If you have decided to use Bikrost HPP for work, what it is, you should definitely find out. Bikrost KhPP is a bitumen-based roll roofing material designed for waterproofing works, it has a reinforcing base in the form of fiberglass, as well as a bitumen binder, which is applied on both sides. This binder contains special technological additives that are designed to improve the performance of the materials, as well as extend their life. On all sides, bicrost HPP has a protective coating, which is a melting film based on polymers.
If you are interested in Bikrost HPP, what it is, you should definitely find out before purchasing. Use this material in all climatic zones. It is produced within the walls of the Technonikol Corporation plant.
Material Features
At the heart of bicrost HPP contains fiberglass, which is a material that does not rot. Among other things, fiberglass does not break and has a negligible cost, if compared with other analogues. Bikrost HPP is of high quality, and it is based on a large amount of bitumen, as well as an increased volume of binder, which is located on the weld side. Increasingly, home masters are wondering why Bikrost HPP is used, what it is, it is also important to find out. The special manufacturing technology and composition of the material provide it with excellent performance characteristics, this allows the use of this waterproofing even in difficult climatic conditions. TechnoNIKOL uses the most technologically advanced equipment and the latest trends in the manufacture of bi -rost, which makes it possible to obtain excellent material that has an excellent price-quality ratio if compared with competitors.
The life of the material
Bikrost HPP can serve 10 years, this period is guaranteed by the manufacturer, during this time it will not be necessary to replace the roof waterproofing.
Features of use
Before you get Bikrost HPP, what is it, you need to find out. It is used as the lower layer of the built-up roof; during the arrangement of the system, vapor barrier is used, which is laid in two layers, among other things, vapor barrier can be laid in one layer. Bikrost HPP is used as the lower layer, while the Bipol ECP acts as the upper layer.
Material Specifications
Vapor barrier Bikrost HPP has excellent quality characteristics. The temperature at which the binder component becomes brittle is at around -15 degrees. Flexibility on a beam with a radius of 25 millimeters is achieved at a mark of 0 degrees. The material is able to demonstrate heat resistance at grades up to +80 degrees. The tensile tensile strength is 294 N. The protective coating of a material is a film that is used both from below and from above.
Bikrost HPP, the characteristics of which are described in the article, has a thickness that is equal to 2.6 mm. The water absorption of this waterproofing material is 1 percent by weight, which is true if moisture will affect the material for 24 hours. Bikrost HPP is absolutely waterproof. Before purchasing, it is necessary to familiarize yourself with the parameters of the roll, so the width and length are 1 and 15 meters, respectively. The useful area of the roll is 14 m 2 . The weight of the bicrost HPP, or rather the weight of one roll, is 45 kilograms. Using bikrost HPP, you will need to use mastic, aerator, primer, funnel, burner.
Styling technology
Bikrost HPP, the weight of the roll of which you need to know before purchasing, is a surfaced material, which should be laid in a gas-flame way using a propane burner. If a single-layer coating of the base is used, the surface should be pre-treated with a primer represented by a bitumen primer.
Packing and dimensions
When buying on a pallet, you will be delivered 23 rolls, which is 230 square meters, the weight of one such pallet filled with material will be 1035 kg. Rolls are delivered on pallets made of wood, the size of one roll is 1, 12 x 1, 20 meters. The material will be installed vertically and protected by a shrink bag. To avoid deformation during transportation and storage, the rolls are equipped with heart-shaped bushings made of cardboard. On each pallet of materials you will find a label indicating some parameters, including: manufacturing plant, batch number, shift number, material grade, number of square meters, production date, as well as the name of the material. Bikrost HPP is produced according to TU 5774-042-00288739-99 and corresponds to SNiP 23-01.
Area of use
Bikrost HPP is used to equip the lower layer of the roof, which should be flat. Among other things, this material is used for waterproofing works in the field of the foundation, it is used for waterproofing the floor, as well as basements. It is used for vapor barrier of the roof of the garage, for screed, for pools, bathrooms, as well as pipe insulation.
Additional material features
The material can be used as a lining carpet, but it cannot be used as a topcoat for a roof, this is due to the fact that the material does not have a protective top layer. It can be compared with roofing material. Despite the fact that the life of the material is very short, this minus is compensated by its insignificant cost, we can say that the material belongs to economy-class goods, it is very similar to this material according to the characteristics of bicrost HKP. As its only difference, one can single out the fact that the top layer has a sprinkle in the form of crumbs. Due to this, it can be used as a roofing material on roofs, but at the same time, the surface should not experience heavy loads.