In the segment of electronic metal detectors, the X-Terra family from Minelab is firmly occupying, if not leading, then one of the leading places. The manufacturer seeks to maintain its models in basic qualities, and is actively developing new technological solutions. In this regard, the modification of the X-Terra 305, although it is not breakthrough and revolutionary, but it demonstrates an example of an organic combination of the main operational parameters. The detector is lightweight, has extensive settings and an ergonomic control system.
Model Overview
The detector is a continuation of the concept, once embedded in the modification of the X-Terra T34. However, the new version has little in common with the previous generation, differing in both functionality and workability. The device operates at two frequencies - lower and upper. The first, at 7.5 kHz, allows the user to scan the soil at great depths, and the second frequency point, at 18.7 kHz, manifests itself more efficiently closer to the surface, but works better with the search for small objects. The Minelab X-Terra 305 metal detector is distinguished by the VFLEX anti-jamming system, which, however, is equipped with all the representatives of the new generation line. The presence of this function not only eliminates interference, but also increases the detector's ability to recognize metals. A wide range of settings for depth and sensitivity should also be added to this feature. Properly using the adjustment settings, the user can significantly increase the chances of success.
Assembly instruction X-Terra 305
The assembly process begins with a coil, which is attached to the end of the rod. First of all, you should assemble two parts of the functional ring, and then bring it through a special connector with a holder. Fastening to the rod is carried out by means of a plastic screw and complete plugs. Next, connect the end of the rod to the coil and the second part of the holder. This is done through a screw at the end of the second part of the boom. It must be loosened, and then the second segment with the coil inserted into the hole and re-secured. After installing the armrest with screws, you can mount the X-Terra 305 detector control unit. The instruction indicates that this component must be fixed through a special hole on the handle located at the top. Block setting is done with little effort until it clicks. It is important to note that the display must face the top during installation.
User's manual
Before using the detector, you must configure it. To simplify this stage, you can resort to automatic adjustment, in which the device independently made optimal adjustments to the search modes based on a given target. But experts still recommend more frequent referring to more detailed manual settings. Thus, for example, it is possible to make adjustment on the ground with the device detuned from soil interference. In any case, the user must indicate through the menu the search tasks that he will focus on. Then you can proceed to the direct operation of the X-Terra 305, after making sure that the charge of the power supply unit is complete. During the search process, gently hold the device through a special handle, resting your hand on the armrest. Movements should be made from side to side - so that each new passage slightly covers the previous line. In this case, the coil should always be parallel to the surface of the earth.
Positive detector reviews
Owners of the model, first of all, note a rich set of options and in themselves the possibilities of searching at great depths with effective detuning. To this, many add an ergonomic menu with a liquid crystal display, which conveniently displays all the necessary information about the operation of the detector. Again, with regard to operational properties, the device surprised many at the modern level by the implemented volume control, frequency change and tone mode. The external performance of the X-Terra 305 is also noteworthy. Reviews indicate the lightness of the design and the comfort of handling it, although previous versions did not cause any particular problems in such aspects. The result is an ergonomic, economical in terms of energy consumption and at the same time productive metal detector.
Negative reviews
Still, the device belongs, if not to the budget today, then at least to the average level of metal detectors. Some flaws noted by the owners of the device inevitably follow from this. In particular, the model is criticized for the lack of reliability of the mounts. It has already been noted that at the junction of the individual parts, plastic elements are used and this solution is doubtful for many users. In addition, the X-Terra 305 metal detector is provided with rather weak collet latches, which can fail at a crucial moment. But otherwise, there are almost no complaints about the reliability of the structural device of this model. The manufacturer mainly uses high-quality elemental base, which prevents the risk of serious equipment breakdowns.
Conclusion
In the initial class of metal detectors, there are many devices with similar capabilities. Even in terms of price, the Minelab development has many competitors provided with similar functionality. However, this version is distinguished precisely by the effective manifestation of their abilities in practical use. Already in the process of searching, the advantages of protection against interference, the advantages of the detuning installation, as well as the rich settings in terms of designating the target material are noted. Of course, it cannot be said that the X-Terra 305 is the best choice in its class, but in some respects its separation is obvious. For example, it is worth noting the convenience of assembly. The kit itself is quite lightweight, which allows it to be transported without problems. The user only needs to decide on the objects to be searched and in the device settings make the necessary adjustments adjusted for the operating conditions.