When you want to do something unusual, start by changing the image. At the same time, it is not necessary to do an extreme haircut, to shave baldly or to acquire clothes of a flashy color. In order to please yourself and bring something new to the image, it is enough to change at least one small detail in the wardrobe. Let it be even such an insignificant trifle as lacing sneakers. Is it realistic to make her beautiful? And what are the options for modern lacing today relevant? Let's talk about this in the article.
The easiest and most famous lacing option
Who would have thought that the classic lacing of sneakers would attract so much attention and not only ordinary teenagers, but also famous politicians, celebrities, and other popular personalities would be interested in it. It is not known who exactly came up with the schemes for these “lace tricks”, only one thing is clear - despite the passing years, they do not lose their former popularity even for a minute.
So, the simplest, but at the same time no less original, is the classic or traditional way of lacing sneakers. It is performed very simply and involves crossing the lace along its entire length. The main advantage of such a lacing is the simplicity of its execution. Moreover, it is performed on the upper part of the shoe, therefore, does not interfere with the movement and does not rub the skin.
How to lace up shoes in European
In Europe, another beautiful lacing of sneakers is common, involving the passage of the lace through two holes at once. A similar original lacing is performed according to the following scheme:
- Take the lace and run it through the bottom holes on the shoe.
- Pull the ends of the lace out.
- Take one end of the lace and insert it into the next upper hole of the shoe on the opposite side (as in the case of classic lace-up crosswise).
- Take the second end of the lace and instead of the next hole on the other side, enter it through one.
- Go back to the first end and pull it into the next hole (you should get a stitch parallel to the lowest).
- Repeat the same with the second end.
- Proceed in the same way, alternately using both ends.
As a result, two patterns should be obtained: in the front, all the stitches will be even, and in the back they will remind a kind of zigzag ladder. Here we have such a beautiful lacing of sneakers. To be honest, doing it is far from as easy as it seems, but with regular practice it is not difficult to fix it.
How to make a straight or rectangular lacing
Among athletes and fitness enthusiasts, a straight or rectangular type of lacing of sneakers is common. During this weaving, straight stitches arise, each of which is above each other. To perform lacing, you must perform the following steps:
- Pass the lace through the lowest holes (in this case, the stitch will be on the top, not the bottom).
- Take the end of one part of the lace and lift it up to the right.
- Pull this tail out of the hole and thread it into the adjacent hole on the left.
- Do the same by analogy, but with the other end and the opposite side.
- Weave both ends of the lace, moving up the shoes (it is worth acting through one hole).
- Lace up the rest of the product to the very top.
- The last remaining part of the lace must be removed through the upper hole.
Despite the apparent complexity, such lacing of sneakers is quite fast. The main thing is dexterity. It gives the shoe a neat and stylish look, but is suitable exclusively for models with an even number of holes.
How to lace up with a knot
If you need a cool lacing of sneakers, try to perform a similar straight previous lacing, but with a small addition in the form of a spectacular knot. As practice shows, such an unusual hidden knot gives shoes a special appeal. So, how is this lacing option done?
To get started, grab the cord and thread it into the bottom holes. However, on the left side, the lace should be made a little shorter than at the end on the right. Repeat the weaving of the previous straight lacing, but with some innovations. In this case, the left end of the lace should not be fully laced, and the right should be finished to the very end.
At the end of weaving, the lacing of the sneakers should resemble a ladder. In this case, the ends of the lace must be hidden inside the shoe. Next, you need to tie them to a kind of knot and slightly tighten. It is this knot that can decorate the classic European lacing.
If we talk about the disadvantages of this method of tying shoelaces, we note a little discomfort that this knot causes when walking. It is possible to smooth out its effect slightly if you tie it not on the front, but on the outside of the leg. This option is suitable for shoes with an even number of holes. For example, out of 7 pairs of holes, only six should be laced. It turns out a very original lacing of sneakers. A photo of this weaving clearly shows the resulting pattern.
How to lace up gym shoes in a sawtooth way
To emphasize your individuality, use non-standard options for lacing sneakers. One of these methods is "sawtooth" lacing. To start this weaving, you need to from the lowest rings. It is in them that it is necessary to introduce a lace, but it is mandatory in the direction from the outside to the inside.
In the process, make sure that one side of the lace moves in the horizontal direction and intersects all the free rings in the direction of travel. And the second part of the lace should move obliquely, but with the passage of one free hole.
Perform this unusual lacing of the sneakers, using both parts of the lace alternately. And continue to thread the cord through the holes until you have run out of one of its parts. Then fix both ends and tightly tie. If desired, the zigzag part of the weaving is quite realistic to let both the right and left sides.
How to decorate sneakers with a "lattice"
If you often wear athletic shoes, use fashionable lacing for sneakers like the grille for her. This option looks pretty attractive on sneakers and sneakers of any height. In simple terms, this pattern involves the phased twisting of the laces at a right angle. Ultimately, all parts of the lace will create a spectacular mesh that resembles a lattice.
How to weave a lattice pattern
However, such an original way of lacing is suitable only for that shoe on which there are six or more free holes. This weaving starts from the bottom. First, lace is threaded into the lower holes. Then the part that is on the left is threaded into the fourth hole from the top. After that, the tail received from the lace is moved along the inside of the shoe and threaded into the second hole from the bottom (go back).
Further, the lace is thrown to the opposite side and threaded from above into the fifth hole (we count from the very bottom). On the inside of the shoe we return the lace and thread it into the third hole from the bottom. We take out the lace from it and put it on top of the previous oblique stitch, introducing it into the last upper hole from the inside out. By analogy, weaving is performed on the opposite side. The ends of the laces are connected to each other on a bow or knot (optional).
What lacing is suitable for high sneakers
If you have high top sneakers, it is worth emphasizing their beauty with an unusual lacing. For example, “butterfly” weaving is suitable for this, meaning crossing the lace from the outside, as well as pulling it from the inside of the shoe. The principle of weaving "butterfly" is as follows:
- Pass the lace from the bottom and align it on both sides.
- Take both ends of equal value inward.
- Pull the lace in the vertical direction to the next pair of holes and form a kind of space in the weave.
- Take the ends of the lace, crossing them together.
- Slip the ends into another pair of holes.
- Move higher by crossing and skipping holes.
The result is a pretty nice pattern for high sneakers or even boots with laces.
How to make fun nodal pattern on sneakers
If you want to do something interesting, lace up using decorative knots. These are usually used on skates or ski boots. You can make such a pattern by observing the following procedure:
- Enter the lace on the inside of the shoe.
- Pull the ends of the lace out.
- Connect the ends together and tie to a knot.
- Bring the ends of the lace under the following holes and bring them out.
- Weave and tie knots at each intersection of the ends until you have run out of laces.
In the end, you get a nice lacing with single knots in the middle.
Bright and original chess-style lacing
One of the most stunning lacing is considered to be that which is performed in a unique chess style. In order to do this sequence, follow these instructions:
- Take two pairs of wide colored shoelaces.
- Using one color, do a straight lacing.
- Using the second color, begin to create a wave-like pattern, moving in the direction from bottom to top.
- Wrap the second string first and lace up to the bottom.
- Lock the ends of the laces and thread them inwards.
Such weaving looks very stylish and original. However, it does not pull the weave as well as we would like. As a result, it is suitable exclusively for those sneakers or sneakers that can be worn without tying shoelaces.
Double back lacing
If you like to experiment, then you will definitely like the multi-colored double lacing with a reverse pattern. It is interesting that in this case, not only the weaving itself looks spectacular, but also allows you to create an additional element from the ends of the lace in the form of a large bow.
For work, you need two pairs of laces of different colors. Start weaving in one color by threading the lace through the lowest holes on the shoe. Next, turn the work cord crosswise and, having passed a couple of holes, enter the free ends into the following holes. Move higher. And do not forget to skip one pair of holes at a time.
At the second stage, take a different color of the lace and follow a similar path, but start moving from the second pair of holes (they should remain free without the previous lace). When the ends of one lace coincide with the other, they can be knitted into a large and effective bow. The result is a very unusual, bright and beautiful weaving. It is perfect not only for low sneakers and sneakers, but also for high boots and other sports shoes.
Some tips for beginners
If you have never used different types of weave, please be patient. It's like a child who, for the first time in his life, decided to learn how to tie shoelaces. Be prepared for the fact that a beautiful pattern will turn out far from immediately.
The second important point is to follow the instructions. Look at the photo and follow the sequence that is indicated in the instructions for weaving. With each stitch, try to align the ends of the lace and keep them with your free fingers so that they do not interfere or get tangled.
When using two-color shoelaces, pay attention to the combination of selected shades. For example, red goes well with white, black and even orange. Blue - with snow-white, pale blue, emerald and purple. Pink - with red or white.
Tighten the lacing slightly during operation and tighten if necessary. Otherwise, you run the risk of getting too loose shoes that will fall off your feet.