additionally lubricated with glue and pressed against the wall. If there are screws or nails on it, then it is better to pull them out even before gluing starts or hammer them deeper. The most accurate you need to be in the place where the sockets are located, as well as the switches. To make the result look as neat as possible, you need to cut the required holes with scissors. To distribute all efforts as correctly as possible, two people should be involved in the work process. One holds the wallpaper at the top edge, and the other at the bottom. The canvas should go behind the baseboard, which is better to dismantle in advance.
Quality Composition Requirements
Modern vinyl glue for paper wallpaper should have the appropriate properties. Experts recommend paying attention to the following parameters:
- Environmental friendliness and harmlessness. All finishing materials and related compounds must comply with these requirements. Since glue has been used for processing wall coverings for many years, it should not emit toxic and irritating components. Modern manufacturers continuously monitor this parameter.
- Good solubility in plain water. Both the powder and the thick concentrate should quickly form a homogeneous mass. There should be no lumps or clots in the glue when combined with warm water.
- Universality. Glue for vinyl-based wallpapers can be used as a primer for coating plastered walls. This treatment is especially important for high-quality wallcovering with wallpaper.
- The intensity of drying. This parameter requires increased attention, since the master needs additional time to adjust the sheets. Thanks to this, it will be possible to fix some defects, align the picture, and also achieve the desired result.
The basic rules for choosing vinyl glue
To create a decorative finish pleasing with its appearance and long service life, you need to be as responsive as possible when choosing a product. The following parameters require increased attention:
- Adhesiveness. This is the degree of adhesion to the main surface, to the main surface. The strength of wallpaper fixation depends on this parameter. It is worth noting that the adhesiveness directly depends on the number of fractions of polyvinyl acetate for vinyl glue.
- Degree of adhesion. It can be primary and final. In the latter case, adhesion is presented, which determines the level of adhesion of the webs to the base after full drying.
Demanded manufacturers of quality compounds
Specialists have compiled a list of vinyl glue names that are distinguished by an affordable price and excellent performance characteristics. The greatest demand is for goods from major manufacturers such as Econ, Methylan, Pufas, Moment. The second option is distinguished by its versatility, since such glue allows you to work with all types of wallpaper. “Econ” deserves special attention, which over the years of its existence has been able to prove itself from the best side. The Pufas trademark is a proven German company, but it is quite problematic to find such vinyl glue in an ordinary hardware store. You can purchase affordable means of Russian production - Kvoliti, KMTS. Experts often use precisely these compounds for gluing various paintings. Regardless of the chosen vinyl glue, you must take into account all the recommendations and basic requirements that are indicated by the manufacturer in the attached instructions. Otherwise, the prepared composition will not have the necessary parameters. If the whole solution was not consumed at a time, then it can be used for another 8-10 days, after which the mixture can only be disposed of.