How to cover the roof of the house inexpensively and efficiently?

Any construction involves large investments, and when it comes to the roof, there is not much money left in the wallet. That is why many property owners are looking for a budget, but high-quality version of the covering material for the roof. A huge number of such coatings are presented on the market, there is plenty to choose from, but each material has certain characteristics, its own indicators of durability and reliability. Some proposals are characterized by higher waterproofing properties, while others benefit from the fire safety issue.

Choosing the cheapest material for the roof: wave slate

how to cover the roof of the house cheaply

If you are faced with the question of how to cover the roof of a house inexpensively, then you should consider several options at once, the features of which will allow you to understand which one to lean towards. For example, wave slate is familiar to everyone since childhood. This material has an attractive cost, but slate sheets sometimes do not pass the hail test, so their choice should be approached more carefully. It is important to pay attention to whether the material has a protective layer in the form of oil paint or enamel. Such a coating can increase the frost resistance of the material and reduce the ability to absorb moisture.

Slate Benefits

how you can cover the roof of the house cheaply

When deciding on how to inexpensively cover the roof of a private house, you can consider the above material, which has a successful combination of asbestos fibers and cement. As a result of production, it is possible to obtain extremely hard material. An adult can move on the surface of the equipped roof without fear that the material will be damaged. In sunny weather, asbestos-cement sheets warm up less if they are compared with metal sheets .

Over time, the material does not rust, during operation it does not conduct electricity, like materials made of metals. If you still have not decided how to cover the roof of the house inexpensively and reliably, then you should take a closer look at the wave slate, which, after completion of the installation, will not require a minimum replacement within 25 years. However, if individual sections or one of the sheets are damaged, then one canvas can be replaced without touching the entire coating. Slate is not combustible; it does not emit toxic fumes in a fire. With proper use, asbestos-cement sheets exhibit durability.

Why do some consumers opt out of slate

what material is better to cover the roof of the house inexpensively

Scientists claim that asbestos has carcinogenic properties, therefore, recently chrysolite-cement sheets are increasingly found. During transportation, the slate, despite its hardness, can become cracked, some of its parts even crack off. This also applies to the processing process. It weighs 1 sheet of such a roof covering of about 20 kg and more, so it is quite difficult to lift it to the roof.

Although the slate itself does not burn during exposure to fire, it cracks with a distinctive sound. In this case, sparks are formed that may well cause a fire to nearby buildings. If you also had a question about how to cover the roof of a house inexpensively and efficiently, then, perhaps, wave slate will not suit you for the reason that the sheets are able to absorb melt and rain water, as well as water vapor, as a result of this canvas covered with cracks and moss.

Is it worth using roofing material

how you can cover the roof of the house

If you, too, are among those who are wondering about how to cover the roof of a house inexpensively, then you should also consider the features of roofing material. With it, you can cover the roof of the barn, a temporary building and a fireman. The main task of the material is waterproofing. It is not only cheap, but also ahead of some opponents in matters of reliability and durability.

However, it is necessary to lay the roofing material in several layers. One of the main disadvantages is low fire safety. The material is flammable, which is a minus. In order to get rid of some of the disadvantages of the coating, when installing it, bitumen mastic should be used. However, this will entail additional costs. For farm buildings, ruberoid is perhaps the most optimal option.

Features of Ondulin

Than inexpensive to cover the roof of a private house

If you, too, were among those who faced the question of how to cover the roof of a house inexpensively, then among other options you should consider ondulin. It allows you to carry out the work quite cheaply. And for temporary buildings, this option is optimal. If you built a cottage, then it is not so prestigious to finish its roof with an ondulin.

This material is made from waste paper, therefore, under heavy rain, the coating can be deformed. In addition, there are some difficulties in its maintenance. To clean the roof without leaving dents is almost impossible. It is especially not recommended to press on wet ondulin.

This material is quickly discolored, and no claims can be made to the supplier. This is also due to the fact that the manufacturer gives a ten-year guarantee for moisture resistance. The material does not let water pass, but over time, it can no longer boast of a beautiful appearance. But this material, like any other, has its advantages. Among them, environmental safety and hygiene are especially noteworthy. Manufacturers even claim that rainwater from the ondulin roof can be used for drinking.

In addition, this coating is not afraid of exposure to acids and alkalis. Oil-based products will also not be able to spoil the material, as well as industrial gases. Manufacturers claim that the surface of ondulin is able to fight pests.

Another advantage of this coating is its low weight. A standard two meter long canvas weighs only 6.5 kg. This is 4 times less compared to slate. Transporting ondulin will be simple, and raising it to the roof is even easier. You can perform such work even alone, without waiting for the help of a partner.

If you thought about the question of how to cover the roof of a house inexpensively, then ondulin should be considered, because it is also just amenable to cutting. Use for this you need a hacksaw on wood. By bending the material, you can give it any shape, which allows you to cover the roofs of bizarre structures. Among the advantages of ondulin is also noiselessness. If you use a metal coating, then you can’t do without a sound insulation layer, which entails additional costs. But ondulin will not emit annoying loud knocks when it rains and will not respond to the stomping of birds.

The use of tiles

how to cover the roof of the house cheap reviews

The tile is presented today in different forms. Each of them has a certain value. If you are aiming to cover the roof with cheap material, then you should prefer soft tiles. This material is not afraid of corrosion, it is not subject to rust and rot. Water does not penetrate under the layer. The material is not afraid of ultraviolet radiation and does not fade with time. The disadvantages can be eliminated by replacing individual fragments.

Reviews on why you should choose soft tiles

how to cover the roof of the house inexpensively and efficiently

If you decide on how to cover the roof of the house inexpensively, it is recommended that you read the reviews first. Consumers argue that one of the main advantages of soft tiles is the ability to use this material for facing roofs of complex configuration. The roof can look like a bulb or even a huge church dome.

Having visited the store of building materials, you can find this material in many geometric shapes, among them:

  • rectangle;
  • rhombus;
  • hexagon.

However, this list cannot be called complete. Consumers, in their words, also like the extensive color scheme. Laying shingles is quite simple, because they have plasticity and allow you to implement design ideas. Using this material, according to home masters, you can restore almost any old roof, and the service life reaches 60 years. With proper installation, this is not the limit.

Additional advantages

When wondering what it is possible to cover the roof of the house inexpensively, you should definitely pay attention to the soft tiles, because its installation is quite simple. To carry out the work, it will only be necessary to glue the shingles to the crate and additionally nail them. If you have even the slightest skills in carrying out such work, you can easily cope with the roof finish in a short time.

Consumers believe that the material is also good because when it is laid, it is possible to achieve almost waste-free production. The coating is very resistant to vegetation, it does not need to be painted, it is light in weight and allows you to replace individual shingles quickly and easily.

Conclusion

Each year, many consumers wonder what material is best to cover the roof of the house inexpensively. Among other solutions on the market are professional sheets, metal tiles, asbestos-cement slate, galvanized steel and roofing material. An alternative is euro slate.

In addition to these materials, you can use wooden planks, aluminum or copper sheets, and even plant material in the form of reeds and straw. But the latest varieties of materials are used quite rarely, because they are difficult to lay, and they are ready to serve for a long time only if the master has certain skills in carrying out the work. When deciding on how to cover the roof of a house / cottage inexpensively, you may prefer roofing material, which today is one of the available materials.

Source: https://habr.com/ru/post/E15666/


All Articles