If you are interested in the Belmash SDM 2500 machine, then you should know that it is equipment that has the highest power among the models in this series. The device is characterized by unique operational and technical qualities. Thanks to them, the device with equal efficiency can be used to solve problems in everyday life and small-scale production. However, if you do not often use such equipment in the household, it is recommended that you purchase equipment that is cheaper and easier in functional terms.
Appointment Reviews
The Belmash SDM 2500 brand machine is intended for processing wood products; according to users, they can have different shapes and configurations. The design can be used for a long time, it has a compact size and not so impressive weight. Additionally, consumers turn their attention to affordable cost. If you are considering such equipment and want to purchase it for yourself, then, first of all, it is necessary to consider possible operations. To do this, you should familiarize yourself with the information from the technical passport, as well as with the performance.
Consumers point to the need for a sustainable desktop, as the equipment is not so impressive in height. You can consider the option of buying a finished design that was manufactured in a factory. According to customers, Belmash SDM 2500 brand equipment can:
- planing;
- scribble;
- to saw;
- to milling;
- drill.
If you need to mill a part, then you should know that the device has several processing modes of this type, this can be work with ribs, edges and plates. But sawing can be performed along and across the fibers of the workpiece.
Cut at an angle
Especially often, users carry out cutting at an angle, for this the manufacturer has provided for the presence of a special device. But you can mill with the help of end and disk mills.
"Belmash SDM 2500" can be used in open areas, in non-residential premises or under a canopy. In order to remove production waste, the design has a pipe for connecting a chip pump. It must also be taken into account that the equipment does not have special protection against moisture. If you want to transport the equipment, then you need to install it on the work surface, securing the moving parts before that.
Positive feedback
The Belmash SDM 2500 machine has many advantages, but it is not without drawbacks. For example, the manufacturer took care of reliability; for this, changes were made to the design that positively affected the duration of operation. According to customers, plain bearings are inserted into the articulated pairs, which are located in an acute-angled table . They increase uptime. For the reason that the design is small in size and weight, there are additional stiffeners in the frame. Buyers claim that this supplement can increase the stability of the structure.
A positive feature is the build quality, locking of planing tables, as well as the presence of components with which the user can increase the number of operations performed. It is impossible not to mention the welded construction of the case, due to the absence of bolted joints, the backlash is reduced during the operation of the machine.
Security
To ensure maximum security, you will not be able to perform two manipulations at once at the same time, this is ensured by locking the tables. The device can be connected to a household electrical outlet. Switching the machine off and on can be carried out with a movable block, with the help of its design you can easily change the position, which, of course, will depend on the location of the operator relative to the machine.
Negative reviews
Woodworking machine "Belmash SDM 2500" has some disadvantages that users consider not so impressive. For example, the manufacturer did not take care of the presence of a measuring line on the surface of the desktop. When fixing the height of the disk, during which the lamb is used, it is displaced relative to the vertical plane. That is why the user has to control the cutting angle manually.
Additional expenses
The disadvantage, according to customers, is the need for an additional compressor. It will allow you to timely get rid of excess chips during the operation of the machine. One of the problems is the clogging of the output channels shortly after the start of work, this can cause a decrease in the quality of processing products.
Technical Specifications Reviews
The Belmash SDM 2500 woodworking machine, reviews of which can help you make the right choice, has unique characteristics. In order to learn how to work with the machine, you must study them. For a detailed discussion, it is best to analyze each function separately. For example, the dimensions of the structure are as follows: 94.9x84.9x51.2 cm. The total mass of equipment with additional components is not more than 56 kg. The rated power consumption when connected to an electrical household network is 2.5 kW. This, according to customers, is enough to handle even massive wood blanks at home.
You should consider in more detail and characteristics of planing. Thus, the maximum width is 270 mm, but the maximum thickness of the workpiece is equivalent to 65 mm. The value is specified subject to the use of the mode device. In one pass, you can set the depth to 3 mm. But the permissible dimensions of the part to be processed are 200x27x11.7 cm. When consumers purchase the Belmash SDM 2500 multi-function woodworking machine, they also pay attention to the dimensions of the table, for the described model they are 90x28.7 cm. Clamping device made of plastic, in practice it is not used, since it has a rather poor performance. As an alternative, consumers use home-made designs.
Sawing blanks is carried out using a disk, which is located in the central part of the desktop. The design implies the possibility of changing position relative to the surface. This allows the user to adjust the depth of cut.
Sawing characteristics reviews
"Belmash SDM 2500", the clamping device of which, as mentioned above, is often not used in practice, has certain sawing characteristics. For example, the depth range varies from 0 to 11.7 cm. But the dimensions of the disk mill for Belmash SDM 2500 are no more than 12.5 cm. According to customers, the maximum possible disk diameter is 31.5 cm, but the ranges sawing angles along the fibers are 45 °, if we are talking about transverse processing, then the degrees can vary in both directions.
Users are advised to use a drive instead of a saw blade when forming grooves of a special shape. It is important to note that this element is not provided for in standard equipment. The end mill must be used on a separate desktop, through this node you can perform drilling, and for this the consumer will have to use a special chuck.
End Drill Performance Reviews
Consumers pay special attention to the characteristics of milling, while the diameter range can vary from 6 to 12 mm. The size of the desktop in this case is 47x19 cm, and the shaft speed is 770 revolutions per minute. To install the equipment, a minimum table area is required, which is limited by the following dimensions: 44.1 x 24.6 cm. Consideration should be given to ensuring the stability of the device. As buyers emphasize, otherwise vibration may occur, which causes defects on the surface and equipment failure. If you use the Belmash SDM 2500 machine according to the instructions, reviews about which quite often are only the most positive, then the deviations of the angular dimensions will not exceed 5%. But an increase in machine power is possible by 15% or less.
Positive performance feedback
According to users, this equipment has the perfect combination of price and quality. The device is planing and sawing, and its adjustment is relatively simple. The user will be able to set the cutter, and in the process of work to develop creative thinking. If you need to periodically carry out work in the workshop or in the country, which do not provide for great accuracy, then this unit is perfect. The engine is powerful enough, for half a year the majority of users have never failed it. The clamping device greatly helps some users, despite the fact that its quality, as mentioned above, is not so high.
Using the Belmash SDM 2500 brand machine, reviews of which help many users to make a choice in his direction, consumers note that the cut height and the high quality of the disc are pleasing. It is also worth noting the minimal curvature of the work surface. To raise and lower the saw, you don’t have to make special efforts, it is quite simple to carry out these manipulations. The manufacturer also took care of a soft start, which works well in operation. The start and stop handle is thought out, this is noted by many buyers.
Conclusion
Quite often in working with the equipment described above, it is necessary to use mills. For Belmash SDM 2500, you can purchase similar consumables for 1500 rubles. Consumers may also be concerned about the question of whether it is possible to eliminate the curvature of the table. Many users try to solve this problem. However, perhaps it can be called one of those that are not so significant in working with such equipment.