To build a frame-shield house with your own hands is a matter that at first glance does not require special preparation and skill. But first you need to study the technology, as well as choose the foundation that is suitable for the soil available on the territory of the proposed construction. A shield house, being built on a site with its own hands, will require the purchase of specialized building material from the developer. The cost of acquiring the material will pleasantly surprise the developer with low cost in comparison with other types of building materials and construction methods that are characteristic of the territory of Russia.
Do it
yourself with your own hands to start laying the
house with a frame-panel board building from the fence on your site. However, this is the case with any type of development. A fence is necessary if only to protect the building material from potential thieves, which can also be your friendly neighbors. For its manufacture, different materials are suitable - from the cheapest, for example, edged boards, to quite expensive, for example, bricks.
For this type of development, you can choose as many types of foundations as you like, and all of them will be compatible with your project.
Do-it-yourself frame-panel house
erected on the site, is a prefabricated structure of a wooden frame, which is lined on both sides with wood fiber
boards or
unedged boards. Insulation and vapor barrier are placed between the two panels. Insulation, as a rule, is mineral wool, fiberglass or expanded polystyrene. In modern construction, panels for frame houses are produced in factories, and they come to the buyer already arranged and ready for installation. This technology minimizes construction time.
Next, we describe in detail the rules and principles of joining the beam.
Take the most common method, that is, we cut half the beam from its ends along the width of the sample, equal to the thickness of the beam. To ensure proper rigidity in the middle of the joint, a wooden pin (nail) is driven into a pre-drilled hole. Nagel should fit tightly into the groove intended for him. Compounds of this type are used for corners and cuts, so that the frame-panel house, built with its own hands, is strong and durable.
Laying the base for the frame is as follows. The base is laid out of two bars. In the upper beam, cuts are made to a depth of half, and in width - to the size that the beam itself has. The frequency of cuts is determined by the number of suspected racks.
The racks themselves are cut exactly in size and are installed in the finished grooves. After they are all installed, in the same way we fix the upper beam. The dimensions of the lower and upper frames must be strictly identical. When installing the racks, temporary jibs should be installed, which after installing the upper frame must be removed. The racks must be aligned vertically using the building level. Longitudinal jumpers should be installed without tension, and only with nails with a size of at least 120 millimeters. As you can see, the house is a frame-panel house with its own hands to build is not difficult, of course, with proper preparation and proper planning.