Today you can’t do without improvised tools in a country house or in a private courtyard. This is known to every owner of real estate within the city or beyond. For the preparation of logs and the creation of business buildings, a saw, an ax or a chainsaw are required. The latter is purchased more often than electric models for the reason that it is not tied to a power source. However, gasoline units differ in weight and configuration, so it is quite difficult to make a choice.
If you have not yet decided which equipment option to purchase, then you should figure out where the device will be used. The weight and power of chainsaws are designed for different applications. Manufacturers supply three groups of tools to the market, each of which copes with the tasks set, so it is important to decide what kind of work you will perform on the site with a chainsaw.
For small gardening, a chainsaw of the lowest power, which belongs to the amateur class, is suitable. It is designed for periodic operation, which does not exceed an hour per day. On the market you can find a semi-professional tool that will be able to help even when building a house. If you are only at the initial stage of construction, it is recommended to purchase just such a chainsaw, the weight of which can be about 6 kg.
With the help of a professional saw, you can even cut down the forest. The saw will cope with these manipulations throughout the day. If you still can not decide which device to purchase, then you should pay attention to the Huter BS-45 chainsaw, reviews of which will be presented below. Its cost is only 4700 rubles.
Description of the chainsaw brand BS-45
If you need a chainsaw, then you should pay attention to the model mentioned above. It works due to the engine, whose power is 2.3 liters. from. The tool is intended for domestic use, for example:
- small construction;
- garden care;
- sawing firewood for the fireplace.
The chainsaw has a chain brake, which ensures safe operation. The manufacturer took care of the presence of a 45-centimeter tire in the kit. Among other things, the chainsaw has an anti-vibration system.
Specifications
Huter BS-45 - a chainsaw, reviews of which you can read in the article, has quite outstanding technical characteristics. Among others, it should be noted the groove width, which is 1.5 mm. The number of links is 72.
Chain pitch is equivalent to 0.325 inches. The tire is 18 inches long. The capacity of the fuel tank is 0.55 liters. The power of the chainsaw is 1.7 kW. Quite often, professionals are interested in engine size, in this case this parameter is 45 cm 3 .
Model reviews
According to consumers, the Huter chainsaw described in the article is distinguished by many positive features, among which are:
- convenience;
- effective cut;
- safe work;
- reliable retention.
As for convenience, it is provided by the presence of an air filter, which is reliably protected by a special casing. The latter can be easily opened using the swivel wheel. According to home masters, the model described in the article allows for effective cutting. A chainsaw is suitable for trimming small trees and harvesting firewood.
The Huter chainsaw is chosen by customers quite often also for the reason that it ensures safe operation. If the front stop is impacted, the brake will instantly apply and the saw chain will stop. The manufacturer took care of the reliable holding of the tool in his hands. This is made possible thanks to the handle, which has a fairly comfortable shape. The lower part of the handle is extended, which protects the operator’s hands when the chain breaks. The described chainsaw, a photo of which is presented in the article, according to experts, has many additional advantages, among them it is impossible not to distinguish:
- automatic chain lubrication;
- controls that are located on the handle;
- light weight;
- vibration damping system;
- reliability and lightness of the tool.
Chainsaw Repair
A chainsaw, a photo of which you can find in the article, has a candle. When a tool breaks down, it is first of all required to examine this particular part of the mechanism. To do this, the wire is disconnected, and the candle itself is twisted using a key. If it is covered with black soot, then this may indicate the use of low quality oil. Sometimes a black soot is indicated by an incorrect calculation of the ratio of oil and gasoline and improper carburetor adjustment. The candle is washed, cleaned of soot with a needle or an awl, only after which you can wipe the electrodes with a sandpaper.
If it is dry, the fuel mixture does not enter the cylinder. The problem in this case is not the ignition system, so the spark plug can be installed back.
If the spark plug is splashed with fuel, then an oversupply of the mixture may be due to a violation of the start rules or improper carburetor adjustment. The spark plug should be wiped off, the fuel supply shut off and the starter turned on so that excess fuel can be removed. After you check the combustion chamber, the candle can be replaced and the equipment can be started again. Huter BS-45 chainsaw repair can always be carried out independently.
Fuel supply system and its repair
If you encounter a problem that is expressed in the fact that the fuel does not enter the cylinder, this can happen due to a dirty filter. To solve the problem, the fuel hose is removed, which will allow you to check how the fuel flows. Filter cleaning is required if the jet is rather weak. It should be removed or replaced with a new one.
The fuel filter is replaced every three months. Fuel may be absent or inadequate. The cause is a clogged air filter. When air ceases to flow into the carburetor, engine operation is disrupted. The filter should be removed, cleaned in water, and then dry and reinstall.
Muffler cleaning
Quite often, novice home masters wonder why the chainsaw stalls. At low speeds, the tool can work flawlessly, but at high speeds it starts to stall. A muffled spark silencer may cause malfunction. The muffler should be removed, disassembled and cleaned of carbon with detergents. The node is dried and installed in place.
It is important to remember that dry cleaning should not be carried out, because carcinogens are present in the tan, inhaling them is harmful to health. After the silencer has been removed, the exhaust outlet should be closed with a rag. Hooter chainsaws, reviews of which are often the most positive, have a silencer. Its clogging can be prevented by monitoring the fuel mixture. The amount of oil should not be more than normal. If you use low quality oil, this can adversely affect the operation of the engine.
Dismantling a chainsaw
Any equipment from time to time requires repair, which is accompanied by disassembly of the equipment. If we are talking about the described chainsaw, then first you need to remove the handle, which is fastened to the body with three rubber shock absorbers. To do this, remove the plastic plugs, and then use a screwdriver to squeeze out the upper shock absorber and the one that is closer to the rear handle.
At the next stage, you can proceed with the removal of the upper housing cover; for this, four screws should be loosened. The starter is removed simply, no problems should arise. Then you can unscrew the inner cavity. The flywheel is twisted with effort, so to remove it you need a head with a metal knob.
As soon as the piston in the cylinder is blocked, you can unscrew the flywheel nut. Before disassembling the clutch, it is recommended to dismantle the drive sprocket. To do this, the lock washer is removed and the sprocket is removed, as well as the needle bearing. To remove the carburetor, you need an 8 head and an extension cord. But first, the ignition wire and the air damper rod are disconnected. Huter BS-45 chainsaw assembly is carried out in reverse order.
Chainsaw instruction manual
The oil tank capacity of the described chainsaw model is 0.2 l. However, this information is not the only one that a consumer must know for the correct operation of the device. It is important to familiarize yourself with the manufacturer's instructions. From it you can learn about safety requirements. For example, the machine must not be used in rooms with flammable and explosive substances. The exposure conditions for splashes and drops are also not suitable for the operation of a chainsaw, as well as open areas with precipitation.
If during operation you notice any malfunctions of the equipment, then the use of the tool must be stopped. These cases include cracks in the case, slippage of the chain, deformation of the tire, leakage of fuel and extraneous noise. It is important to provide good lighting for the work area. The product should not be overloaded. It must be used strictly for its intended purpose. The workplace must be kept clean. Before turning on the chainsaw, it is worth checking to see if you forgot to remove screwdrivers, keys and other tools from the working area.
Recommended Fuel Mixture
Huter BS-45 chainsaw reviews should help you make the right choice. But during operation, you should be guided by the manufacturer's recommendations. From them you can learn that it is necessary to use the tool with a correctly prepared fuel mixture. The oil must be of high quality and designed for two-stroke engines with air cooling. Do not use oil for water-cooled engines. The oil must be API Certified (JASO), otherwise operating the equipment could cause the engine to run at low lubrication.
The manufacturer recommends the use of unleaded high-quality AI-92 gasoline. When preparing the fuel mixture, you must use the volume ratio of gasoline and oil specified by the manufacturer. If you did not see the information on the oil packaging, then a ratio of 40 to 1 (gasoline / oil) should be used. A For mixing, it is recommended to use a graduated measuring tank. Do not mix ingredients in the fuel tank.
Fuel tank filling
The Huter BS-45 chainsaw , the operating instructions of which are supplied in the kit, must be operated with the fuel mixture poured into the tank according to the technology. The product should be positioned horizontally with the tank cap facing up. First you need to turn off the engine and make sure that there are no sources of open flame near. The mixture should be prepared in such a volume that it is enough for only one dressing. Fuel should not be left in the equipment tank.
Work recommendations
Hooter chainsaws, reviews of which you could read above, should be operated in accordance with the instructions. From it you can understand that you need to hold the device with two hands. If you do not control the sawing process of the material, then a back strike may occur. When the chain brake is in good condition, it will protect the operator from possible shock.
The chain may be caught by a log if the sawing of wood is not carried out correctly. In order to exclude such a development of events, it is important to decide how you will saw the wood. You can start the process from above, for this a cut is made on a quarter of the diameter of the log. When cutting, you should not make efforts, a saw under its own weight will allow the sawing process to be conducted. If the chain is clamped, the engine should be stopped and the position of the log changed.
Maintenance
Reviews of the Huter BS-45 chainsaw quite often help consumers make the right choice in the direction of this model. If you have already become the owner of such equipment, then you should familiarize yourself with the features of maintenance. It is important to keep the lubrication holes clean. They should not be lumps of dirt, foreign objects and oil clots.
Lubrication holes should be checked regularly and cleaned if necessary. Using a grease gun, the operator is to lubricate the driven star of the tire. Such manipulation should be carried out before sawing. In order to regulate the amount of oil that is supplied to the circuit, use the pump regulator. To increase or decrease the amount of oil, the bolt must be turned to one side or another.
The cost of spare parts and equipment
Quite often, consumers purchase a hand - held machine for sharpening chainsaw chains. Its cost may be different, but the most common models have a price ranging from 800 to 2000 rubles. When choosing such devices, it is important to pay attention to the number of revolutions per minute. In the case of the DIOLD MZ-0.13 model, this parameter is 2500. Its power is 130 watts.
Another manual machine for sharpening chains of chainsaws is DIOLD MZS-01. Its cost is equivalent to 2200 rubles, while the power is 70 watts. You may also be interested in the Huter BS-45 chainsaw parts. For example, a piston can be purchased for 400 rubles. But the piston group will cost 1100 rubles. Piston rings are supplied to the market at a price of 150 rubles. A cylinder costs about 700 rubles, while a crankshaft costs 650 rubles.