Motoblock - an indispensable assistant for the owner of private suburban housing. The presence of such equipment facilitates the cleaning of a personal plot, the cultivation of land in the country and in front of the house. However, with the onset of cold weather it is not at all necessary to send the hand tractor for storage. Instead, you can install a snow blower on a walk-behind tractor, which will allow you to clean snow and ice from your homestead.
Principle of operation
A snow blower on a walk-behind tractor is connected to a power take-off shaft. When moving around the site, the auger installed in the bucket of the device breaks the snow into small parts. Further, the crushed mass is thrown to the side under the influence of the air flow generated by a powerful fan. The distance over which snow is ejected depends on the degree of compaction and humidity.
By purchasing the most functional snow blower on a walk-behind tractor, the user, as a rule, gets the opportunity to adjust the angle and range of snow scatter during site cleaning. At the same time, there are fairly simple designs in the form of brushes and ordinary buckets, which we will talk about in more detail below.
Spade blade
It is the simplest snow blower on a walk-behind tractor made in the form of a bucket. Such devices are beneficial not only during the winter period. They can be used successfully for leveling soil and gravel, garbage collection, scorched leaves.
The blade width here varies from 80 to 150 cm. Therefore, the user has the opportunity to choose exactly the design, the dimensions of which correspond to the type and power of the existing walk-behind tractor. Ladles with a width of not more than a meter are designed for the lightest manual tractors. Truly powerful motoblocks can be equipped with heavyweight structures of maximum width.
The edges of the blade shovel contain a rubber coating that protects the surface from damage during snow removal. Such snow blowers allow you to adjust the angle of rotation and tilt of the bucket. As a result, the user gets the opportunity to put the blade in the optimal position when performing certain tasks on a personal or summer cottage.
Snow blower with brush
Manufacturers of accessories for motoblocks offer several options for attachments for snow removal. One of the easiest to use and effective solutions is a device with a rotating brush. Such devices are indispensable when cleaning surfaces that contain an expensive decorative coating.
A snow blower with a brush is attached to the rotating shaft of the walk-behind tractor. In one pass, a technician equipped with such a device is able to cleanly remove a track more than one meter wide.
When operating a snow blower with a brush, it is possible to adjust the grip of the snow cap in several directions, due to the shift of the structure forward, to the right or left. Subject to adjustment and the height of the stripping.
Rotary snow blower
If you can cope with cleaning small volumes of snow by using attachments in the form of a bucket or brush, then only a rotary snow blower for a walk-behind tractor can clear really high notes. Such mechanisms have the highest performance compared to all of the above options. On average, a rotary mounted snow blower for a walk-behind tractor picks up snow to a depth of about 25-50 cm.
The main structural element of such a nozzle is a screw that contains paddle wheels. The rotating device captures the snow cap, which moves up, passes through the bell and is thrown out of the cleared area.
Snow blower for Salute motoblock
The attachment to the motor-block of the indicated brand is intended for clearing snow from flat areas at an ambient temperature of 5 to -20 ° C. The device is available in several separate modifications, which differ according to the method of attachment to a hand tractor.
The snow blower is a precast welded construction. The main functional element is a screw auger. During its rotation, the snow mass moves from the edges to the center. Movable blades of the device provide advancement of snow to the nozzle. The direction of ejection is regulated by a rotary screen. On both sides of the casing support plates are used to adjust the height of snow removal.
Snow Blower Features:
- length - 60 cm;
- height - 82 cm;
- width - 64 cm;
- capture - 50 cm;
- the possibility of cleaning the snow cap up to 17 cm thick;
- screw speed up to 2100 rotations per minute;
- snow blower mass - 60 kg.
Snow blower on the Neva motor-block
The attachment for a manual tractor of this brand is presented in the form of a welded body, in the middle of which a screw rotating mechanism is placed. It also contains a coupling device, drive elements that provide connection to the motor-block shaft.
What characteristics does the Neva snow blower have? A walk-behind tractor equipped with such attachments makes it possible to capture snow mass of 60 cm wide and about 50 cm high. As a result, it becomes possible to efficiently use the device not only when it is necessary to clean a personal plot, but also to clean up any noticeable impressive production areas.
The snow blower for the Neva motor-block needs careful leaving and timely service. To extend the life of the device, before each start of work, it is necessary to check the reliability of the fasteners, the quality of the belt and bolt connections. Tightening fasteners is required after every 5-6 hours of continuous operation.
DIY snow blower for walk-behind tractor
To assemble a homemade snow blower to a walk-behind tractor, it’s enough to get a powerful enough engine that can be removed from an old hand tractor. As the basis for the manufacture of the screw of the future fixture, roofing sheet metal is suitable. The sides of the bucket can be made of plywood 10 mm thick.
To weld the frame design of a homemade snow blower, it is enough to take a metal corner. A pen here is a half-inch diameter pipe. A screw shaft can be made from a -inch pipe, in the middle of which a cut can be created for fixing metal blades designed to eject snow.
To prepare the auger from the roofing material, using a jigsaw you need to cut the conveyor belt in the form of four rings. The diameter of each of them should be about 30 cm.
The engine is mounted on a platform that connects to the snow blower bucket with welded corners. A belt connection can serve as a transmission, which will transmit torque to the screw shaft.
The design is most convenient to put on skis, since the wheels will often get stuck in snowy notes. This, in turn, will create a whole host of inconveniences during the operation of a homemade snow blower.
For the manufacture of a rotary trough through which snow mass will be discharged, it is enough to take a plastic sewer pipe of an impressive diameter. The latter is fixed on the auger housing. In the end, it remains only to give the snow blower a presentable appearance by treating the surface with paint.
Eventually
As you can see, with the help of a snow blower it is quite simple to mechanize manual labor. Today on the market there is a wide variety of attachments for walk-behind tractors. However, if desired, a fairly practical device can be made with your own hands. To assemble the unit will require only some costs for the purchase of materials, as well as the allocation of several days to complete the work.