Ceramic tile today is one of the most common finishing materials, because it has practicality, durability and attractive appearance. It can be used in almost any room, combining with other materials. In addition, it is not such an expensive solution. But if you want to save even more, you can resort to self-laying tiles, giving up professional help. To carry out this kind of work, you need certain skills and tools, the last of which is a tile cutter. This device is the simplest and necessary in working with such a cladding.
Right choice
When choosing a tile cutter, a lot depends on the quality characteristics of the tile, so you need to get it first, and then proceed to the selection of a cutting tool. First of all, it is important to pay attention to the manufacturer, who must have a positive reputation in the market for relevant products. Sigma tile cutter, for example, today is a fairly common tool among consumers. It will be discussed below, or rather, about some models of this manufacturer, having familiarized with which, you can make your choice.
Description of manual tile cutter Sigma 2G SERIE 3
The Sigma 2G SERIE 3 tile cutter is a manual model that is capable of providing cutting heights and lengths between 15 mm and 37 cm, respectively. The manufacturer supplied the tool with a movable separator, as well as a roller cutter, the diameter of which can vary from 6 to 12 mm. This model is quite light and compact and is designed for cutting "on their own." This allows the master to make clear movements, making the cutting more accurate and faster.
Using this device, you can cut tiles with a thickness of up to 15 mm. When cutting forces of up to 600 kg are applied. Small sizes do not interfere with making a cut to a considerable depth, which is why you can purchase tiles of large dimensions. Ease of use increases the availability of a measuring line located close to the master. On the ruler you can find two scales, as well as a handle for fixing.
The range of rotation angles of the ruler can vary from -45 to +45 °. If your activity is connected with professional laying of tiles, then most likely you have to transport tools and related equipment quite often, and there is no exception to the tile cutter, which can be prepared before transportation by fixing the ruler to the case.
Extra features
The Sigma tile cutter of the aforementioned brand has a patented quick rail height adjustment system, this parameter will depend on the tile height. The handle on the rail will move quickly and accurately thanks to the presence of a ball bearing system, they are equipped with a divider handle.
As an additional feature of the model, it is worth highlighting the possibility of quick replacement of the separator. The desktop is spring-loaded, so you will feel the shock-absorbing effect at the moment when the material will be cut. This significantly reduces the rigidity of cutting, which is important when using brittle materials. The tool has a roller cutter, which is made of tungsten carbide. Its diameter is twelve mm.
Instructions for use manual tile cutter brand Sigma
Cutting tiles using a manual tile cutter does not require the master to have special skills. Before use, the tool must be checked for visible damage, the cutting roller must rotate without difficulty. Its surface must be correct, as well as devoid of potholes and burrs. The carriage must be moved without jamming or jerking. A radial bearing is provided for this.
It is necessary to check the condition of the bed, its surface must be free from visible impurities. Before you will be cutting tiles, its surface must be marked with a pencil, following the required dimensions. The product is located on the bed so that the marked line coincides with the path of the carriage. The distance to the cut from the edge of the tile should be approximately 10 mm, otherwise a neat edge cannot be obtained. The carriage should be held along the marking with some pressure, at the moment you should feel the necessary intensity of pressing. This is necessary so that the tile is not pressed through, the glaze should be cut.
You can draw the roller on the surface only once, otherwise the cut may turn out to be uneven. Now the handle should be turned to the working position, after which it drops with a sharp movement, as a result the product breaks along the cut. Before you use the tile cutter, it is recommended to soak the ceramic tile, as this greatly simplifies the cutting. A drop of oil can be applied along the cut line, this will make the movement of the working surface of the tool easier.
Sigma 3BM Professional Monorail Tile Cutter Reviews
Tile cutter professional brand 3BM can be purchased by you for 12500 rubles. According to users, the tool is extremely powerful, because its separating force is 1150 kg. While minimal effort must be exerted by the operator, the result will be a high precision cut. The tile cutter, the price of which is mentioned above, can cut relief and very hard thick materials. Such high power is combined with smoothness of cutting and smoothness, this was made possible thanks to the handle-separator.
According to users, the cutting length is 60 cm, while the diagonal is 42x42 cm. According to customers, the table is quite wide, this parameter is limited to 34 m. The “on my own” cutting system is also quite common today, multiple reviews from sides of professionals. The described tool is a good tile cutter, according to tile laying experts, since with a slight movement of the separator you can move it from the cutting position to the separation position. The line rotates, it is centered, so it can be quickly strengthened at any angle. The tool has a special button that allows you to immediately fix the ruler at the angles used. For convenient movement, the ruler is fixed on the platform along the rails.
Description of the Sigma 2D4 tile cutter
The Sigma 2D4 tile cutter is a professional hand tool, which will cost you 17,340 rubles. The cutting length can reach 610 mm, while the cut thickness is 22 mm. The weight of this equipment is 8.2 g. The tile cutter, the price of which is mentioned above, belongs to the TECNICA series and is intended for cutting tiles with a thickness of up to 22 mm. Power is 800 kg, and the master will have to cut, moving the working part away from him. The ruler is equipped with a double scale, it rotates and is centered, and also provides high precision cutting. This Sigma tile cutter is equipped with a 16 mm roller, as well as a limiter, which allows serial cutting. The desktop is spring-loaded, which, according to customers, is a necessary functionality.
Description of manual tile cutter Sigma grade 7A
This tool is a hand-held device with a cutting height of 12 mm. The cutting length is 33 cm. The diameter of the roller cutters can vary from 6 to 12 mm. Comes with a case. This manual Sigma tile cutter is designed for cutting porcelain tiles, as well as ceramic tiles. The strength of the separator is 500 kg, and the base of the cutters is titanium.
Conclusion
If you need to cut holes, then it is best to abandon the Sigma 7A model, since this functionality is not here, as well as an integrated swivel line, as well as a quick-change handle system.