The convector "Thermia", reviews of which will be presented in the article, is very popular today among consumers. This is due to the fact that such heaters satisfy all medical, environmental and fire requirements. The convector is connected to the network with the help of programming devices, as well as temperature regulators, which allow you to configure operating modes in the desired temperature range.
general description
The convector "Thermia", reviews of which will help you make the right choice, may have different design features. However, the internal heating element, which is enclosed in a decorative case, acts as the main element. The latter is made of stainless steel. The electric convector "Thermia" has one distinctive feature, which is the presence of holes in the body, the upper of which are designed for the release of hot air, while the lower ones for the intake of cold air. In the lower part of the case there is a thermal heating element, which includes a hermetically sealed radiator with a metal tube. Among other things, the design has conductive components. There is a special safety sensor in the unit housing, which is responsible for shutting down the system in the event of an emergency.
Features of use
If you decide to purchase a "Thermia" electric convector, you should read all the reviews. Such equipment has certain disadvantages, expressed in certain operating features. When the device is operating, convection air flows constantly move around the space of the room. This may prevent the room from heating evenly. This is especially true for buildings in which the number of floors is limited by a small number. This includes basements that are not heated.
Selection tips
Electric convector "Thermia" should be selected depending on the material of the body and power. Experts advise you to purchase energy-saving options. The most optimal option is stainless steel or aluminum, which forms the basis of the body. In this case, you can count on a longer service life. Consumers are advised to buy models that are covered by a free warranty service. You may prefer a unit whose warranty will last for 20 years. Consumers have recently increasingly acquired ceramic convectors, the characteristics of which are more impressive compared to metal counterparts.
Characteristics of some varieties of convectors
If you decide to purchase a "Thermia" electric convector, you should read all the reviews. Such equipment has certain disadvantages, expressed in the features of functioning. When the device is operating, convection air flows constantly move around the space of the room. This may prevent the room from heating evenly. This is especially true for buildings in which the number of floors is limited by a small number. This includes basements that are not heated.
Electric convector "Thermia" should be selected depending on the material of the body and power. Experts advise you to purchase energy-saving options. The most optimal option is stainless steel or aluminum, which forms the basis of the body. In this case, you can count on a longer service life. Consumers are advised to buy models that are covered by a free warranty service. You may prefer a unit whose warranty will last for 20 years. Consumers have recently increasingly acquired ceramic convectors, the characteristics of which are more impressive compared to metal counterparts.
Characteristics of some varieties of convectors
Electric convector "Thermia", reviews of which are presented in the article, can be skirting or ordinary. In the first case, the height of the device does not exceed 20 centimeters, while in the second this parameter is not more than 40 centimeters. High electric convectors are more impressive among consumers, as they have more power.
Description of skirting convectors
If you decide to buy a convector electric "Thermia", reviews will help you evaluate its advantages and disadvantages. As for skirting models, their temperature is lower, however, in terms of efficiency, they are not inferior to analogues with more impressive dimensions. With the help of this device, it is possible to achieve a more uniform heating of the room, which results in lower convection air flows. Such heaters heat the lower part of the room better due to the peculiarities of the location. The baseboard convector "Thermia" of the baseboard type EVNA has a length of 2.5 meters. This can lead to difficulties in choosing the location of the units. The upper part of the room will warm up worse due to the peculiarities of the arrangement of the device.
Description of the convector brand EVNA-2.0 / 230 C2 (s)
The electric convector "Thermia" EVNA can be used for heating any dry rooms. A power of 2 kilowatts will be enough to heat a room, the volume of which does not exceed 50 cubic meters. We are talking about the case when the device is used as the main source of heat. If there is a need for additional heating, then such a convector can be used in a room whose volume does not exceed 80 cubic meters. In the role of a heater in such a device, a tape or needle element is used, which has a low resistance and a large heating surface. After switching on, the device instantly enters the operating mode. This ensures that the required indoor temperature is accurately maintained. If saving is important to you, then you should choose similar equipment that meets these requirements.
The main characteristics of the convector EVNA-2.0 / 230 C2 (s)
If you are considering "Thermia" convectors, the price of this equipment should certainly interest you. When choosing the equipment of the above brand, you will have to pay 2600 rubles for the model. The device can be used in one of two modes - 1 kW / 2 kW. The unit is equipped with an electromechanical type thermostat. Before purchasing, you should count on dimensions that are 740 x 450 x 110 millimeters. The device can be installed independently, since its mass is 5.3 kilograms. The body is equipped with brackets in the amount of 2 pieces for mounting on the wall surface. For 5 years, you can count on a manufacturer's warranty.
Extra features
If in the store you paid attention to the Thermia convectors, the price of this equipment should be interesting to you. You may have to pay a price that differs from the above. But installation work in each case will imply the need to comply with a certain technology. On the wall, you will need to make a marking for 4 mounting holes, while it is worth using the circuit shown in the instructions. The master drills holes, and then installs screws in them. By means of brackets, the convector is hung on the wall. If necessary, the equipment can be installed on legs without wheels or with wheels, but they are not included in the package of delivery.
The equipment is equipped with a temperature regulator that prevents freezing of the room due to the presence of an automatic temperature maintenance system at a minimum level within +7 degrees. Legs for the “Thermia” convector will allow you to position the device in the right one, moving the unit if necessary.
Reviews
The convector "Thermia", reviews about which you should certainly help when choosing heating equipment, has many positive features. This is supported by the opinions of consumers who for a long time use the described units in their homes and offices. Among the positive characteristics, it can be distinguished that the device does not contribute to the burning of oxygen, the air does not dry out, the humidity in the room remains unchanged. Consumers also like the fact that the temperature of the outer surface of the case does not exceed 65 degrees during operation, this makes the device completely safe for adults and children. The “Thermia” convector, reviews of which you should read before you visit the store, can be operated even in rooms with high humidity conditions. Buyers especially emphasize that the unit is equipped with an autonomous power supply system, which indicates the possibility of uninterrupted operation even when the power supply is cut off. Reviews are advised to choose equipment that is equipped with a special thermostat. However, the device will cost a little more. The importance of the thermostat is difficult to overestimate, among other things, there is the possibility of installing a thermostat for a group of convectors, if they are located inside the same room. As a modern consumer emphasizes, electric convectors, which include a special thermostat, are a profitable and convenient acquisition for operation.