Today, there are many technologies that can protect the home from all sorts of troubles. One of them is the Aquastop system. Protection against water leaks is carried out by means of automation. Such a device is able to preserve the repair of both the owners of the apartment and their neighbors who live from below. The device includes several elements, the installation of which can be done independently. Today, several systems of this type are presented to the consumer. User reviews will help you choose the best one. Protecting your home from the flood is simple enough. The use of "Aquastop" can save significant family budget funds.
general characteristics
Many manufacturers of household appliances related to plumbing equip their products with integrated leakage protection. However, this applies only to the top models, and they will not be able to help with the flood due to a breakdown, for example, of a mixer.
To protect yourself from troubles, it is necessary to provide protection globally, and not only from the side of a possible breakdown of the washing machine. It will be more correct to block the riser of the water supply to the apartment. This is the meaning of the Aquastop smart system. It is protected against water leaks throughout the apartment. Due to its well-coordinated work, the elements included in its structure block the flow on the common highway for its supply to the apartment. This ensures absolute prevention of damage to property from the water supply.
Equipment
There are 3 main elements that are part of the Aquastop system. Protection against water leaks (photo below) is carried out using ball electric valves, a controller and humidity sensors. If water gets on the floor, it is detected by the sensor.
Sensors can be located in the kitchen, in the bathroom. They can be tied to one controller. This is the "brain" of the whole system. It processes the signal received from the sensors and, if necessary, shuts off electric ball valves. The latter are mounted in cold and hot water pipes. Sensors can be wired or wireless. Their number in the kit varies depending on the type of system. Whatever the equipment in this device, you can mount it yourself.
Ball Valve Installation
There is a certain technology that allows you to install the Aquastop system. Protection against water leaks, the installation of which is done on its own, will require a study of the sequence of actions. Electric ball valves must be cut into pipes behind manual inlet valves. In no case should they be mounted before or instead of valves.
Before installation, the water supply is shut off. Next, the wiring is disconnected from the inlet valve. Then the system taps are installed. If the thread of the ball valve is external, it is simply wound onto communications. When it is internal, you have to use the "American". The thread is wrapped with a sealant (fum tape, tow). The system tap is screwed to the valve in a certain direction. It is indicated by an arrow. Pipes are connected.
Controller
The control device has the basic requirement during the installation of the Aquastop system - protection against water leaks. What kind of device it is is easy to understand by its appearance. Photo provided below.
This is digital equipment. Therefore, it does not like high humidity. The durability of the installation will ensure its installation in a dry, splash-proof place. Humidity should not exceed 70%. Having chosen a suitable place, it is necessary to screw the plate to the wall with screws. She is included. When this work is completed, you must install the controller. It is mounted on a screwed plate.
Sensors
After carrying out the above manipulations, the next stage of installing the Aquastop device begins. Installation of a system for protection against water leaks now involves the installation of sensors.
With their wireless options, everything is simple. Such sensors are installed in places of potential leakage. But here you have to tinker with wired varieties. Wires can be left open or hidden behind the baseboard, between the seams of ceramic tiles. The sensor is usually fastened with tape or screw to the floor. It is closed with a decorative cap.
Connection
When all elements of the system are located in their places, they must be connected to each other. The corresponding controller connectors (marked with inscriptions) are connected to the control device in the necessary terminals. Wireless devices are already registered in the controller memory. They do not have to be connected.
The battery pack must be connected to the board. For this, there is a special connector on it. The unit is connected to the main part of the controller. To do this, the wires are pulled through a special hole. If the system is wireless, you must connect the battery pack to the radio base. Then they are attached to the controller. All work takes from 1 to 4 hours. Following the instructions, it will be quite simple.
Expert Reviews
Professional plumbers have long been familiar with the Aquastop system. Protection against water leaks "Neptune", "Aquastorozh", "Hydrolock" in this case are, in their opinion, the most popular. Each of them has its own characteristics.
The Neptune system, for example, has a response speed of 5-7 seconds. To resume work, you need to press the button on the controller. "Hydrolock" has the function of self-cleaning cranes. This significantly increases the life of the system. The materials from which it is made are very high quality.
A special feature of Aquastorozh’s protection is a special energy storage device. Therefore, it can work without connecting to a network. Each of the presented devices has its own varieties of configuration. Therefore, experts recommend choosing them in accordance with the conditions of the premises.
User reviews
There are many opinions among users of the system about the operation of the Aquastop device. Protection against water leaks, reviews of which are presented in various sources, indicate the effectiveness of the system. Some consumers argue that using this approach in everyday life is not very convenient. During bathing, in case of accidental ingress of water on the sensor, its flow may suddenly stop. But this will not happen if you close the curtain. The sensor is protected from minor drops by a decorative cap. More durable, according to user reviews, is the Hydrolock protection system. It is also noted that wireless sensors are much more convenient in everyday life. The ability to work without a stationary power source is pleasant to many users of the Aquastorozh system.
Having become acquainted with the flood prevention system, we can conclude that it is quite durable and effective. You can mount Aquastop yourself. Protection against water leaks will protect the home from unpleasant situations, save the repair of the apartment owners and their neighbors. Various configuration options and the principles of the system will allow you to choose the best option. This is one of the most reliable types of installations to prevent the flow of water into the home.