With the advent of the cold season, each owner of his own home thinks about how to warm up in severe frosts, as well as how to make living more comfortable. Modern industry develops and creates many different devices and devices for this, and models are constantly being updated. Not so long ago, inverter heaters appeared on store shelves of related products.
Popularity
Such heaters quickly gained popularity and wide distribution, as significant efficiency and profitability are important for modern customers. Technology companies are increasingly introducing new systems that can meet the above requirements. Thus, inverter heaters were designed and implemented. They differ from each other by the principle of action, however, they have common positive characteristics.
general description
This kind of device has a built-in inverter that converts alternating current into direct current, while changing the voltage and frequency. In physics, this process is called inversion. The described devices are periodic voltage generators. They are close in form to a discrete signal or a sinusoid. This process significantly affects the power of the unit. Due to this, electrical devices exhibit noiselessness and efficiency during operation.
Main advantages
Inverter heaters have many advantages, among them they distinguish a special mode of operation. Due to the fact that the system has an inverter, after reaching a certain temperature, the mechanism does not turn off, but continues to operate at less impressive speeds. At the same time, a favorable microclimate is maintained in the room. The device does not expend energy on the processes of switching off and on. Inverter heaters, reviews of which you can read in the article, should be purchased only after a thorough study of the quality characteristics of the equipment.
When using an inverter, there is no concept of high current during start-up. At startup, the current is not higher than the nominal, which favorably affects the life of the device. Inverter heaters due to the above qualities do not need to be constantly turned off and on. These cycles reduce the operating time of the device. Energy savings range from 30 to 50% when compared with conventional appliances.
Performance and usability reviews
The inverter wall heater is practical and has a high efficiency. The unit is able to heat at low temperatures, demonstrating high performance. The device shows the ratio of heat generated during operation to energy expended. This indicator is 4. This fact indicates that when spending 250 watts there will be an opportunity to get more kilowatts of heat. According to consumers, this is a very good indicator.
Safety and Low Noise Reviews
The inverter wall heater is environmentally friendly to use and safe. A modern consumer emphasizes that in operation such units have a low noise level due to the fact that the compressor rotation speed is reduced during operation, because the load is incomplete. This has a positive effect on the people who are in the room.
Negative point
Economical inverter-type heaters are very impressive today. Consumers note, however, that this device has a high cost. Sometimes this forces buyers to make their choice in favor of other equipment. However, it is worth considering that the unit is able to justify itself in a fairly short time.
Features of inverter heater
Currently, a huge number of heaters are on the market. Among the most common, one can distinguish an invertor variety that runs on liquefied and natural gas. These units are used to maintain the most comfortable temperature in open areas and in country cottages. The device is characterized by an impressive heat supply, which is accompanied by low fuel costs when heating large areas. Economical inverter heaters are mobile devices that are easy to use and even those who do not have professional skills can handle them.
Quite often, the consumer uses infrared inverter heaters. They are used for heating residential and utility rooms. These devices are characterized by resistance to moisture and precipitation, therefore, such units are convenient to use for heating cottages and verandas. Recently, devices of this type have found their application in the construction of heating systems that operate on electricity. You can read a lot of positive reviews about them. Such equipment can operate in places where there is access to electricity.
When using inverter heating, the owners will not need to draw up documents, as well as take permission to install a heating system. The most pleasant factor for the consumer is that the cost of equipment is lower compared to other heating systems. If you decide to purchase a gas inverter heater, then it can form the basis of heating, and with this equipment you can replace the gas boiler. The operation of the system using such a device will consist in the fact that the electric energy entering the boiler will pass through the heater. The inverter boiler will then generate an induction current. If a situation arises when the power is turned off, the boiler can continue to operate on battery power. The heater has two parts, namely a heat exchanger and a magnetic element.
Comparison of inverter heater with conventional
If we consider the air conditioner, which is equipped with an inverter, so that it is deprived, it can be noted that the operation of the first is based on the principle of operation of the heat pump. It consists of two blocks, one of which is internal, and the second is external. In the first block there is a heat exchanger in which freon condenses under the influence of impressive pressure. In this case, the temperature reaches a mark of +80 degrees. Freon in a liquid state is transported to the second unit, where the pressure is at a lower mark. As a result of the difference in pressure, freon migrates to the gaseous state from the liquid. Thus, the inverter electric heater works according to a simple principle. It is highly ecological for the reason that its functioning is not accompanied by the process of burning any fuel, as well as the release of harmful substances into the environment.
If we compare a similar model with a conventional one, which is devoid of an inverter, then we can see a number of differences. If you choose the right product, then it will be able to maintain the indoor temperature in the range from +20 to -22 degrees. At the same time, the temperature from +30 to -35 degrees can remain on the street. If the weather outside is not too hot, then the power of the equipment will not be possible to change, since the compressor is characterized by the installed capacity.
To accurately maintain the temperature of the unit, it is necessary that the cooling power change. This issue is solved quite simply. At the moment when the product starts, the temperature control sensor monitors the air temperature in the room. When the temperature changes to the mark of 2 in the direction of decrease, the compressor will shut off in automatic mode. At the same time, the fan located in the indoor unit will continue to function, for this reason, turning off the compressor will not turn out to be too noticeable, only a temperature increase can catch the eye.
When the mark is raised 2 degrees higher than the set value, the compressor turns on again, after which the entire cycle will be repeated many times. A significant disadvantage of this technology is the large temperature fluctuations inside the room. This is because for precise control there is a need to turn the compressor on and off. This can cause breakdowns or difficulties during operation.
Additional positive features
If you decide to choose an inverter heater with a temperature controller, you can get equipment that saves an impressive amount of electricity. Due to the special technical characteristics, the wires of the power network almost do not heat up. It is impossible not to note the absence of reactive components of the current, which is accompanied by minimization of power factor losses. The unit is equipped with heating elements that passively relate to oxygen.
Negative features
Inverter heaters for the home have some disadvantages. Among them, one can single out the presence of complex electrical circuits that are located in the indoor unit. This increases the sensitivity of the unit to the differences that occur in the network. The device has electronic mechanisms that exclude the possibility of turning on the compressor at a temperature of -11 degrees or lower. If the ambient temperature has risen above +42 degrees, then the compressor also cannot be turned on. The devices have non-standard spare parts, which is why, if repair is necessary, some difficulties may arise, for example, a long period of work.
Cost
Inverter heaters, the price of which varies between 10-20 thousand rubles, justify their value in the first months of operation. In support of this conviction are consumer reviews, which must certainly affect your decision. Among the most popular brands are Ballu, Frico and Elara.