If you decide to start arranging a metal roof made of metal tile or corrugated board, then there will be a need to use many elements in the work, among them you can highlight the wind bar. It will be required in order to protect the ramp from precipitation, which can get into the side joints. Among other things, the wind bar for decking is used to decorate the roof.
Need to use
Installation of the described element is the final procedure during the arrangement of the roof. A similar part is simply necessary if the master plans to install spotlights. A sufficiently strong side wind can damage the edges of the roofing material, as well as tear it off the roof. This is especially true for regions characterized by an unfavorable climate. The wind bar for corrugated board is able to reduce the impact of air masses. Among other things, it is designed to prevent the effects of wind on the crate system. The life span of a roof depends on how much its elements are protected from water. Before making a purchase, you need to familiarize yourself with the assortment presented in stores, since the wind bar for corrugated board is divided into several types, which depends on the features of use.
Main varieties
The described element should cover all the edges of the roof around the perimeter. To do this, use different types of the mentioned elements. As for the gable or end plate, it is intended to protect the ramp from precipitation from the side parts. Installation is made on the edges of the ramp. The ridge element is used to protect the gap that is at the junction of the roof slopes. The cornice strip is installed in front of the drains at the edges. Among other things, the wind bar for corrugated board can be made of different materials. For example, for a metal tile or corrugated board, elements made of metal are used. Composite tiles require the use of parts that have the appropriate spraying.
Bar dimensions
The wind bar for corrugated board, the photo of which is presented in the article, is made according to standard sizes. They assume a length of two meters. Before purchasing, you should consider the usable area of the part. This parameter is 1.9 meters. As for the width, it can be very different, so experts recommend choosing it, taking into account the existing roof parameters. The standard dimensions of such planks are 9 x 15, as well as 4 x 6. If you have to work with a flat roof, you need to purchase narrow planks. For example, they are perfect for a garage roof that doesn't have a wave.
Installation
Installation of a wind strip for corrugated board involves fixing to the crate. Such manipulations must be carried out from the end. Installation work should be carried out using special bolt screws. They should be 40 cm apart. Begin work from the bottom of the roof, laying building material with an overlap whose width is 10 cm. This is required so that the element can fulfill the task of the stiffener.
Professional recommendation
After you know the size of the wind bar for corrugated board, you can begin to purchase this element. However, it is important to familiarize yourself with the theoretical part of this issue. It is important to choose trims that have the same size. If you use elements of different dimensions on the same plane of the roof, the structure will not be able to resist physical influences. The part must be fixed to the side of the roof using self-tapping screws, which were discussed above. In some cases, screws are used, and even less traditional rivets are used. If you will use the wind bar for corrugated board, how to fix this element, it is important to know before the start of work. Installation and alignment is done at the end, while it is important to ensure perpendicularity with respect to the roof.
The nuances of the work
The implementation of the installation of the bar should not cause difficulties even for the master who does not have sufficient experience in carrying out these manipulations. After you installed the first element, you can proceed to the installation of the second, which is overlapped. Before the last part is fixed, it should be cut to size. Works where the soft roof acts as the basis will not be any different from the installation using metal tiles as the roofing. However, installation should be started only after the system is supplemented by a drain.
What is important for the master to know
At the edges of the plane of the planks, plugs should be installed, which must be purchased in advance. Their installation is carried out using 4 screws located around the perimeter. In conclusion, the installation will have to process all the joints with the help of special substances. This is required to protect the finished structure from corrosion processes. During the work, it will not be possible to exclude the formation of seams, which experts recommend treating with sealant. After the fastening of the wind plate for the corrugated board was completed, and you managed to carry out the sealant treatment, you can cover the surface with a layer of paint.
On this we can assume that the manipulation was completed successfully.
Wind bar cost
The price of the bar for corrugated board may be different, it will depend on the purpose of the element, as well as its dimensions. If we are talking about a narrow model, then it will cost the buyer 160 rubles, if there is a need to buy a wide variety, then you have to pay 300 rubles. If you will be installing the wind bar for corrugated board, then you may be able to find the described part at a different cost. For example, in some stores you can find additional elements that were produced in Finnish factories. In this case, the cost of the bar will be more than 30%. If you want to save, then you should choose parts of a domestic manufacturer, they are rarely more expensive.
Conclusion
Any home craftsman can fix the wind bars, if you manage to do the work yourself, you can save a decent amount on the expensive services of a professional team of craftsmen.