Many people use a cooler at home. Such an acquisition is very convenient, you can always pour yourself clean water. No need to wait until it passes through the installed filter. It is important to remember that the cooler must be sanitized regularly. This procedure helps keep the container clean and prevents bacteria from appearing. How to perform this operation correctly? Consider in our article today.
Preliminary preparation
Before cleaning and sanitizing the cooler, disconnect the cable from the network. There are also a number of prohibitions:
- Do not immerse the cooler in water. If it is very dirty, then you need to use special cleaning products.
- Steam cleaning systems are not permitted. Do not work with devices that use high water pressure for cleaning.
- For sanitization of the cooler, it is not recommended to use abrasive powders for cleaning. Avoid products that include gasoline and acetone. Kerosene is also prohibited for use in this case.
How often do cleansing procedures take?
Cleaning and sanitization of the cooler should be carried out once a month. Some people prefer to cleanse once every six months. This period of time is too long for which various microorganisms appear on the cooler, causing an upset stomach in humans.
Who can sanitize?
For sanitization of the cooler, it is best to call specialists. Many companies nowadays provide cleaning services.
If there is no way to call professionals in this case, then you can carry out the procedure yourself. To do this, read the instructions for sanitizing the cooler. It details the cleaning methods.
Recommendations during the work
Sanitary treatment of the cooler at home is possible. To correctly carry out this procedure, you must adhere to the following recommendations:
- When it is time to change the bottle, you always need to rinse the bottle receptacle as well as the needle. Bacteria, as a rule, multiply in this inaccessible place. Dust may enter. In some cases, dirt accumulates in the bottle receptacle, which is difficult to clean. Bacteria begin to multiply at great speed. With timely washing of the cooler parts, this problem does not arise.
- It is worth stocking up with a clean sponge. Each time you change the bottle to a new one, you need to wipe the surface around the neck. It is allowed to use alcohol-based wipes.
- Remove the sticker and plastic packaging from the bottle. All dirt remains on the film, which accumulates during cargo transportation.
- The degree of cooler contamination should be estimated. You may need to use chemical cleaning agents in your work.
- To complete the procedure, you need to take a washcloth. Do not use materials that contain abrasive particles. They can scratch the cooler, and dust and dirt will begin to settle in these places. It is necessary to clean the container to such an extent that there is no slime and mucus left in it.
- It will take time to repeat the procedure.
Step-by-step instructions for external cleaning
If the cooler is sanitized at home with its own hands, the operation must be carried out strictly according to the rules:
- You need to disconnect the device from the network.
- It is worth walking through the body with a damp cloth.
- It is necessary to remove all parts that are not tightly fixed. All parts must be washed in a special foam. It is important to wash all parts by hand.
- After external cleaning, you can go to internal.
External cleaning of the cooler is best done on an empty system. You can wash the outside of the appliance with a dishwashing balm. There are special substances on sale that are needed to clean the cooler. It is important to process all external parts of the device. Check whether the tap is leaking.
What do you need to purchase for cleaning?
To process the cooler, you need to buy special miniature brushes. They do an excellent job of pollution. A special cleaning agent and sponges will also be required . A washcloth is well suited for this job.
Step-by-step instructions for internal cleaning
To properly clean the floor water cooler, you need:
- Remove the empty bottle from the device. It is usually fixed in the drip tray of the device.
- It will take a bucket in order to drain the water that was in the tap.
- Check how hot the water has cooled. If it really has cooled, then you can drain the hot water using a special faucet.
- Drain all remaining fluid from the unit. To do this, open the plug from a special valve. He is responsible for the drain and is located on the back of the device.
What solution should be used during cleaning?
Many people wonder what kind of water cooler cleaner is best to use. The choice of funds is huge.
Cleaning a floor water cooler will not be difficult even for a novice in this business. You can buy a ready-made solution. It is possible to prepare the right tool in a home environment.
How to prepare a cooler cleaner at home?
To prepare a high-quality product for cleaning the cooler at home, you will need:
- Citric acid, it needs no more than 100 grams. This product can be purchased at any grocery store.
- Five liters of water, it will need to dissolve acid.
How to pour water into the cooler?
To properly fill the bottle with water, you need to:
- Remove the device from the device.
- Turn the bottle holder counterclockwise, only after that it is permissible to fill the cooler with water.
How do you know that tanks are filling up?
To find out that the tanks were filled with mortar, you can click on the faucet with hot water. When the tanks are completely full, the liquid begins to flow in a continuous stream. Similarly, you can check the faucet with cold water.
When the tanks are full, you must connect the cable to the network. The switch responsible for the flow of hot water must be set to the “on” position. The switch is set to position 0 when the water has warmed up well in the system. After that, you can pull the cord of the device from the network. The solution from the tank can be drained after six hours. It is important not to forget to drain the water from the taps. There is a valve for draining water, through it the remains of the finished solution.
How much water is needed to flush the cooler?
About four liters of liquid should constantly circulate in the system, it must be washed off after six hours. Do not forget to open the drain valve. In this case, the water itself will leave the tank.
What are the nuances in this process?
There are a number of cooler models in which a compressor cooling system is installed. Some include a fan. It is necessary to clean his blades with a damp cloth.
One of the main errors in sanitizing the cooler is the lack of sanitary work in the area where the bottle touches the bottle receptacle. This area should be treated with special care, because it accumulates the most microbes.
Conclusion
So, we examined how the cooler is sanitized. As you can see, the procedure can be done with your own hands. But you need to clearly follow the instructions and know the nuances described above, then the result of sanitary cleaning will not disappoint.