If you want to have a reliable roof, then the technology of laying a soft roof should be carefully observed. To begin with, you should consider its advantages. So, such a roof is very easy to install, has a low weight, does not require the use of additional construction equipment. In addition, it is very resistant to negative influences, durable and easy to repair.
The technology of laying a soft roof provides for preliminary preparation of the base. For example, you need to make a strong crate. It is best if it is solid. Use for this you can
chipboard, OSB or boards, laid with a small gap between them. Naturally, the crate before laying should be treated with an antiseptic and fire fighting agent. On it you need to lay a waterproofing film.
The technology of laying a soft roof advises you to start work from the bottom edge. Joints of the material should be placed so that moisture does not have the opportunity through them to get inside the room. If the roof is not standard, then it is necessary to mount the roof in several layers. Spread the strip should be level, level and without any wrinkles. For fixing it is necessary to use a gas or gas burner. In this way, the entire strip is gradually fused.
This procedure requires maximum accuracy and caution. It is better to practice the deposition in advance, since without a certain experience the material can either be overheated or the surface of the indicator film can be poorly melted. The technology of laying soft roofs provides for the additional filling of particularly complex areas of the roof with mastic.
The overlap of the strips should be about 10 cm. This value can be somewhat larger in the area of the chimney, ridge, ventilation holes. All places where the material adjoins the roof and the joints of the strips should be carefully examined so that in winter the wind could not get under the roof. In addition, he can easily disrupt the poorly laid finish.
The technology of laying the
soft roof "Technonikol" practically does not differ from the above. It must be mounted on a prepared concrete or wooden base. It should be noted that the panel of the presented material is quite large, so do not refuse to help other people. Before laying the roof, you must expand the roll and let it lie down until the sheet is completely leveled. Then it can be twisted back.
Regardless of the type of roofing material presented, it has high quality and reasonable cost. Installation is carried out by the method of deposition of material on the base. The surface is primed in order to provide the strongest adhesion to the finish.
Laying a soft roof, the price of which is not high, will be an excellent alternative to other materials that for one reason or another are not suitable for work. Euroruberoid is a standard of quality, style and convenience.