If you are looking for a popular surface pump, which today is in demand by summer residents, then you can prefer the "Agidel". Even if there is a central water supply system in private areas, homeowners quite often prefer to have equipment on hand that allows them to water the beds not from the tap, but from the nearest well. With the help of this device it will be possible to use rainwater, which is collected during the rainfall in the tank, for irrigation of crops.
After reading the article, you might be interested in the Agidel model. This type of pump, according to users, is ready to last for a long period of time. Before purchasing, you need to find out under what conditions this device can be operated.
Key Specifications
The described model refers to a surface variety of centrifugal pumps that pump water without immersion in a liquid. The device will need to be installed near the source, dropping only water pipes or suction hoses into the water. This will guarantee a high level of safety, since the contact of the electrical wires with the liquid will be completely eliminated.
Features of the model "Agidel-M"
If you are interested in the Agidel model, you can purchase a pump of this type at an affordable cost. The variety mentioned above is notable for its small dimensions, as well as very economical energy consumption. Thus, the device weighs only 6 kilograms, and the consumption is 370 watts. This equipment is intended for pumping cold water, its temperature should not be higher than 40 degrees. You can use this device to pump water from a depth that reaches 7 meters. Moreover, the equipment can work for a long time without stopping, which is provided by protection against overheating.
If the unit is understaffed with an ejector, then it can easily be used in wells, a water mirror in which is located at a depth of 15 meters. If you are considering the Agidel model, this type of pump can be used to pump exceptionally clean water from pools, wells, artificial reservoirs and wells. If you plan to pump out water from a reservoir or pool, you must ensure that from the inlet valve to the bottom there are more than 0.35 meters. The most impressive water pressure is 20 meters.
Characteristics of the pump brand "Agidel-10"
This equipment differs from the above model in that it is more powerful. This unit consumes 500 watts during operation, but it is able to provide a more impressive head of water, which is 30 meters. Such a device weighs 9 kilograms and acts as a self-priming pump. The equipment does not assume the need to fill water when starting up the system.
If you decide to choose Agidel, a pump of this brand is very reliable, as users note. It can be used to supply water to a residential building. This is due to the fact that the equipment has high power and delivers fluid at once to several points with a normal set. Thus, at the same time, water can enter both the kitchen and the bathroom.
User's manual
The Agidel pump, the characteristics of which will be useful for you to find out before visiting the store, should be installed exclusively on a flat and solid surface. It is from this circumstance that the quality of work in the process of use will depend. It is important to take care of protection against direct ultraviolet radiation, as well as rainfall. Specialists recommend equipping special containers or installing equipment inside the utility room. The first method is preferable, since due to the long hoses and pipes, the water pressure specified in the instructions will be reduced.
Wizard recommendation
The Agidel pump, the characteristics of which are described in the article, is not intended for use in the winter, however, if there is no other option for water supply, it is necessary to find a room in which the temperature will not drop below zero. However, you can use an alternative method, which involves digging a hole. It must be placed below the freezing level of the soil, concreted, and then insulated, placing equipment there.
Additional recommendations for use
The water pump "Agidel" can be installed inside the well itself. This is what some lovers of country rest do. To do this, you will need to build a strong raft of materials that do not interact with the liquid. This approach allows you to artificially increase the height of the suction, but suggests the need to connect to an extension cord. This requirement is due to the fact that the length of the cord will be insufficient to reach the outlet.
It is worth remembering before carrying out installation work that the length of the cord from the pump is only 1.5 meters. The Agidel water pump must be installed so that the connection to the extension cord is carefully isolated from moisture. Installation of equipment must be carried out with mandatory grounding.
Fill before starting
It is necessary to take into account the fact that the connection of the pump of the brand "Agidel-M" involves a preliminary filling with water. This requirement is explained by the fact that dry running can cause breakdown of the whole mechanism. It is important to consider the technology with which you can fill the system with water in the country through a manual column. "Agidel" pumps, the technical characteristics of which allow installation work to be carried out correctly, must be filled before operation. To do this, open the tap, and then lower the hose from the equipment into a container with liquid.
In order to create a vacuum in the well, you need to start pumping the column. Through the pump hose, fluid from the reservoir will begin to flow to the well. This will cause the movement of the air impeller of the equipment. As soon as water flows from the column, it will be possible to start the unit. The scheme of the pump "Agidel-10" does not imply the need for filling. The liquid at the first start should not appear immediately, this will happen within 5 minutes. This distinguishes self-priming systems. It is worth remembering that the higher the liquid level in the well, the faster water will flow.
How to troubleshoot a pump
The kit comes with instructions. The Agidel pump will work properly if you follow the rules prescribed by the manufacturer. If you notice that the water supply is very weak, then the reason for this may be the use of the wrong hose for the intake. If water is sucked in from the well with a rubber device, rarefied air may form , which leads to compression of the walls. This may interfere with the normal flow of fluid. Experts recommend the use of a hose that is reinforced with a plastic spiral.
So, you have purchased the Agidel device. A pump for which you can purchase spare parts from the supplier company will last you a long time. In order to exclude the possibility of an early breakdown, it is necessary to take care of the proper functioning of the equipment. The current repair of the device is associated with the replacement of the seals, since if they fail, then you may encounter a problem of leaks in the drainage hole.
To replace, you will need to unscrew the 3 bolts that are located on the body. The master must remove the casing and unscrew the 4 bolts that are located in the engine. Next, you can remove the motor housing, disconnect the cochlea and remove the bolts. The wizard will need to remove the gasket and unscrew the nut holding the impeller. Then the anchor is removed, which can be helped by a blow of the hammer. After he left the case, it is necessary to find oil seals in the impeller. They are removed so as not to damage the insert between them. At the final stage, you need to install new oil seals that are separated by an insert. Assemble the pump yourself in the reverse order.
Conclusion
The described pumps of the Agidel brand are reliable and high-quality equipment. In order to ensure long-term operation and the possibility of stable pumping of water at any time of the year, you must use the device in accordance with the instructions. However, in addition you will need to lubricate and clean individual parts.
You can do all these manipulations yourself, without resorting to the help of professionals. This helps to save a fairly large amount of money. However, if you faced the need for a serious repair of equipment, then in this case it is best to contact a service center. This will extend the warranty and will not cause a more impressive breakdown, which you may encounter when repairing yourself.