Everyone wants to have a cozy and beautiful home. Often a lot of effort should be made for this. For example, if you have parquet laid on the floor, it must be restored from time to time. And you can do it yourself. Naturally, you should consider the technology of recovery of this material. After all, a tree is always successful, and it is expensive enough to change it often.
What kind of breakdowns can occur?
First, let's figure out what can happen to your flooring. So, the most common problem is the appearance of scuffs. The reason for this situation can be not only prolonged use of flooring, but also improper care for it. In addition, over time, it may begin to creak. Here it all depends on how high-quality the material was originally, as well as on whether the product was laid in good faith.
Loss of elements or their breakdown is also considered a very serious problem. In this case, of course, you have to change them. If your parquet is damaged in this way, restoration may take some time. After all, the material will have to be re-selected and all other actions performed.
Repair Preparation
Before you begin the main work, you will need to collect all the necessary tools and material. At the same time, try to do everything possible to speed up and facilitate your work as much as possible.
- Take out all the furniture that you can. Cover the rest with cellophane. Also remove all carpets, rugs, paintings. That is, the room should be freed as much as possible. The fact is that most of the actions will be accompanied by the formation of dust, so try to protect your things.
- If you have parquet, restoration includes cleaning the room before starting work. That is, remove all dust and wipe the floor with a damp cloth. Naturally, after that it should dry.
- Wear work clothes.
Floor cycling
Now the actual restoration of the parquet will take place. The price of this event ranges from 5 to 10 dollars per square meter, sometimes higher. However, you can do all the actions yourself. Naturally, for this you should know the procedure for each stage of restoration. The first of these is looping.
Before starting this procedure, try to protect yourself, that is, no shoelaces or parts of clothing should touch the machine (if any). To carry out the actions you will need a special tool for grinding wood. Thanks to this procedure, you can get rid of bumps, roughness or scuffs on the floor. The first is sandpaper No. 40. After it, you can apply a finer skin.
After the initial treatment, large cracks can be puttied. After the mixture has dried, you can go through the smallest sandpaper. Further, the room should be thoroughly cleaned.
Features of varnishing of the floor covering
So, if you have parquet, restoration also involves applying a protective and decorative layer of varnish to its surface after scraping. For this, a roller is most often used. Naturally, you can also change the shade of your flooring with blackout. To do this, you can apply a stain. Just two layers are enough to make you have a chestnut color. Before applying all paints and varnishes, try to vacuum the floor, as all specks will subsequently be visible and spoil the appearance of the parquet.
Please note that all materials that you will use must be of high quality. It depends on how long they can perform their decorative function. Keep in mind that quite a lot of varnish will go to the first coat, as it is absorbed. You will have to spend less on the other two layers. Such restoration of parquet in Moscow can be quite expensive. Therefore, knowing the technology of performing all the actions, you can significantly reduce the cost of your repair.
Features of replacing a damaged board
Restoration of the old parquet may include the laying of new elements, if the old parts are strongly shaken or fell out of the general composition. The work consists of several stages.
- First, remove the damaged item. Do it carefully.
- Thoroughly clean the hole of debris, dust and glue residue on which the strap was attached.
- At the new plank, the combs should be cut off and fixed in the prepared place with epoxy glue or nails without caps.
- The installed element should be pressed down with something. In this case, do not forget to remove the remaining glue, so that later they do not have to be scraped off.
- Next, the treated area should be cleaned and varnished.
If you just shook the elements, then you can eliminate this problem with the help of small wooden wedges. The cracks between the boards are sealed with special mastic.
Useful Tips
If you have parquet flooring, do-it-yourself restoration can be done quite quickly. However, one should not forget about some of the nuances of this procedure.
- Please note that looping should be done only along the wood fibers. At the same time, do not push the machine too much and do not linger in the same place for a very long time.
- Do not use too coarse skin, as it can damage the boards. It is better to start with a material that has an average grain size.
- Each varnish coat should dry well. This may take several days.
- For work, use only high-quality equipment.
- Do all work as carefully and accurately as possible so as not to get injured or damage the parquet.
If you are not sure that you can do everything correctly, then try to restore a small part of the floor in the most inconspicuous place. If in this case it did not work, then it is best to use the services of professionals. That's all the rules for restoring your flooring.