Electric planers are great for planing boards as well as whetstones. Interskol company offers its customers many models that are perfect for both professionals and beginners. When choosing a device, you should pay attention to the size of the knife, rated power and speed. In terms of dimensions, planers are quite different.
Some models have a separate nozzle for chips. The tool frame is most often made with a lining. Some modifications use an adjustment starter. For professionals, such devices are great. An average model costs about 8 thousand rubles.
Instructions for using the tool
Before using the tool, it must be adjusted. For this, a knife is set, which is located at the bottom of the structure. The height of the plate is adjusted by a rotary mechanism. The chip pipe must be open. Before connecting the instrument to a 220 V network, it is important to make sure that the start button is not turned on. After connecting the model, the power is set. If necessary, the height of the plate may be adjusted.
Model repair
Most often, a rotor breaks at planers. The specified element is located near the motor. In order to repair the tool yourself, you have to use the key. First of all, the protective cover is removed from the bottom of the case. After that, the starter is removed directly. The next step is to twist the lining. Behind it is a rotor that is mounted on screws.
After detaching the part, it is checked for defects. If the device burns out, black marks will be visible on it. In such a situation, the model cannot be repaired. Also, the problem may be a breakdown of the capacitor, which is located inside the rotor. Its performance is checked using a tester. If the threshold resistance value is below 30 Ohms, then the rotor will have to be completely replaced.
Description of the planer "Interskol R-110"
The indicated planers (electric) "Interskol" reviews, as a rule, get good. The power of the tool is 3.5 kW. If you believe the reviews of experts, then for the planing of boards, the model fits perfectly. The holder in the device is used with a latch. If necessary, it can be adjusted in height. The plate of the model is located under the motor.
According to the owners, the rotor breaks very rarely. There is a dust and moisture protection system in the device. The model is suitable for processing pine boards. The knife is set at a width of 4.7 cm. Setting the planer "Interskol" does not take much time. The gearbox is of the collector type. The standard tool kit has a ruler and a key. If you believe the reviews, the bottom cover can be removed without problems. You can buy this tool on the market at a price of 7800 rubles.
Reviews about the model "Interskol R-102"
Reviews on planers "Interskol R-102" can be found in a wide variety. For professional use, they are not suitable. The motor in this case uses small power, and the maximum frequency indicator is 1,500 rpm. For processing pine boards, the model is often used. The stand is not very wide, and the modification weighs a little. The width of the knife is 5.2 cm. The holder in this case is missing.
A moisture protection system is not provided for the instrument. If you believe customer reviews, then problems with overheating of the motor are observed infrequently. The plate in this case is easily adjustable. The handle is used with a polymer lining and does not slip in the hand. The tool frame is made of stainless steel. The model is suitable for processing pine blocks. Of the shortcomings, it is important to mention the high noise parameter. At maximum speeds, the model produces as much as 77 dB. It is possible to buy the specified Interskol manual plane at a price of 7 thousand rubles.
Parameters of planer "Interskol R-105"
Plane "Interskol R-105" has a lot of advantages. Experts praise him for a quality knife. The plate is included in the standard set of the adjusting type. The instrument controller is mounted in front of the structure. According to customers, knives can be set up very quickly. The network cable is used without a holder. The set includes a compact key for the planer. You can twist the bottom cover of the tool without any problems.
A dust protection system is available. The pipe in this case is located near the base of the planer. Permissible operating temperature is a maximum of 45 degrees. The width of the knife is 5.4 cm. The starter at the plane is used with the controller. Instructions for the planer "Interskol R-105" are in the set. The gearbox is used with a feedthrough capacitor. The model has no moisture protection system. The user is able to buy a plane of this series at a price of 6700 rubles.
Description of the planer "Interskol R-82TS-01"
The plane of this series is ideal for repairs in the house. Among the features of the modification, it is important to mention the quality pen. The lining in this case is made of polymer. If you believe the reviews of experts, the motor of the model is used in high quality. The model is suitable for processing maple boards. The holder in this case is made of plastic.
The width of the knife is 4.6 cm. If necessary, the user can adjust the angle of inclination of the plate. The power cord is 1.2 m long and does not interfere with planing. The stand is made entirely of stainless steel. The controller in the model is used with a starter. Nowadays you can buy a plane at a price of 7900 rubles.
Reviews about the model "Interskol R-55"
The planer of this series of reviews is mostly positive. For professionals, the model fits great. The power cord in the device is used with a holder. According to customers, the plate is adjustable without problems. If necessary, it can always be cleaned. A dust protection system is not provided. Motor power is as much as 4.6 kW. The frequency at the same time reaches a maximum of 2300 rpm.
The gearbox in the tool is used with the controller. The speed controller is located in front of the structure. The instrument has a moisture protection system. Starter used wired type. The width of the knife is 4.7 cm. The angle of inclination of the plate can be adjusted without problems. The permissible temperature level during operation is 40 degrees. The key for removing the plate in the standard kit is. You can disassemble the Interskol planer quickly. The rotor is used with a cover. You can buy a plane of this series at a price of 7800 rubles.
Parameters of the planer "Interskol R-82TS-05"
Another model of the Interskol trademark, the R-82TS-05 plane, is produced with a power of 4.3 kW. The frequency at the same time reaches a maximum of 1400 rpm. The gearbox in the model is used with a controller. If you believe the reviews of experts, it rarely breaks. It is also important to note that the model uses a plate overheat protection system. For processing maple boards, a planer is great.
The moisture protection system is used in the third degree. The starter in the device is used in high quality. The width of the knife is 4.3 cm. There is no way to adjust the angle of inclination of the plate in this case. A start system is provided with a rotor. You can buy this plane in a specialized store for 6300 rubles.
Reviews about the model "Interskol R-66"
What other models does Interskol company produce? The R-66 plane has a lot of advantages. Among them, it is important to note the compact size. The handle of the model is made with high-quality polymer lining. The stand is made of stainless steel. There is no softstarter for the planer. The model fits great for joining bars. The dust protection system in the device is used in the third class. According to experts, the rotor of the model is used with a feedthrough capacitor.
It cools very quickly, so it is allowed to use this tool for a long time. Among the shortcomings, a high energy consumption parameter should be noted. There is no moisture protection system for the planer. The rotor is used without a controller. The width of the knife is only 4.2 cm. There is no way to adjust the angle of the plate. The user is able to buy a plane of this series at a price of 6 thousand rubles.
Parameters of planer "Interskol R-80"
What else can Interskol trademark offer to customers? The R-80 planer is most suitable for processing whetstones. The regulator is used with the controller. In this case, the protective plate is made of stainless steel. The handle is used with a polymer pad. According to customers, the condenser is very rarely overheated. The moisture protection system is used in the second class. If we talk about the parameters, it is important to note that the power of the planer is 3.6 kW.
The frequency in this case is a maximum of 1800 rpm. For processing oak planks, the model suits perfectly. The dust protection system is used quite high quality. The stand is made of plastic. The rotor of the model is located at the rear of the structure. The model weighs only 3.2 kg. The standard set of planer has a key for removing the plate. Replacing a knife with a tool is quite simple.
In the event of a motor breakdown, it is better to repair the Interskol planer in a service center. Of the disadvantages, it is important to note the lack of a plate tilt regulator. The noise level is 79 dB. There is no overload protection for the planer. The user is able to buy the tool of this series at a price of 6 thousand rubles.
Description of the model R-23 firm Interskol
The R-23 planer is well suited for processing pine blocks. Also, the model is able to perfectly cope with oak boards of various sizes. The gearbox of the model is of the contact type. The controller is located in front of the frame. The stand in this case is missing. If you believe the reviews of experts, the plate is regulated very simply. The width of the knife is 5.3 cm. The angle of inclination of the plate can be adjusted. The power cord is used with the holder. There is a key in the standard planer set.
The moisture protection system is used in the third class. The handle of the tool is provided with a polymer overlay. The starter system is used in high quality. However, it is important to note that there is no plate height adjuster. For processing cedar products, the model is not suitable.
The noise level of the planer is 67 dB. Repair planer "Interskol" is more expedient to carry out in the service center. The manufacturer does not provide a dust protection system. The user can buy a plane of the presented series at a price of 7500 rubles.
Description of the plane "Interskol R-86TS"
It is a compact and inexpensive planer. The power of the tool is 4 kW. He has no moisture protection system. If you believe the reviews, the rotor is used with a quality controller. The power regulator is located in front of the base. The network cable is equipped with a holder. The width of the knife is only 4.3 cm. According to experts, the plate can be adjusted without problems. You can buy a model nowadays for only 5700 rubles.