Making a gift is of great importance. A beautifully wrapped box with a lush or original bow produces a good effect. In the article we will present several options for how to tie a bow on a box in various ways. To do this, you need to purchase a satin ribbon in a hardware store and wrapping paper in stationery.
There are many options for decorating a gift. This is the simplest single bow, a bow with two rings, a lush multilayer. You can make a flower or ball separately from ribbons and then enter it into the binding already finished. You will also need templates from dense material and scissors for this. Some people just plant such a finished flower on scotch tape in the middle of the lid without tying the box itself.
The tape is used in completely different widths. It can be very thin - 5 mm, or you can take it wider - 5 cm. It all depends on the creative idea of the author. If this is your first time trying yourself in this simple art, then see how to tie a bow on a box in the easiest way.
Plain Single Bow
The design of such a bow begins with the launch of the ribbon under the bottom of the box. From the top in the center or with a lateral shift, both ends intersect, and the long edge of the tape is once again held under the bottom of the box, but in a vertical position. Then, at the intersection of the two ends, a knot is tied. It remains only to make a simple bow, like on shoelaces.
With this method, there will be no knot on the bottom of the box, the ribbons are located exactly so that the gift will have a solid base. The edges of satin ribbons can be cut in different ways: bevel, corner, evenly. It is advisable to singe them with a lighter or a candle so that the tape does not split.
Lush bow
Let's look at another way to tie a bow on a box. The tape is divided into two parts. From one is a gift strapping. The tape is held under the bottom of the box and knotted in the center. Further work begins on laying another piece. To make the bow luxuriant, you need to fold the ribbon in coils one on top of the other, as in photograph number 3. Then this bundle is woven into a knot. To do this, they put it in the center of the box and tied the ends of the first tape.
The more turns, the more magnificent is the finished decoration. It remains only to spread each ring with your fingers and turn it around so that they are arranged in a circle.
Such a magnificent bow will turn out only from a soft and thin ribbon, if the material is more dense, then it will puff up and the knot will be rough and thick. This can be avoided if you know how to tie a bow on a box in the following way.
Stitching individual items
This jewelry is made separately. Subsequently, it can either be glued to the box using adhesive tape, or tied into a ribbon in a finished form. Such a flower is made of several strips of different lengths. Since the coils are sewn in pairs, you need to prepare two long segments for the lower part, two middle and two short ones for the design of the middle. Let's look at how to tie a satin ribbon bow.
1. Prepare segments of the desired length. The shortest is the middle, it is presented in a single copy.
2. From each segment, you need to collapse the figure eight and sew the middle with a stitch.
3. Identical eights folded perpendicular to each other and sew together. Cross-shaped blanks are obtained.
4 - 5. All parts are fastened together. Below - the largest, then - medium size, above - the smallest. In the middle is inserted a part represented by a simple ring. Place it with a seam down so that it is not visible.
6. The result was a lush and durable bow. You can make it from any material, even from dense rep or velvet.
Paper version
From a special paper packing tape you can make a beautiful composition. To do this, you will need a template and sharp scissors. Instead of a template, you can make several turns around the palm. Then it is folded in half and cut off on one side from two sides, as in the photo below. This is done so that the central node is not thick. The ribbon is turned so that the sections are in the center, and tied with a thin strip. We look further on how to tie a beautiful ribbon bow.
It remains only to smoothly turn all the turns and deploy them in all directions. This is done so that they are distributed throughout the circle. At the end, the bow is attached to the gift box or knitted into the interweaving of stripes around the box.
Several similar options
Now you know how to tie a beautiful ribbon bow. But you can differently design the edges of a lush flower, and it will look more original.
1. A lush paper bow is made, described in the last section. Next, you need to cut each round of the ringlet with scissors in half. If you look at the red sample, then all the edges are cut by corners, forming the petals of an aster.
2. The second version of pink in the photo has rounded edges with a recess in the middle. To do this, each end of the tape was folded in half and a corner was cut from one side and the other.
3. The flower looks pale green. Before you tie a bow on a gift, each turn of it in the middle of the ringlet is cut into several parts by the ends of the scissors, depending on the width of the ribbon. It turns out a chrysanthemum, which looks very impressive on gift wrapping.
You can come up with your own method of notching the edges. It will be the most unique design decision.
Original decoration
How to tie a satin ribbon bow ? It is simple, and this method looks unusual. After all, the bow is horizontal. You can do it by different methods. The first option is to correctly fold the tape in turns, from the largest to the smallest in the center. It is better that the bow does not creep into pieces, fasten it with glue or grab it with stitches.
The second option is to make a composition of individual elements by gluing together pieces of different lengths folded in half. In the central turn, insert a separately cut piece of strip and tie a bow nicely. A larger number of turns can be cut from a satin ribbon, then it will be more magnificent. A matter of taste and quality of the material.
Multi-element composition
Gift wrapping made of several ribbons of different quality and color looks beautiful. Consider the option of making a bow. Two pieces are cut from a satin ribbon, wide and narrow. For a change in the creation of the product, you can include an element from another material, as in the photo below. Then, three bows are sewn separately in descending order.
Then you need to attach the finished bow to the package.
In the article we introduced you to the various basic options for tying bows. These skills will be useful not only to those who don’t know how to arrange gifts in a box or bag, but also to mothers who want to learn how to tie a bow to their daughter’s dress beautifully. So try, and maybe come up with your own way, the most unique and original. After all, this is a creative and interesting process.