After buying and connecting a washing machine, it happens that the new unit does not please its owner at all, but instead, for some reason, “jumps” throughout the bathroom. An inexperienced person in the matter of installing household appliances will not immediately understand what is the matter and decide that he has acquired a defective household appliance. A specialist, however, will necessarily state not even one, but several reasons for this phenomenon, and, as a rule, the machine itself has nothing to do with it.
Causes of increased vibration of the washing machine
As a rule, any problems associated with increased vibration of the machine, one way or another, are a consequence of the fact that the washing machine was installed with errors. And errors can be different. Before buying anti-vibration stands for the washing machine, you must exclude them.
Installation bolts did not remove
Firstly, the reason that the spin and vibration of the washing machine are such that it moves from its place, turns around, or even literally “jumps” across the floor, may be because the installers simply did not remove the transport bolts. Any professional knows that this is necessary. In the event that the user of the machine installs it independently, this must be indicated in the instructions for installation and operation of the device. Nevertheless, sometimes this moment is still overlooked, and then the machine refuses to work normally: it is shaken in the spin cycle so that ignoring this fact will not work. You just need to unscrew the transportation bolts - and everything will return to normal.
Incorrect level setting
The second most likely cause of excessive vibration is that the installation of the washing machine is uneven. Stands for the legs of the washing machine will not help here - in this case, it is more likely that their regulation or alignment of the actual surface on which the equipment is standing is required. The regulation of the legs is an elementary operation. The main thing is to understand in which direction the instrument roll is going, and increase the height of this leg with the help of a fixing nut. If the machine is stable and does not stagger, then the legs do not need to be adjusted, and the matter is about floor defects. Needless to say, in most apartments this is a common problem. Even if the washing machine is installed at a building level, a roughness or pothole on the floor can lead to the fact that in the process of work, slightly shifted, the machine falls into this unevenness with the foot. Then the vibration level rises greatly: the "washing machine" begins to shake, objects standing on it fall from it, and sometimes it starts to knock on the wall. This cannot be left this way; you need to stop the program and return the device to its place.
Which surface should the washing machine be installed on?
By the way, the requirements for the surface on which it is permissible to install such household appliances are extremely simple and logical: it should not be uneven, it must be solid and clean. It is desirable that the base is concrete - it is not recommended to put the machine on a wooden floor. You may need anti-vibration stands for the washing machine, but if all the recommendations are followed, most likely, problems with excessive vibration of the washing machine should not arise. It is also worth mentioning that sometimes a car that has served without any complaints for several years suddenly starts to shake very violently in the spin cycle, all other things being equal. Perhaps, in this case, the problem is really in the device itself, and the bearing is worn out. Here you can’t do without a master, and if the problem is really in this detail, you need to replace it, which is also only possible for a specialist.
When a washing machine stand is needed
I must say that even if the surface is quite smooth and the washing machine is quite stable, it may still seem to its users that the vibration and noise during operation are excessive. For such cases, anti-vibration stands for the washing machine are needed. This is absolutely normal when certain models of washing machines vibrate somewhat more strongly than others. Internal anti-vibration systems of washing machines rarely fail, just each machine model has its own vibration level, and if it does not suit you, shock-absorbing stands for washing machines will help save the situation. They partially dampen the vibrations of household appliances, reduce noise, prevent the unit from sliding on the ceramic tiles in the bathroom and protect it from scratches. And in the end, the stands for the legs of the washing machine will extend the life of the device, because with very strong vibration damage to the washing machine is possible.
By the way, narrow washing machines are the most vibrant . They are compact, and this is their undoubted advantage, but that is why they are less stable. In addition, in the narrow drums of washing machines, laundry often gets lumpy, so imbalance occurs, and the machine shakes more than usual on the spin. And sometimes even in this case the spin does not turn on at all, and you have to stop the program, pull out and straighten the laundry. It is in the case of a narrow model that the stand for the washing machine will be most welcome.
What are the coasters
Anti-vibration stands for the washing machine are special rubber, silicone or polyurethane linings that are installed under each leg of the household appliance. The surface of such supports is embossed from above, which allows the legs of the washing machine to stand stably in them, and from the bottom they are equipped with stiffeners for greater damping efficiency. The color is usually white or black, transparent models are found. Stands are universal in size: they are usually designed for the diameter of the legs up to 4.5 cm. But their shape can be different: round, square or in the form of “paws”. However, nobody will especially appreciate their shape, the main thing is efficiency.
Many manufacturers of household appliances produce coasters for washing machines. It is not necessary to select them under the brand of the machine. Topperr anti-vibration stands are quite suitable, and you can put on them not only washing machines, but also refrigerators. Featuring affordability, these coasters are made of high quality and durable material and have a conical shape. With them, the washing machine will be reliably protected from excessive vibration, and the floor covering will be protected from scratches and dents.
Anti-vibration washing machine mat
Also, accessories for such a household appliance can be made not as separate linings, but as a whole rug. It is made of rubber and provides particularly reliable stability to the machine. On the rug there may be additional cushioning pads in the corners. Such models absorb vibration very well and reduce noise. Rugs are slightly more expensive than coasters, but in any case, these accessories will be inexpensive.
conclusions
Is it worth using anti-vibration stands? Depends on the specific case. It is imperative that you purchase and install such pads before making sure that increased vibration and frightening noise during operation of the washing machine are not associated with improper installation. If all errors are excluded, but you still would like the spinning machine to work softer and quieter - well, then you can purchase these additional devices.