Ankor screwdriver among consumers has recently become more and more popular, this applies not only to home craftsmen, but also to professionals in the field of construction. It is a manual electric or pneumatic tool, among the functionality of which there is an adjustment of the depth of screwing or torque.
Description
The equipment is intended for unscrewing and twisting different fasteners, namely:
- wood screws;
- screws;
- self-tapping screws;
- dowels.
You can use the device for drilling holes. If we are talking about electric models, then they work from a rechargeable battery or an external current source, it can be a generator or a network. Pneumatic screwdrivers operate from a reservoir of compressed gas, which is usually used as air, or from a compressor. To work with screws or screws, it is customary to use interchangeable nozzles with different screwdriver tips, which are called bits and represent a steel rod.
The most common types of splines are cruciform. In some types of industrial devices, the shank has a thread instead of a hex. Bits are installed in a chuck or bit holder. The Encore screwdriver, as a rule, has a suitcase or bag in the kit, which allows you to conveniently store and carry the tool. Inside, the user will be able to find replaceable batteries and charging.
Device
The screwdriver device has several structural units, among them:
- Electrical engine;
- planetary reductor;
- coupling;
- regulator;
- electronic control unit;
- chuck;
- accumulator battery.
An electric motor rotates, but a planetary gearbox is necessary for the mechanical transmission of the spindle from the motor. The clutch regulator is adjacent to the planetary gear, the electronic control unit has a start button and a reverse rotation switch. The chuck is used to connect the working nozzles with a rotating shaft. Depending on the design features, the gearbox may have a speed mode switch. The gear case can be made of metal alloys, but in most cases it is plastic, with the help of which it is possible to reduce the cost of production and facilitate the tool. Some gear reducers can be made of plastic. But the metal case of the gearbox is able to undergo high mechanical loads, it has a high degree of heat removal compared to plastic.
Technical characteristics of the gun DShE-240ER / 10
Ancor screwdriver is presented for sale by a manufacturer in a wide range. One of the models is DShE-240ER / 10, for which the consumer will have to pay 1,600 rubles. The power of this device is 240 watts, while the maximum speed can reach 800 per minute. The diameter of the cartridge is 10 mm, but the maximum torque is 12.5 Nm. The maximum drilling diameter for metal is 8 mm. This equipment weighs 1.2 kg and comes in a box. Among the additional functionality can be distinguished keyless chuck, as well as electronic speed control. For wood, the maximum drilling diameter is 16 mm. The master will be able to work at one speed.
Design features of the DShE-240ER / 10 model
The Encore screwdriver described above is a network tool that is small in size. It is great for comfortable one-handed operation, even in hard-to-reach places. The electric motor is capable of developing impressive speed, and the power cord is long enough for convenient operation. This parameter is 2.5 m, with the help of it you can perform many works without resorting to lengthening.
Keyless chuck is designed for drills, the diameter of which varies from 0.8 to 10 mm, however, when drilling metal should be limited to the above parameters. If you want to use pen drills on wood, then the permissible diameter will be twice as large. The described “Ankor” drill / driver has electronic speed control, as well as a trigger lock in the extreme position. For the exact selection of the desired effort, you can use the fixation in one of the 9 positions of the regulator. This will allow you to perform various tasks. The model does not provide for the use of network adapters. The package includes cardboard packaging, as well as a user manual. This screwdriver is powered from a 220V network, and it can be used in a home workshop, as well as during internal finishing work.
Technical characteristics of the cordless screwdriver AKM1802 49202
The consumer will be able to purchase this model for 1800 rubles. This screwdriver can work in one of two speeds with twenty modes of torque. Keyless chuck provides easy tool change. Dimensions and weight are small, which contributes to comfortable work. The reverse function is designed to loosen the fasteners and unscrew the screws. Together with the equipment, a Li-lon battery for a screwdriver is used. The battery voltage is 18 V, while the maximum wood drilling diameter is 20 mm.
The torque is 25 Nm, but the diameter of the cartridge is equivalent to 10 mm. This equipment does not have a backlight, but its weight is 1.5 kg. For metal, you can make holes with a maximum diameter of 10 mm. The device is powered by a brush motor. You must remember that this device does not have impact functionality, but there is a reverse. An additional battery for the screwdriver is not supplied, if necessary, you will need to purchase it yourself.
Main advantages of the model AKM1802 49202
This cordless screwdriver has many advantages, among them a lightweight body and the presence of a reverse. Consumers note that the 18V screwdriver provides the ability to work in one of 2 speeds, in the first case the number of revolutions can reach 400, while in the second - 1400. For a long service life, there are ventilation holes in the case, among other things, you can use smooth adjustment electronics revolutions.
The cost of nozzles for an Enkor screwdriver
For intensive work of the tool, you may need additional nozzles. Before purchasing, it is important to familiarize yourself with the cost of this consumable. For example, a 50 mm bit will cost 10 rubles, while a double-sided 65 mm bit will cost the consumer 14 rubles. If you want to buy a whole set of bits and drills, which contains 24 items, you will have to pay 307 rubles for them.
Nozzles for a screwdriver are sold in a large assortment, among them you can find a 50-mm bit 3, which costs 10 rubles, but a 25-mm bit PZ1 will cost even less - 5 rubles, like a bit of the same length, but PZ2. But the bilateral 65 mm bits PZ2 / PZ2 and PH1 / PH2 will cost the buyer 14 rubles.
Description of the drill driver DShE-280ER / 10
You already know the device of the screwdriver, however, for the correct operation of the equipment you must also know the main characteristics of the device. For the aforementioned model, the consumer will have to pay 1600 rubles. However, other operational characteristics may affect your choice. Among them may be, for example, power, which in this case is 280 watts. As for the maximum speed, they reach an indicator of 830 per minute. The diameter of the chuck is 10 mm; the kit includes a quick-clamping chuck.
For wood and metal, you can make holes with a maximum value of 20 and 10 mm, respectively. You can buy attachments for a screwdriver in stores, the prices for them were mentioned above. The manufacturer recommends using high-quality supplies without trying to save. This is also due to the fact that the warranty is valid for a year, during this period you must test the equipment. The weight of the device is 1.2 kg; it is delivered in a box. Among the additional functionality - electronic speed control. This tool has a perfect balance of ergonomics, which ensures continuous operation without stopping.
Conclusion
According to users, the Encore screwdrivers are the perfect combination of quality and value. If you need equipment to work at home, then the above models will be a great solution.