Impregnation for wood for internal work is a composition that does not form a film on the surface of the material. By its consistency, it should be liquid and well absorbed into the body of wood at the most impressive depth possible, which distinguishes it from varnishes and paints.
Features impregnation for wood
When choosing formulations for processing wood elements that are used indoors, you should not rely on the fact that they will protect the surface from ultraviolet radiation. This is due to the fact that in such impregnations there are no strong biocides. However, the impregnation for wood for internal work can have its own chemical composition, which determines the purpose.
Purpose wood impregnation
Impregnation may be designed to protect against rot. The composition of this bioprotective oil includes ingredients that prevent the occurrence of fungus and mold. Wood is also afraid of insects. If there is a likelihood that products from this material can be affected by bugs, then it is worth treating them with insecticides. Sometimes it becomes necessary to cover material that has already been affected by pests, then you can not do just surface treatment. Fire-retardant impregnation for wood perfectly saves products from fire, however, it is worth considering that such compositions are water-soluble. The tree, of course, will not become completely non-combustible, but the period until ignition when exposed to fire will be increased.
If there is a need to reduce the consumption of paintwork, which is supposed to be used for subsequent wood finishing, then it is worth choosing a primer with an appropriate purpose. After its application, varnishes and azure intended for wood can be used for coloring. After preparation by impregnation, the varnish will lie more evenly, absorb well and do not form spots (this is confirmed by reviews of many consumers). If you have to paint furniture, then prepare their surface using impregnation is necessary without fail. Whereas when it comes to finishing work, for example, on the floor surface, the need for impregnation will be determined by the rules and features of the process.
Linseed oil impregnation
Impregnation of wood with linseed oil is made if necessary to improve the appearance of the product. This composition is used as an independent decorative coating. After such processing, the surface will not only look more aesthetically pleasing, but will also last for a longer period of time. The surface will gain the ability to repel dirt and water. In addition, the oil can be tinted in all kinds of shades.
Reviews say that the described impregnation for wood for internal work allows you to achieve a natural shade of the surface. After carrying out the work, you will receive a product with a favorably distinguished relief and attractive texture. The base will be protected from mold, mildew, blue stain and rot. His ability to breathe will not disappear, but at the same time the product will gain moisture-repellent characteristics. Impregnation will give the product resistance to fading, peeling, drying, cracking. The coating does not pose a risk to human health.
Features of use
Impregnation for wood for internal work can be applied in several ways, one of them involves less impressive labor costs and involves applying two layers. After the first of them is on the surface, it is necessary to leave the base for two days. In this case, the product must be dried under the influence of a radiator or sunlight.
Fire-retardant impregnation for wood or any other that has a different purpose should be applied to a previously dried surface. In addition, the base must first be freed from the old coating. If it is supposed to work with wood that has an oil coating, then it is necessary to first process the skin. Before starting to apply linseed oil, it must first be boiled twice, which will speed up drying. Do not start using the oil without mixing it.
Application must be done in a generous layer using a brush. Movements should be directed along the fibers. The tool should be rubbed a little, which will ensure good penetration. After a certain time, when the composition is absorbed, but not more than 1 hour later, an excess amount of oil should be removed using a rag. After the surface of the product to be polished. Wood can be polished with natural wax, which will give a pleasant shine.
Tools and materials
Impregnation work should be done by preparing some materials and tools, among them:
- natural wax;
- impregnation;
- brush;
- skin;
- rags.
Impregnation cost
Depending on what goals you are pursuing during the processing of wood, it is necessary to choose an impregnation with the appropriate characteristics. The Pinotex mixture, the price of which varies depending on its purpose, is produced in Estonia. The hue in this case may be different, as well as the composition. Choosing a wood protection product that can perfectly reveal the texture, you will have to pay about 1400 rubles. But the composition from this manufacturer with antiseptic characteristics costs from 1000 rubles.
If you need wood impregnation, the price of which is slightly lower, then you can choose the composition of the Serbian production. He will have to pay 281 rubles. The mixture has universal qualities. Impregnation can be glossy, its cost is 383 rubles. Such oil from the Serbian producer can be used as an independent decorative composition. According to consumer reviews, Pinotex brand impregnation, the price of which is much higher than analogues from other manufacturers, has excellent qualities, and you can buy oil in containers of different volumes.
If you properly prepare the wood and apply the impregnation in accordance with all the rules, then the product will last a long time and will look very attractive.