A vacuum cleaner is a technique that is in every home. Its main task is to clean the territory. But in the process, it can poorly absorb dust. Do not ignore this, because the reasons are very diverse. Of course, the first is cleaning the filter, but this will not always help. Therefore, there is no need to panic. It is worth making the main action.
The reasons can be very different. Some are simple, and anyone who can hold a screwdriver in their hands can solve them. And if it's an engine, then the cost of replacing it will hit your wallet. Do not forget that the vacuum cleaner may have a warranty period. In this situation, any internal autopsy will lead to the fact that the service center will not undertake warranty repairs. Before you understand this issue, it is worth visually evaluating your vacuum cleaner.
What's up with the bag?
The very first is bag control. If its filling is more than a third, then the thrust disappears or decreases. A one-time bag is thrown out, and the fabric is thoroughly shaken. Sometimes you can wash it, but then dry it well. There is a modern technology with a fill indicator. Thanks to him, you do not need to keep records - everything is visible immediately.
But the most convenient is the plastic glasses. They have a filter in them. They pull it out and clean it.
It also happens that all the above manipulations do not help. It is worth paying attention to the power regulator, since it can accidentally move. It is enough just to put it back in place or adjust it, and the process will be normal again. Sometimes, collecting any fluid in the aggregate can break the cravings. In this case, you need to dry your vacuum cleaner.
Pay attention to filters
If the vacuum cleaner does not absorb well, looking for a malfunction, it is worth analyzing everything. To do this, pay attention to two main filters:
- Fine cleaning. Its location in front of the motor. It is easy to rinse, but then dry thoroughly. If this does not work, you should buy a new one. Today, stores have many components, so there should be no problem. Although there are Chinese models that can’t replace anything.
- Outlet filter element. It is easy to detect from the back of the unit itself. It is usually fixed by a plastic grill. The exhaust filter is changed after 60 house cleaning procedures. This is done in advance so that the traction does not disappear at the wrong time.
When all this is completed and you cannot use the unit fully, you need to pay attention to other points. The main thing is not to ignore any deviations from the work process. There are many such situations when vacuum cleaners get into a terrible state for repairs. This is due to skipping filter replacement in it or other elementary procedures.
What else do you need to view?
The vacuum cleaner does not suck well, what's next? If all of the above is not appropriate, pay attention to the hose and brush. There are two reasons with the first elements - it is not completely inserted into the socket of the vacuum cleaner itself, and the second is the presence of holes. The thrust is lost, since the hose is usually corrugated, and it is not always immediately possible to notice a gap on it. Therefore, it is worth inspecting the entire unit.
Now for the brush. The vacuum cleaner does not suck well if debris is collected on the brush or inside. Usually it is hair or hair from pets. It is necessary to clean and check the operation. Everything can change. If the design of the brush is a roller, then it sometimes wears out, and its work creates problems. When the bearings break, the air also goes bad. Masters believe that when the nozzle is not full, the traction will not be maximum. Therefore, do not save on buying. It is Chinese models that can sin this.
About hose
If the vacuum cleaner does not suck well, what should I do? Pay attention to the internal condition of the hose. Sometimes it becomes clogged, and it is definitely impossible to complete the cleaning completely, since the traction substantially disappears. To understand this reason, you need to remove the brush and put your hand to the pipe. If the hose is not buzzing as usual, then clean it. But you need to carry out the process carefully so as not to pierce. Soft wire helps a lot. It is dragged along its entire length.
If these manipulations were not successful, the reason is in the motor itself. In such a situation, repair of the vacuum cleaner may be required. But you need to understand the essence of the process so as not to make the wrong decisions.
What happens to the engine?
So, the vacuum cleaner does not pull. How to act? How to understand that the motor is not working properly? This is easier to do when it works. It is necessary to turn off and put a palm to its location. If it is too hot, then the problem is already more serious. But it also happens that the unit simply shuts off, this is also due to the engine. If the vacuum cleaner does not absorb dust well, what should I do? Will have to do the repair.
The motor is the center of the whole device. When it breaks, it will be difficult to restore the unit. So this should not be allowed. In the event of a breakdown, you need to go to a service center or do some manipulations yourself. You need to remove the decorative case and look inside for burnouts or something like that. In addition, there are special devices that help to ring the motor and accurately identify if it is the reason.
If the motor itself fails, you will have to purchase a new one, although it is sometimes easier to buy a vacuum cleaner itself, so you have to make a decision. But there may be other breakdowns:
- Burned winding.
- Contact has fallen.
- The wire just broke.
This is fixable and almost everyone will be able to perform recovery actions. If there is a soldering iron, then it will help. Another problem is that the engine brushes have broken. But you should know how to fix it. Because if installed incorrectly, the operation will be in the opposite direction. The motor will not suck in, but blow out, and you will have to disassemble everything again.
Conclusion
These are the most basic and basic reasons. Of course, each unit may have its own reasons why the vacuum cleaner does not absorb debris and dust well. You don’t always have to go to the master immediately. Many change bearings, brushes and clean pipes themselves. So in any situation, the problem is solved. It is important not to miss the moment and do not use a vacuum cleaner if it has problems.