The ability to quickly bring a machine gun or rifle into combat condition is especially relevant among the military and hunters. Seconds of delay can take prey, or even life. Especially for people of these professions created such a device as a three-point belt. This system has become an integral part of hunting, military, and more recently, sports equipment.
origin of name
The “three-point” belt got its name due to the presence of an average “floating” point in it. The weapon is mounted in three places. This three-point belt for a gun, machine gun, machine gun or rifle differs from the already outdated two-point version, in comparison with which the new mounting design is much more advanced.
What are the benefits of three-point carrying weapons?
Hunting for some people is very exciting. Often enthralled not so much by the result as by many hours of hunting down the game. At the same time, a person is able to overcome long distances without feeling tired at all. Anyone who has been on a hunt at least once knows that success to a greater extent depends on the ability to quickly bring a weapon into a combat state and fire a well-aimed shot. This can be done if the hands are not loaded, and the rifle is always ready. Ordinary two-point belts performed only one task - they saved a person from the labor of carrying weapons. But they were not suitable for quick aiming due to the peculiarities of the organization of the design of the two-point mount, which consisted in the fact that a well-aimed shot could only be fired if the weapon was removed from the shoulder. The three-point belt for the gun, unlike the classic mount, provides the ability to carry weapons for a long time and, if necessary, quickly use them without removing from the shoulder.
Using a single point for mounting
Single-point tactical belts are applicable for small-sized weapons (models not exceeding one meter). Fasteners are carried out using a single carbine, which is attached to the neck of the butt or to the back of the receiver. To perform a quick reset, the single-point system contains a fastex - a special buckle with three teeth. The disadvantage of this tactical belt is manifested during the run - the weapon gets tangled in the legs or hits the body. The weaknesses of such structures are as follows:
- Single point belt belts are very uncomfortable for long weapons.
- The suspension does not provide tight pressure to the body, as a result of which the owner is forced to constantly monitor the weapon so that it does not lower and does not scoop up various debris with the barrel.
Standard two-point carrying weapons
In a conventional two-point system, fasteners are carried out using two carbines. One of them clings to the swivel on the butt, and the second - with the help of a suspension to the butt plate. You can perform a quick reset of the gun with the help of fastex, which is located near the rear carbine. This method is considered classic and comfortable enough to carry weapons on one shoulder. You can adjust the length of the tactical belt with one hand. However, this use has its drawbacks:
- It does not make it possible to quickly transfer weapons to a combat position on the line of sight.
- To move a two-point weapon belt from one shoulder to another, you must completely remove the tape, and this is very tiring.
- Belt construction does not provide sufficient suspension density.
The two-point use of tactical belts is gradually being replaced by a three-point one.
Most popular option
A three-point belt, unlike a two-point belt, can be easily moved from one shoulder to another. These tactical belts provide tight fixation of weapons. They do not impede rapid firing. The three-point belt is ideal for overcoming long distances. If necessary, this design can be converted for one-point or two-point wear. The front suspension (mount) can be moved along the weapon from the first to the rear swivel and even to the rear attachment point. This is easy to do by sliding the front suspension on a sling that is pulled along a gun or machine gun. Thus, a three-point belt can be converted to a two-point or single-point belt.
The three-point fastening system is inconvenient for reloading a pump-action shotgun. To put such belts on this weapon is impractical, since they will interfere with the distortion of the forearm. Three-point belts can also be inconvenient for left-handed people, since the sling stretched along the weapon overlaps the window for ejecting the shot cartridges.
Features of a three-point weapon mount
The “floating” third point can change its location:
- Front swivel. Fixation occurs using fastex. To reset to the rear position, just unclench the buckle.
- Behind swivel.
Three-point tactical tapes do not contain various additional elements that are equipped with weapon belts. They already have significant comfort.
Standard three-point Zubr belt
This tactical belt is used to carry all types of long-barreled weapons with 2 cm swivels. The “Zubr-Standard” is not designed to carry an assault rifle. Belt production is a product with the following parameters:
- the belt tape has a width of 4 cm;
- belt thickness is 2.5 mm;
- products are made of polyamide;
- the product weighs 130 g.
The upgraded Zubr-Blitz, unlike its standard counterpart, has a quick reset function. The system of this multifunctional tactical belt has a quick-release buckle that allows for one-handed instant dumping of weapons.
Multifunctional weapon belt “Bison-Saiga”
This belt belt has found its wide application among hunters, especially owners of smooth-bore carbines “Saiga” (popularly, this model is also called “Boar”). It is for this model that one of the modifications of the weaponry multifunctional belts “Bison” is intended. For this mounting system, as well as for the two previous ones, the presence of a sling attachment is considered important. Its width is at least two centimeters. Unlike the previous two options, the Zubr-Saiga multifunctional weapon belt gives the hunter the ability to carry weapons in different positions - with the barrel raised up or down. According to hunters, wearing a carbine with a barrel up is the best option, as it allows you to keep in sight and control the muzzle. If necessary, the position can be quickly changed.
Product Feature:
- The belt tape has a width of 4 cm.
- The belt thickness is 2.5 mm.
- Color - olive or black.
- Mass - 130 g.
“Debt M2”
This name was given to the patented invention of Vladimir Kharlampov, the founder of Tactical Solutions. This mounting system differs from the standard three-point system in the absence of slings. The belt system consists of a pull-up belt and the main girth, which, connecting into a ring, wraps around the arrow of the body. Using a three-slot buckle, the pull-up belt is connected to the front swivel. The end of the belt protrudes from the buckle and moves the suspension point. According to some users, this system has two drawbacks:
- she looks unaesthetic;
- frequent clinging of the tape peeking out of the buckle to foreign objects (bushes, tree branches) is possible.
The advantage of this belt system is the ability to carry weapons freely on the chest and at hand.
“Debt M3”
It is an upgraded belt system that allows you to carry smoothbore and pump action shotguns, submachine guns, sniper rifles, machine guns, grenade launchers and machine guns. Differences of M3 from the previous version:
- The design of the M3 is considered universal, since it makes it possible to use the belt as an adjustable two-point. The belt can also be configured to carry weapons behind your back (biathlon version).
- The M3 has a wide removable shoulder strap.
- Reduce the number of buckles.
- The design is equipped with a low-noise lining and a “Riga” carbine.
Handicraft option
In order to be the happy owner of such multifunctional weapons tapes, it is not necessary to go to specialized and hunting stores. Having the necessary skills, as well as having the right materials, you can make a three-point belt with your own hands. To do this, you will need:
- Belt tape. Desirable from 2.5 to 3 meters long. The width of the belt should be 25 mm.
- Fasteks - 2 pieces.
- Buckles - 7 pieces.
Three-point seat belts. What it is?
Modern cars contain a passive safety system. Its main structural element is three-point belts.
They prevent dangerous movements of a person in the cabin when a car collides or as a result of sudden braking. Of great importance for the health of the driver and passenger is the uniform distribution of energy, which is possible only with a V-shaped arrangement of belts. This is the design of the three-point seat belts. What kind of system this can be seen in the photo below.
How is the belt security system arranged?
The three-point seat belt consists of three elements:
- Strap. High-strength materials are used for its manufacture. The fastening of the webbing with the body is carried out in three places: on the stand, on the doorstep, on the link with a lock. Car seat belts can be adjusted if necessary, adapting to the growth of a person.
- Castle. It is located at the seat of the car and performs the function of locking the seat belt. The design of the lock contains a switch that is connected to the circuit of the audiovisual signal system of the car. This is intended to remind the driver and passengers of the efficient use of belts. The strap is connected to the lock using a movable metal tongue.
- Coil. It is located on the body post. Intended for forced unwinding and automatic winding of belts. To block unwinding as a result of an accident, an inertial mechanism is in the coil. The seat belt is pulled out of the drum in slow movements.
The installation of three-point belts in the passenger compartment was first proposed by Volvo in 1959.
Passenger Fixing Options
- Non-inertial. This safety system is characterized by individual adjustment of belts for a specific person. This option can be found in cars until 1980 of release. Modern models are not equipped with such a system. The disadvantage of this fixation is the inability to adjust the belt to the parameters of the child.
- Inertial. This system contains a belt with which an adult and a child can be tightly fixed using an automatic retracting mechanism. In the event of a collision, braking, the movement of the seat belt is blocked by the locking mechanism. For the manufacture of tapes, elastic fabric is used, which, depending on the load, can be lengthened.
Three-point belts found their application in hunting, in sports, in military affairs. They are the most popular personal protective equipment in the car.
Having a fairly simple design, three-point belt systems are notable for their considerable strength, reliability and comfort during operation.