Progress cannot be stopped! With this statement, hardly anyone wants to argue: technology is being improved, the imagination of many designers is also not far behind. Due to this, even in the arrangement of the bathroom interesting ideas appear. And specifically we are talking about installation under the toilet. Previously, something similar could be found in public institutions (shopping centers, restaurants, airports and other institutions). This solution fits perfectly into the limited spaces of the rooms due to its compact size.
Now, ordinary consumers began to look closely at the new product, which is still fair, since such designs appeared on the domestic market not so long ago. Moreover, the number of people wishing to update the interior of bathrooms every time increases.
A luxury item or still a necessity?
What is meant by the term “installation” and is it really necessary for us all? In fact, this is an installation system that allows you to install one or a lot of plumbing items (sink, toilet, bidet, urinal). Moreover, in the bathroom you can choose almost any convenient place for installing the installation under the toilet. The material of the walls also does not matter, and all plumbing will be reliably hidden from view. With proper arrangement, the toilet itself will be in sight with a flush button located nearby. That is, the entire installation is hidden.
Moreover, in this case, the entire working space of a compact bathroom is optimally used. And this is characteristic of most high-rise residential buildings erected in Soviet times. Therefore, when planning to make repairs in the toilet, you should think about a good update.
If the aesthetic component of the design of such a room is especially important for various reasons, then such designs will be more than appropriate. And to finally be convinced of the need for such a solution, it is worth getting acquainted with the clear advantages.
Advantages of installation
The great popularity of different types of toilet installations is due to the fact that built-in appliances are increasingly being used in everyday life. And all due to the incredible ease of use and attractive appearance. Everything that looks bad is reliably hidden from view. And this applies not only to the kitchen, where basically it looks great, but also to the bathroom.
Listing the advantages of flush mounting in this room, first of all, it is worth highlighting such qualities:
- Compact design, due to which the entire space of the bathroom is rationally used.
- Since the flushing cistern is isolated, the entire system runs silently.
- There are no hard-to-reach spots, which means that every cleaning in the room will be easy and easy.
- The installed design allows you to adjust the flow of water.
- Aesthetic appearance, thanks to which the entire interior of the bathroom is transformed.
- Any possibility of damage to the flooring is excluded.
- You can perform installation under the toilet with tiles without loss of harmony in the interior design.
High-quality designs are able to withstand a load of about 400 kg. In addition, if we talk about compactness, minimalist style lovers will be delighted. But especially such a solution is relevant if the bathroom is a combined type. In this case, there is the opportunity for arranging a warm floor, since the bathroom requires that the floor covering be heated.
If repairs are necessary, access to communications can be obtained through special hatches. Perhaps there are many more advantages, but this is quite enough to become interested in such an innovation.
Installation flaws
Unfortunately, as always happens, all good things have a flip side of the coin. Some points may not appeal to some consumers. Installation of the structure is simple, but requires more investment than a simple installation of the toilet. In addition to buying plumbing and expensive installation of a toilet installation , you need to purchase the system itself. In addition, if necessary, replace equipment will require a complete repair. Self-installation allows you to slightly reduce costs, which compensates for some of the shortcomings.
At the same time, it is equally important to pay attention to the condition of pipelines, since old pipes may not withstand the load. If you ignore this moment, then you should prepare in advance for the upcoming unjustifiably inflated costs, which is unlikely to please anyone.
Classification of installations
Several manufacturers produce several varieties of installations. Usually these are two types:
- Blocky.
- Frame (there is a subspecies - angular).
Each type has its own characteristics, as well as advantages and disadvantages. To make the right choice, it is worth examining each variety in more detail. This will determine which particular installation is most suitable for each particular room.
Block constructions
The main feature of block products, which, in essence, are a box for installing the toilet, is the installation method - they need a supporting wall. This design involves the complete assembly of all systems (plumbing, sewer). All this is done in the factory. The presence of the load-bearing wall is due to the fact that the fastening is carried out by means of anchor bolts, which are supplied with the installation.
That is, externally, it all looks like a candy bar, which is fully assembled and ready to work after connecting. As a rule, the height of the structure is about 110 cm, not more, and it is completely mounted on the wall. If the bathroom has a niche, then this is the best installation option. If necessary, you can perform installation from the outside and with further laying.
If in the place where it is planned to install the toilet there is no load-bearing wall - installation of this kind is impossible.
Frame constructions
They are metal frames that are equipped with adjustable legs. It is very convenient for choosing the required installation height for the toilet.
At the same time, the frame itself is attached to the floor and the wall through four main points (two on each surface), but the main load is absorbed by the floor covering. However, there are models that are fully fixed to the wall. With this option, a supporting wall is also needed.
Frame systems usually have a standard width, which is 45-65 cm, and a depth of 16-35 cm. While the height can be different, which is associated with individual needs. The designs with a height of 130-150 cm are very popular. But a number of consumers prefer low installations - 85-90 cm.
Being a subspecies of the frame structure, corner installations are intended for installation exclusively in the corner of the bathroom, that is, at the junction of the walls. Moreover, it must be absolutely direct. This option is relevant for very small bathrooms.
The mount can be to the wall or floor. At the same time, there is wide scope for the manifestation of one's own creativity. However, mounting corner models requires larger investments.
What to consider?
To make the right choice of installation for the toilet, its dimensions must be taken into account first. This is especially important when it is planned to install plumbing in a certain place. And here it is important to pay attention to the dimensions of the toilet itself (as a rule, the depth is 10-15 cm, width - 50 cm, height - meter).
Depending on the installation location, each manufacturer is ready to offer one or another model to choose from:
- standard;
- island construction;
- bilateral option;
- linear solution.
Standard installations can be installed in any convenient place in a bathroom.
Island models are ideal for indoor bathrooms with severe height restrictions. The right decision would be to stop when choosing a frame structure with a height of not more than 83-84 cm. A model from the company Grohe, the height of which can be adjusted from 82 cm to 98 cm, can be a good option.
Bilateral installation under the toilet allows you to use both surfaces of the wall (usually a partition). This is true for a shared bathroom, when the toilet is attached on one side and the sink on the other.
Some models allow you to linearly arrange several units of plumbing. This can be several toilets or a combination with a sink or other equipment. The manufacturer Flaminia has a suitable option for this - Volo WS, the installation width is a little more than a meter (115 cm).
Popular models among many consumers
In order for the installation to work properly, you must select a reliable manufacturer. What does the rating of popular models look like among products in this category? The undoubted leaders in quality are Italian and German manufacturers. Accordingly, the cost of such products will be high.
Masters from Bulgaria or the Czech Republic can offer a good alternative that corresponds to a mid-market segment. Well, the cheapest products, as you might guess, are made in the Middle Kingdom.
If you analyze the majority of user reviews, products of a number of companies have good quality:
- Geberit
- Grohe.
- Wisa.
- Cersanit.
- Mepa.
Consider in more detail, if not all, then at least the first three.
Geberit
Installation under the toilet Geberit is one of the reliable implementations of sanitary equipment for the bathroom. The Swiss brand is very popular, and there are good reasons for this:
- Firstly, installation can be carried out regardless of any difficulties (too close pipe arrangement).
- Secondly, due to its high quality, the design can last up to 10 years.
- Thirdly, the installation itself is not as complicated as that of its counterparts.
- Fourth, the manufacturer sells spare parts.
Not without flaws. Fasteners not included. Well, the most important minus is the high price, which can be even higher due to a more original design and a number of additional options.
Among the many useful functions, it is worth noting the system for eliminating unpleasant odors. It will be especially useful if there are representatives in the family with a bad habit. Especially if there are still small children who, for example, do not benefit from tobacco smoke.
Grohe
Installation under the Grohe toilet from the company of the same name is notable for its equally high quality performance. Moreover, such a design is chosen not only by organizations, but also ordinary consumers.
The frame of the structure is made of metal and coated with a special layer, which gives the product corrosion resistance. Moreover, the welded joint is made on a professional level.
You can install the system in any accessible place, and there are no difficulties in terms of installation. The drain tank is equipped with a special mechanism that ensures quiet operation. As for guarantees, the installation, according to the manufacturer, will last 5 years.
But there are certain nuances: the toilet is not included in the package. In addition, due to its great popularity, fakes can be found on the market.
Wisa
The Wisa company was founded in 1903, and its main activity is related to the production of installation systems for various types of plumbing (toilet bowls, bidets, sinks, etc.). The rich experience gained over the years of hard work allowed us to secure a great future, and today it is not some small company, but a real brand with a world name!
Experienced engineers strive to improve their products and from time to time develop new models of toilet installations. The main highlight is the following:
- The optimal ratio of quality, technology and design solutions.
- Produced models are highly functional.
- There is no doubt in the reliability and durability of the equipment.
- The drain works silently, which is important.
It is also worth noting that the package, in addition to the tank, includes different elements (keys, buttons).