The manufacturer of construction and industrial equipment Fubag is well known in the Russian market for high-quality welding machines. The company's developers use the latest technology in creating products, focusing on the requirements for convenience, safety and efficiency of the workflow according to the standards of the TUV-CERT system. These qualities correspond to the welding machine "Fubag-160", the photo of which is presented below. This model is also good for its versatility. Its operational properties make it possible to cover a wide list of common standard operations both in the professional sphere and in everyday life.
Main characteristics
The device is an inverter equipment for the formation of permanent connections. Despite its modest dimensions, the model is quite functional by the standards of its class, and with proper training of the operator, it can carry out quite responsible operations in production and as part of responsible installation work at the construction site. These operating capabilities are also confirmed by the characteristics of the Fubag-160 welding machine:
- dimensions - 300x120x195 mm;
- the diameter of the electrode allowed for welding is from 1.6 to 4 mm;
- weight - 3.04 kg;
- voltage - 220 W;
- input voltage - up to 150 V;
- maximum power - 6.4 kW;
- maximum current strength - 160 A;
- duration of inclusion at peak load - 40%;
- protection class - IP21S.
Features of IR and IQ Versions
Immediately emphasize that the basic model is IR, the characteristics of which are presented above. According to the nominal parameters, there are few differences between the modifications. For example, the IQ apparatus has a lower power reserve of 4.6 kW, as well as an increased lower threshold for current strength up to 20 A. The maximum current strength is the same and amounts to 160 A. The fundamental difference is, rather, in terms of ergonomic qualities.
The standard version of the “Fubag” welding machine of the IR series is characterized by a wide set of equipment, a traditional form factor and control familiar to inverter equipment. The segment in which the model is presented focuses more on amateurs, therefore the controls with protection systems are more understandable and ergonomic. IQ modification can be called a lightweight equipment option. And in the most literal sense - 3.04 kg versus 2.7 kg. There are some structural differences, the significance of which will be manifested in the practice of using devices.
The functionality of the welding machine "Fubag-160"
The model has many competitors in the market, as the segment is popular and covers a wide audience of consumers. But among most analogs, this inverter stands out with an expanded set of additional functions, including the following:
- Anti sticking. During the welding process, masters often encounter the problem of disconnecting the electrode from the work surface without damaging the coatings in the form of a coating. This option just facilitates this operation.
- Hot start. By activating this function, you can reach high welding currents right at the moment the wire touches the product.
- Arc Force When the electrode sticks, the Fubag welding machines with this function allow drops to come off the electrode with a short-term increase in current strength. As a result, the transfer of the melt along the arc gap is more uniform and accurate.
The welding machine is easy to operate, safe, reliable.
Working conditions
The design of the apparatus provides for the presence of indicators by which it is possible to monitor its condition during the welding process. In particular, green light indicates sufficient power, and yellow is responsible for thermal protection. To initially minimize the negative factors affecting the equipment, it will not be superfluous to initially assess the situation at the workplace. So, the temperature can vary from -10 to +40 ° . Transportation and storage of the device is organized at modes from -25 to +55 ° C.
Humidity is also capable of influencing the quality of the Fubag welding machine. The optimal coefficient for this indicator varies from 50 to 90%. It will depend on temperature. Accordingly, the warmer the air, the lower the permissible level of relative humidity may be. In addition, there should be no dirt, dust and acidic substances in the workplace. As for energy supply, the instruction allows for small deviations in voltage, but to obtain a high-quality connection, it is better to provide a stable single-phase source of 220 V.
Maintenance Instructions
Regularly check the integrity of the case, the condition of the functional organs, the purity of the ventilation ducts and much more. Most malfunctions, such as weak voltage, lack of power, or overheating, occur due to disturbances in the wiring. In such cases, the manufacturer recommends checking the cable cross-section, insulation reliability and correct connection to third-party equipment. As a preventive measure, you should also clean the connectors of the Fubag-160 welding machine. Damage to power capacitors can also occur due to prolonged downtime of the equipment, after which the user starts working at high loads. In such situations, there is a risk that the device will not turn on at all. You can fix the problem by recharging the capacitors or restarting the equipment.
User reviews about the model
The inverter is appreciated for the combination of compact size, high quality components and functionality. As a universal tool for welding standard joints, the model shows itself with dignity both indoors and outdoors. The minimum amount of sludge and the provision of a dense, durable seam are noted. Criticism mainly relates to the ergonomics of the Fubag-160 welding machine. Reviews indicate short wires, the absence of clamps for them and not the most convenient strap for carrying. That is, the design itself is quite comfortable to use, but the accessories turned out to be insufficiently thought out.
Finally
In terms of working qualities, the tool can be attributed to the initial level, which belongs to a semi-professional group. In any case, this is confirmed by a current strength of 160 A and an average power of 5-6 kW. But at the same time, the Fubag welding machine does not look like competitors' products due to the presence of advanced technologies and electrical reliability. Of course, manufacturers of the same class contain similar devices in their lines, but their cost, as a rule, is higher. Models from Fubag of this series are estimated at an average of 4-6 thousand rubles, depending on the version. What is important, the manufacturer in the basic sets offers good sets of optional accessories. Perhaps this explains the low quality of accessories.