In the modern world, there is rarely a house to which wires from the telephone network or the Internet are not connected. To use these communications was convenient, you may need to connect them through a special outlet. In addition to the special shape of the connector, it has certain qualities and an internal structure.
Connecting such an outlet is easy. Therefore, all actions can be performed independently. How to connect an outlet for the Internet, help to understand the instructions and recommendations of experts.
By clearly following the sequence of actions, as well as observing the safety rules, you can make a connection efficiently and quickly.
general characteristics
Before considering how to connect an outlet for the Internet, a few words should be said about the features of its device. The main difference is the presence of a twisted pair of wires. There are 4 of them in total. Accordingly, the wire socket accepts 8 pieces. They twist, interrupting electrical noise.
This allows you to achieve high quality communications, as well as a good speed of information transfer (up to 1000 Mbit / s). The connector that is used by different manufacturers in such outlets is called RJ-45. It is present in the vast majority of products.
This input is applicable for connecting wires from the Internet or landline phone. Connection is made according to specific instructions.
Preparatory work
Before starting work, it is necessary to prepare all the tools and materials at hand. In the wall with the help of a puncher with a round crown, a place for installing a socket box is drilled.
When considering how to connect an Internet outlet and a Schneider, Legrand telephone, you should know the general principle of this process. At the preparation stage, all actions will be the same.
After drilling the recesses in the wall, the installation site is thoroughly cleaned of construction debris. Socket set in the recess. To fix it, an asbestos mixture is used.
Next, you need to pay attention to the outlet itself. It will need to be disassembled. The manufacturer's instructions describe this process in detail. But the principle for all outlets is approximately the same.
Parsing a socket
When studying the question of how to connect an outlet for the Internet, you should familiarize yourself with the principle of disassembly. There are mixed varieties of products presented. There are also connectors designed specifically for connecting a cable from the Internet. There are also such varieties of sockets that allow you to connect multiple computers to the network at once. It is convenient for offices, industrial premises. In this case, all the wires will be located in their places, will not be confused underfoot.
Disassembly of any outlets is identical. The product is turned to itself with the back side. There is a special lock (snap ring). It is rotated clockwise. In this case, the control mechanism is separated from the terminals. Next is the process of connecting wires.
Wires and contacts
When considering how to connect an outlet for the Internet Legrand, Schneider and other manufacturers, you need to understand their scheme. There are terminals at the back of the product. They are marked with special colors. Each of them clearly corresponds to the color of the conductor.
Before connecting the cable is not cleaned from insulation. Only the common protective tube in which the contact pairs pass is removed. The terminal clamping mechanism is designed so that it correctly cuts the sheath of the core. So the contacts fit directly to the conductor material.
When stripping the insulation, it is likely that the core will be damaged. There are 2 basic wiring diagrams. They are called A and B. The choice depends on how the service provider brings the network to the consumer. Therefore, before installation, it is necessary to consult with the provider about the circuit of their conductors.
Power outlet
Considering the question of how to connect the Schneider, Legrand Internet outlet, you need to refer to the manufacturer's scheme. The wires are individually lead into the corresponding color terminals. Then they are tightened, allowing the contact pads to touch the conductor core.
Next, the system is checked by connecting a router or computer to it. If everything works correctly, you can install the design in the mounting box. The procedure is similar to disassembling the outlet. The circlip is tightened. The front panel is replaced.
To strengthen the fastening of the wires in the terminals (optional), use a special tool. Professional installers also have an indicator in their arsenal. It allows you to accurately determine which terminal a particular wire is connected to.
Connecting a CAT3 outlet
If you need to understand how to connect an outlet for the Internet and a phone, you should familiarize yourself with the simple instructions for this process. There are several features to this business. The presented proofreaders are most often produced by the French company Legrand. Its clamping mechanisms belong to the development of a new generation.
Reliability of the brand was appreciated by users of our country, as well as residents of near and far abroad. For example, you can consider how to connect a power outlet for the Internet Legrand Valena.
The telephone wire consists of 2 contacts. But, for obvious reasons, there are more terminals. To find the appropriate connection points, the wire must be exposed. This is best done with a lighter. After this, the core is applied to the contacts until a beep appears in the tube. Further, the procedure occurs according to the above technology.
Sockets Schneider
If, for example, you need to find out how to connect a Schneider Electric Glossa Internet outlet or another model of this manufacturer, you need to consider a number of their features.
The presented brand is known all over the world thanks to the special capabilities of its products. Such sockets for the Internet allow you to connect multiple computers to the network simultaneously.
When designing the future system, this is taken into account, leading to the place of powering several separate wires at once. This system is suitable for office rooms, as well as for people who have several computers at home. In this case, the need for a router disappears.
But if the owners of the house want to use portable laptops, as well as the Internet on the phone and other devices, it is better to prefer a stationary device that distributes Wi-Fi.
Connecting a two-channel outlet
In search of an answer to the question of how to connect an Internet outlet with two autonomous cables, you should familiarize yourself with the manufacturer's instructions. Two wires are taken out of the junction box at once. They remove the protective layer (approximately 4 cm).
All wires are distributed into separate 8 contacts. Using a thin screwdriver, without stripping the veins, they are brought into one and the other terminals. Next is the clamping procedure. After that, the correct connection is also checked. Computers turn on and evaluate the Internet. If everything functions correctly, you can install the system in the socket.
For this, the reverse action is disassembled. The circlip also pivots back. Such work does not take much time. But with special tools, you can perform all the actions even faster. Therefore, professional installers must have in their arsenal a complete set of necessary tools at work. For a one-time connection, it makes no sense to purchase an expensive tool. It will be enough to prepare its universal varieties.
Having familiarized yourself with the technology of how to connect an outlet for the Internet, you can perform all the actions correctly and effectively. Knowing the detailed instructions, even a master with minimal experience will be able to perform the job efficiently.