The Zubr puncher, reviews of which you can read below, is a household-class power tool. He will become an indispensable assistant for the home master.
General reviews
All users who have been operating Zubr drills for several years, note that it is possible to work with these devices for a long time and continuously. The equipment allows punching holes, but nothing more. For major repairs, consumers are advised to prefer something more powerful, because the described tools are able to perform tasks exclusively in everyday life.
During the operation, consumers note that service centers have to be contacted only for urgent needs. When working, the tool does not heat up, but it’s better not to be too zealous, excluding hard and long work. Among the advantages should be highlighted:
- the speed of making holes;
- convenience of the case;
- anti-slip properties of pens.
The Zubr puncher, the reviews of which are recommended to be read before purchasing the product, also has some drawbacks, they are expressed in the fact that certain forces must be applied for work, this applies not only to chiselling, but also to drilling. However, the manufacturer indicates that the device does not require efforts from the operator.
Reviews about the model -800
This "Zubr" puncher, reviews of which indicate that the model mentioned in the subheading is a good purchase, can help a home foreman during repair work in everyday life. As users emphasize, the case has compact dimensions, but the impact force is quite impressive, which can not but rejoice. You can verify this if you try to make a hole in the wall, which has a thickness of 2 bricks. Other users note that with this model they made holes in the wall, which was made of concrete grade M-500. With little effort, you will have to act if there is a need to make a 10-cm niche in the wall.
This Zubr puncher, reviews of which will allow you to make the right choice, comes with a regular cartridge, which is complemented by a chuck. If you check them in work, then you can make sure that they hold firmly enough, in addition, you will not encounter the problem of cranking. Spare brushes are not at all superfluous in work. Consumers like that they come bundled. As a drawback, you can highlight the lubricant, it is completely unsuitable, as it is quickly erased and is very liquid. Generally speaking, consumers respond positively to this model. As a result, they note a rich set and powerful impact force.
Reviews about the model -28-800
The Zubr ZP 28 800 puncher, reviews of which you can read below, will cost the consumer 6,200 rubles. This model, according to customers, has an improved impact mechanism, which guarantees high performance. You can hold the tool better with the extra handle. Home masters like the fact that the equipment is able to work in one of three modes, among them there are:
- chiselling;
- hammer drilling;
- drilling.
There is also a mode of rotation of the bit. It is noteworthy that this tool comes in a convenient case. The diameter of the drilling can vary from 4 to 18 mm. You can adjust the speed smoothly. The gearbox has a metal casing. As buyers emphasize, this significantly extends the life of the product. For protection, when a drill lock occurs, the safety clutch that this tool has is needed.
Reviews of the punch brand ZP-805EK
The Zubr ZP 805EK puncher, reviews of which help consumers to tip their choice in the direction of a particular tool, costs 5,200 rubles. Consumers speak of this equipment as a tool that has an effective percussion mechanism. Regardless of what the pressure will be, the impact energy is formed.
Home masters speak of this device as a unit that is characterized by a quick change of equipment. This is made possible thanks to the SDS-plus cartridge. The recommended drilling diameter varies from 4 to 20 mm, these indicators are quite impressive. Due to the quick access to the piston and carbon brushes, the consumer will be able to easily carry out maintenance. It, according to customers, is simplified.
Reviews on the puncher model ZP-900EK
The Zub ZP 900EK puncher, reviews of which will help you understand whether to purchase this model, costs 5300 rubles. This equipment is characterized in that it has a vibration damping system. Buyers in their reviews note that this functionality allows you to increase comfort at work. The device works due to the engine, whose power is 900 watts. Additionally, you can use one more handle, which is covered with rubber and is able to rotate around its axis, which is why you can work with the tool in any position.
If you read the reviews, you can understand that the punch is protected by a special casing of metal, this shock mechanism provides increased tool strength. One cannot but mention the quick choice of the mode. In order to prefer one or another mode, you can use the special controller. Consumers consider the additional advantages also compact size, the presence of a case, low weight, frost resistance of the power cord and a safety clutch, the last of which interrupts the transmission of torque when the drill gets stuck in the material.
Reviews of the punch brand ZP-1100EK
On sale you can find another perforator "Bison ZP 1100EK", reviews of which will be presented below. In order to become more familiar with this model, initially you should pay attention to the cost, which differs from the prices of the above models. You will have to pay 8500 rubles for this tool. The rotary hammer has a powerful engine, at 1100 watts, as well as an effective pneumatic hammer mechanism.
According to users, it will be possible to work in one of two modes, namely, chiselling or drilling with a stroke. The internal elements are reliably protected from damage, because the manufacturer has provided for the protection of the metal housing. The safety clutch stops if the drill is in the material. Consumers like that the diameter of drilling in concrete reaches 38 mm, with regard to the maximum impact force, it is 8 J.
Reviews about the model -780EC
The Zub ZP 780EK puncher, reviews of which will help you make the right choice, will cost the buyer 4400 rubles. This model is a powerful power tool with which it will be possible to make holes with a diameter of up to 26 mm in concrete. As buyers emphasize, it is possible to work with this equipment with other hard materials. This model belongs to the household class, and is equipped with an engine for 780 watts. You can take advantage of the pneumatic impact mechanism, the force of which is 3 J.
Conclusion
The production of the above-described perforators is based on the domestic assembly of Chinese components. Using this equipment, you can drill a hole in concrete and hard brick without any difficulty.