Rolling shutters in the toilet today are installed by an increasing number of owners of apartments and private houses. This design is designed to hide communications in the false wall. In a hollow space, not only water supply and sewage systems can be located, but also filters, water heaters, as well as water meters. A similar addition to the bathroom will be not only practical, but also quite attractive, as well as functional. It is customary to install shutters during the repair of a room at the same time as replacing communications and installing meters, as well as additional equipment. This requirement is due to the fact that it is at this stage that a niche is formed, and the curtain that is appropriate in size is selected. Consumers choose this approach also for the reason that it allows easy access to pipes. When choosing a roller shutter in a toilet, you should not try to save money, since high-quality products of this type can also provide good enough sound insulation.
Design Features
Before starting work, it is necessary to familiarize yourself with the characteristics of the products described, this will allow for installation work, which will not imply the need for alterations. Roller shutters in the toilet are a canvas, which consists of lamellas. From above, the curtain is wound on a shaft located in a protective box. Inside the upper part there is a spring, which is designed to balance the mass of the canvas, excluding the unwinding of the roller shutter under its own weight. This function is necessary for fixing the lamella without lack of attachment. Before starting the manipulations, it is necessary to measure the width of the opening, if this indicator is less than 52 cm, then the roller shutters cannot have a spring mechanism. For this reason, it is necessary to mount blinds that have a cord mechanism.
Installation methods
If you decide to mount the roller shutters in the toilet, then you need to know about all the methods of installation. The process can be carried out so that the box is located inside, outside or superimposed on top. The method of work must be selected, taking into account the specific design of the opening.
Installing the roller shutter box inside
Such an approach is the most optimal solution. At the same time, it is important to make sure that communications allow to deepen the box. Measurements must be made after the alignment of the walls is completed. But these manipulations are performed until the tile is laid. This will fix the structure on the wall. In the future, when using tiles as the finishing decorative material, it should be laid from the installed structure, gradually moving towards the doorway. In this case, it will be possible to obtain the effect of recessing the guides on the thickness of one product. Whereas the seam located between the guide and the finishing materials will be completely invisible.
Installing the roller shutter box out
If you decide to install roller shutters for a sanitary cabinet in the toilet, then you can carry out the work by installing the box outside. This option is relevant when the communications are in close proximity to the opening, and there is no way to position the box inside. Measurements should be made after the tile is on the side walls. Mounting will need to be done directly on the decorative material.
Wizard Tips
The tile, which is laid on the side surfaces, must go into the opening by 5 cm. This will leave the concave side of the structural elements visible. If the cladding has already been completed, then the design should be finalized by installing on the tile. Installation in the opening will reduce the useful width by double the width of the guide. This figure is 53 millimeters on both sides. The usable height will also be reduced, but in this case to the height of the box. If the opening is quite low, the box will take up an unacceptable volume. If you will be installing roller shutters for a sanitary cabinet in the toilet, it is important to choose the dimensions of the box that should correspond to the height of the opening. If the height of the structure is impressive, then the full opening of the space will require a more impressive number of turns to be wound on the shaft.
Overlay setting
Do-it-yourself shutters in the toilet can be installed on the lining. This option is used when the structure will be located on a fairly thin wall. As an example, we can cite the case when plasterboard was used as the base, and tiles were laid on it. Top guides are installed. With this method, additional fixation to the ceiling surface is not required. For this reason, a rather reliable and simple design is obtained.
Installation Technology
Installation of the roller shutter in the toilet involves the observance of several stages, the first is the installation of the box. To carry out these manipulations, decorative protection is removed from it. Then the master must fix between the walls of the niche, which are located opposite each other, fastening can also be done to the front. The latter option involves fixing to the wall on which the niche is formed.
Any home master can do this, for this it is necessary to use a puncher, with which you can drill holes. They are fitted with plugs that will hold the screws or dowels. Fasteners are installed through holes in the housing.
Mounting a mock bar
This component of the system into which the web will go is installed on the floor or in a special box, which is designed to limit the length of the niche. The strap is fastened with two self-tapping screws that are installed in preformed holes.
Work on guides
Before installing the roller shutters in the toilet, it is important to adjust the guides to the size. To do this, determine the distance from the mock bar to the bottom of the drum. This indicator will determine the length of the guides. Their installation is carried out using the same technology that was used for the installation of all elements of the system. Apply here you need self-tapping screws that are installed in the end of the niche. Installing a roller shutter in the toilet may suggest some difficulties that are associated with the installation of the canvas in the guides. In order to facilitate the work, first you need to place a place where the guides will be fixed. After they start the canvas. At the next stage, the master should make the final fixation of the guides.
What else does the master need to know
Rolling shutters for the closet in the toilet after all the above manipulations can be considered ready for use. It remains only to close the lid, which belongs to the box. Professionals advise to order the described products at the final stage of the repair of the room in the bathroom. It is recommended to do this after the niche is fully formed and ready. It is necessary to finish the ceilings and walls. However, one should not rush to install plumbing fixtures, they are mounted after the shutters are in place. This is due to the fact that the implementation of installation work, in which the blinds are involved, will be difficult when a toilet or sink is installed that blocks the opening.
Conclusion
When choosing a roller shutter, you must consider the features of the interior and the shades that the decorative materials used in the repair of the premises have. Only in this way will it be possible to ensure that the finished roller shutters (to the toilet) harmoniously look with all the elements of the bathroom.