It is very difficult to imagine a modern apartment without an automatic washing machine. This household invention has become a reliable assistant to housewives who can simply load dirty laundry, set the required washing mode, turn on the unit and do other household chores. The assistant will do all the work independently in automatic mode.
But any household appliances are not immune from the appearance of various malfunctions, which can bring users a lot of concern. Therefore, if you find that the washing machine is constantly collecting water, you need to establish the cause of a possible breakdown, and decide how to fix it. Delaying a solution to this problem can lead to more serious troubles.
Possible consequences of a malfunction
During operation, the machine can draw water at least two times, since any mode involves the washing process itself, as well as rinsing the laundry. Of course, depending on the selected operating mode, the number of cycles for recruiting and draining water may increase, which is a normal process. Concern should arise when the washing machine draws water continuously, which is one of the most unpleasant and dangerous breakdowns.
In the event that the drainage system is functioning correctly, the unit will remove water from the tank. But with a clogged discharge, electronic control may fail or flooding neighboring residents. In addition to economic losses (increased water consumption), this situation leads to a large load on the main components and parts of the machine, which is the reason for their premature wear. Especially if the Indesit washing machine constantly draws water, the heating element suffers, which is connected very often.
In any case, the operation of a washing machine with uncontrolled filling with water is prohibited, as this may cause damage to the other components of the unit.
Reasons for uncontrolled water intake
It’s not difficult to notice that the Ariston washing machine is constantly collecting water. After dialing, water is constantly drained into the sewer, which is accompanied by the incessant noise of the liquid being removed, and also greatly lengthens the washing process.
The most common reasons why a washing machine is constantly collecting water are:
- Incorrect connection of the washing machine during installation.
- Damage to the filler (intake) or exhaust valve.
- Malfunction of the liquid level sensor ( pressure switch).
- Failure in the electronic control system.
Incorrect sewage connection
Particular attention should be paid to the correct connection of the washing machine during the first installation or after moving the machine to another place.
A reasonable question arises: the washing machine is constantly collecting water, what should I do? It is believed that the device is connected correctly if you connect the drain hose to the sewer through a siphon. The working end of the device should be located above the drum of the machine, i.e. at a height of about 60 cm from the floor surface. This arrangement completely eliminates spontaneous leakage of water from the tank. Otherwise, the Samsung washing machine draws water constantly, as the level sensor is triggered when the water level drops and sends a signal to the pump to pump liquid. At the same time, the washing cycle increases in time and the quality of work suffers.
Unit Installation Check
After installing the unit, it is recommended to check the correct installation. The visual method is applicable in rooms where there is the possibility of free access to the elements of the drain system.
If it is not possible to control the level of the drain hose, due to natural obstacles, it is possible to verify the correct installation using an experimental method. To do this, set the normal washing mode and wait for the tank to fill with water. Next, turn on the drain and after 5-7 seconds we set a pause.
For some time, you need to monitor the liquid level in the tank. If the water level remains at the previous level, then the machine is connected correctly. A characteristic murmur of water in the pipes will notify you of the incorrect connection.
Sewage blockage
Also, the washing machine draws water constantly if there is a clogging of the general sewage system. Such a siphon effect occurs as a result of the appearance of rarefied pressure when using sewage by neighbors in the riser. It is this pressure that is sufficient for periodic pumping of liquid from the tank of the washing unit.
Installing a special low-power valve (anti-siphon) on the drain hose allows you to get rid of this harmful circumstance.
A temporary precautionary measure is to disconnect the drain from the siphon, and install it in the bath or sink when washing.
Level sensor malfunction
If earlier the unit worked fine, and then the LG washing machine began to constantly draw water, then there was a breakdown of the part. In the design of an automatic machine, a level sensor (pressure switch) is responsible for the water level in the unit tank. When the tank is filled to a certain point, the sensor gives a signal, and the flow of water stops.
But over time, like any electromechanical device, the sensor can fail. Causes of malfunction of the pressure switch:
- oxidation of connecting contacts occurs due to work in a humid environment;
- possible contact closure;
- damage or clogging of the pressure pipe;
- membrane depressurization occurred.
Malfunctioning of the sensor leads to overfilling of the tank, and also creates a risk of fluid leakage.
Pressostat replacement
There is a level sensor on the tank at the rear of the machine. Therefore, to get to it, you have to remove the cover of the unit. Next, the state of the sensor contacts is visually assessed, and if there are signs of oxidation, mechanical cleaning is performed.
Self-replacement of the level sensor is carried out according to the following scheme:
- First, the hose going to the compression chamber is disconnected.
- Then, having unscrewed the two self-tapping screws, remove the pressure switch from the housing, after having previously disconnected the device terminals.
- We install a new sensor, twisting it with screws.
- We connect the power terminals of the device.
- We connect a compression hose.
- We close the case with a protective cover.
Before closing the cover of the unit, you can make a test run, on the basis of which the issue of the system is working.
Valve malfunctions
If the Ardo washing machine is constantly collecting water, it is necessary to check the operation of the filling and drain valves. Their failure is most often associated with damage to the electromagnetic shutter, which is triggered by a signal from the control system. When voltage is applied to the coil of the device, the magnetic rod is retracted, which acts on the membrane, thereby opening the valve opening. Then, after reaching a certain level of water in the tank, the power is turned off, and the spring returns the membrane to the closed state.
The main causes of valve failure are:
- loss of membrane elasticity;
- failure of the coil winding;
- spring loosening.
Therefore, if the spring is weakened or the membrane is broken, the washing machine draws water continuously.
You can check the serviceability of the valve by connecting an external power source to it. If you hear a click, it means the valve is working properly. Otherwise, the coil winding burned out.
To eliminate such a malfunction, the valve will have to be replaced, since its device does not involve any repair work. You can access the part by removing the top cover of the unit. The dismantling process itself is not difficult, just unscrew the screws or remove the special latches, after disconnecting the power terminals. Install the valve in the reverse order.
Incorrect operation of the control unit
The washing machine can constantly draw water when the control system fails, which is responsible for the proper functioning of all the components of the unit. In this case, the signals from the control board are given in the wrong order, which can cause spontaneous filling of the tank with water.
With such a breakdown, an error code is displayed on the control unit display, which allows you to navigate in the cause of the malfunction. You can completely restart the control system by turning the unit off and on. If, even after such manipulations, the washing machine still constantly draws water, it is recommended to contact the specialists of the repair center. A malfunction of the control unit is a very big problem, since most often you have to completely change the control board.
Some tips for proper operation
The trouble-free operation of any household device is possible only if the basic rules for its operation are observed. Therefore, experts recommend not to neglect simple tips:
- connect the machine with the help of specialists, according to the manufacturer's instructions;
- observe proper loading of linen;
- add detergent according to loading rate;
- It is recommended to periodically clean the connection hoses and the unit filter.
Despite the fact that the washing machine operates in automatic mode, it is not recommended to leave it unattended. The presence of timers and a protection system cannot guarantee the health of the home assistant during a power surge.