Although sink food waste grinders are gaining popularity, they are still not an indispensable attribute in the kitchen. With this device, you can reduce the amount of dry garbage by sending all leftover food to the sink. In this case, there will be no unpleasant odors, crumbs that could attract cockroaches. But such a device is quite expensive, so the choice of a disposer must be approached responsibly.
Varieties of choppers
Before making a choice, you need to determine which device is needed in the kitchen. Everything will depend on the principle of work, according to which the disposers are divided into electrical and mechanical. The latter work from water, which affects the pressure on a certain number of knives. They contribute to the crushing of garbage, which is then sent to the sewage system. Mechanical food shredders for the sink can be called completely safe, since the knives are at a certain distance from the drain hole.
Mechanical chopper
As for the electric grinder, it works on a different principle: it will be included as necessary. There are no knives inside the device, and garbage is crushed with special hammers. For the reason that the blade is missing, there is no risk of injury. The only drawback is the fairly high noise level. Among other things, such devices are inferior in effectiveness to mechanical counterparts. This is expressed in the fact that not all food waste can be recycled.
Connection Recommendations
If you are interested in food shredders for sinks, then after the acquisition it makes sense to save money by trying to install the device yourself. These works are carried out in several stages, the first being the need to turn off the water and disconnect the sewer system from the sink. The rubber gasket will need to be located on the flange, and then connect the mount of the new device to the sink, disconnecting the device itself.
When food shredders are installed for the sink, one end of the drain pipe must be connected to the disposer, while the other to the sewer pipe. The power cord should be pulled up to the outlet; the latter must be earthed. It is important to look into the equipment passport before carrying out work, as some manufacturers recommend using a separate line for installation. At the final stage, you can test the device by turning on cold water and using the "Start" button. By placing food waste in the sink, you can make sure that the device is working properly.
User Reviews
Users claim that some models presented for sale lack a separate switch. They work on the principle of portion loading. Once the tank is full of waste, you need to turn the cap of the neck. It is inserted into the drain hole in the sink and acts as a switch. As customers emphasize, if you are not satisfied with such a design of the disposer, it is important to pay special attention to the functionality before purchasing.
Repairing the Disposer
If you decide to purchase a food waste grinder for a sink, reviews of which are mostly positive, you need to remember that, whatever it may be, it is impossible to completely exclude the possibility of breakage. If you still need to remove the device, then repair must begin with a visual inspection, for which the equipment is disconnected from the network. After that, the master is recommended to use a flashlight to look inside the working chamber. The rubber petals are bent by hand.
If visual inspection does not allow to obtain results, then it is necessary to use a special end rod, which should be inserted into the hole of the appropriate shape, which is located under the bottom of the engine compartment. You can find this element in the central part of the case. The master needs to try to turn the shaft, after which you can try to turn on the chopper, while there is a chance that the working capacity will be restored.
The nuances of repair work
Interested in a food waste shredder for a sink? How to choose such a device correctly? First of all, you need to decide whether you are prepared for the fact that electricity bills will increase. If not, it is best to prefer a mechanical model.
In the event that the electric dispenser suddenly deteriorates - its engine does not move from the place when you press the "Start" button - it is important to pay attention to the fact that a slight buzzing should be heard, which indicates the movement of current through the windings. The lack of sound indicates that there is overload protection inside. It may be about overheating. The master can check the fuse integrity with a tester. If the disk is jammed, the device should be turned off, otherwise the heating of the windings will be so strong that the equipment will finally fail.
If the food waste chopper for a sink breaks down, it can, of course, be repaired on its own without contacting a service workshop. So, for example, checking the seals and their tightness can be carried out by each user, however, for this, it is necessary to disassemble the housing.
In addition, it is worth remembering that it is unacceptable to operate equipment without seals. Water may be inside, causing a short circuit. In this case, experts advise connecting the disposers using a differential protection device. The leakage current will increase, which will trigger the mechanism. Conventional plugs on the shield or thermal fuses will save from negative consequences. Among other things, the differential protection device will be an additional guarantee that no one will be shocked.
Hankel FCB 901D food chopper review
This sink chipper, priced at $ 190, has a diameter of 159 millimeters. The device is equipped with a pneumatic switch, and stainless steel acts as the material of the crushing chamber. The engine is capable of a maximum number of revolutions, which is 3300 in one minute. The power of the equipment is equivalent to 750 watts. The advantage is the possibility of continuous loading of food waste.
Disposer reviews Weissgauff ISE660
If you decide to choose an electric food waste grinder for a sink, the connection of which is carried out according to the principle described above, then you can prefer the above model. Buyers claim that this device has an average cost of $ 219. All other characteristics are successfully combined with an affordable price. The volume of the crushing chamber is 0.6 liters, but the diameter of the device is 121 mm. Consumers choose this model also for the reason that it provides the possibility of continuous loading of garbage.