Very often, those people who personally own dachas, gardens, are faced with the need to care for the lawn on the site. In such cases, you just can not do without the usual hand braid or trimmer. The first is slowly fading into the background, and the people who use it are becoming smaller. The trimmer works automatically and does not require much effort. Moreover, there is no need for a special skill to use it.
How does the trimmer work?
The principle of operation of such a device is that the grass is mowed by a special fishing line mounted on a rapidly rotating head. The number of revolutions per minute can reach 8000. For a short time, the fishing line becomes unusable, or rather, it is erased. Then the summer residents the question arises: "How to fill the fishing line into the trimmer coil"?
Types of woods for trimmer
First of all, in order not to resort to frequent replacements, it is better to use a denser fishing line. The number of its types and manufacturers is simply amazing. The main parameter of the fishing line for the trimmer is its diameter. It varies from 1.6 to 3.2 mm. The most common type is a 2 mm fishing line. However, it must be selected depending on the type of trimmer you have.
There are several options for the cross-section of the line. So, it can be round, square, in the form of an asterisk with sharp edges. The most effective is the last option. However, it should be used only on powerful braids and you need to know how to fill the fishing line into the trimmer coil. Therefore, we can conclude that the more powerful your motokosa, the fishing line should be thicker.
Such a process as winding fishing line on a trimmer is not complicated, but has its own characteristics. First you need to choose the right fishing line, the diameter of which is registered in the passport of the device.
To begin, unscrew the cover of the coil. Be careful, as the thread can be left and right. The left-hand thread is necessary so that the braid head does not unwind during operation.
Refueling the fishing line with a trimmer
Before filling the fishing line into the trimmer coil, measure 5 m from the skein (as many fishing lines are installed on the trimmers on average). Then fold it exactly in half to find the middle. The resulting center must be inserted into a special slot, which is located on the coil. After that, wind the fishing line in the direction of the arrow that is on the head.
There are such models in which the place of winding is divided into two halves. Therefore, one is often wound clockwise, and the second against. After winding the fishing line completely, its ends are threaded into special holes. The cap is put on top of the head.
From the above it follows that the process of replacing the fishing line itself is not complicated. Having performed such a manipulation as winding fishing line on a trimmer reel several times, you will bring this process to automaticity. The only thing is to constantly monitor the condition of the fishing line, in order to avoid its rupture at the time of work on the site, when the spare skein may not be at hand.
Now you know how to fill the fishing line into the coil of the trimmer, and you can do it yourself without much effort!