Makita 6261DWPE cordless drill is a tool for twisting fasteners and drilling holes.
Why you should buy
The equipment has an increased output power, which successfully combines with the compactness of the case. All these features provide high work efficiency. It is possible to replace equipment without special efforts with the help of quick-clamping chuck. Depending on the intensity of work, you can set the torque.
Specifications
Makita 6261DWPE has a battery, the voltage of which is 9.6V, its capacity is 1.3 A * h. With this tool, it will be possible to drill holes in the metal, the diameter of which will be 10 millimeters. If it is necessary to carry out such manipulations with wood, then the diameter of the holes made can be equal to 21 millimeters. The device works due to the brush motor, which provides a maximum torque of 24 Newton meters. The device is equipped with a 10 mm cartridge, and it is permissible to work at one of two possible speeds.
Model Makita 6261DWPE does not have a shock function, however, you can use the reverse. It is very convenient to work with the device, since it has a fairly compact size: 192 x 239 millimeters. Two batteries are supplied. This drill is perfect for solving everyday problems. It fits perfectly in your hand, and you will not get tired, since the weight of the device is 1.4 kilograms. If necessary, it will be possible to charge in just half an hour.
Model description
A drill / driver works on a battery and copes with drilling holes in a wide variety of materials, it can be used to remove and install fasteners according to the type of screws and screws. The design is characterized by a rubberized handle, which is characterized by ergonomics. An added convenience is electronic speed control. Before purchasing, you need to pay attention to the fact that the model does not have a lock switch, which is not always convenient when working. There is no illumination of the working area either. The kit includes: charger, double-sided bit, the length of which is 50 millimeters. Looking at the Makita 6261DWPE, you will notice that it has a convenient and large speed switch.
Key Features Reviews
Many consumers purchase the described tool for construction work. As practice and reviews show, the equipment can last for several years, and the capacity will be enough to carry out any work. Home masters note that with the help of this unit you can screw in any screws, drill a tree using a small diameter drill. If there is a need to make more impressive holes in diameter, then a professional drill should be used.
Working at height with the help of such a tool is very convenient, since it has a low weight. Experienced customers claim that after a fall, the case remains intact, and no cracks appear on it. This indicates high wear resistance. You should rely on the fact that the Makita 6261DWPE drill, after several years of operation, may lose in the power and capacity of the batteries. If you encounter such a problem, it will be necessary to decide: purchase two new batteries, the cost of which is 2500 rubles, or add to buy a new screwdriver for 3700 rubles. For domestic use, such a model fits perfectly.
Security Reviews
Experienced craftsmen advise to maintain order at the workplace, as well as provide good illumination of the table. Causes of accidents can be dark places and cluttered areas. Avoid working with power tools in places where the atmosphere is considered explosive. These include the close proximity of flammable liquids and gases, as well as a large accumulation of dust.
According to users, the Makita 6261DWPE drill / driver serves as a source of sparks, they can cause a fire of fumes or dust. Therefore, the organization of the workplace must be taken very seriously. Make sure that the plug of the tool matches the outlet. Experts do not recommend modifying the plug yourself. According to users, if you use the original plugs, as well as their corresponding sockets, then you can significantly reduce the risk of electric shock to the operator.
User Reviews
When working with a power tool, hold it by insulated surfaces. It is important to exclude the possibility of contact of cutting elements with hidden wiring or their own cord. If contact with a wire that is energized does occur, it may cause electric shock to the master.
Those people who have been using the Makita 6261DWPE cordless drill for more than one year, especially emphasize that it is necessary to provide quality foot support during operation. If manipulations are performed at height, you need to make sure that there is no one below. Hands should be kept as far away as possible from rotating parts. Do not leave the equipment working when you are not holding it in your hands. Immediately after completion of work, experts do not recommend touching the workpiece or drill, as the surfaces may be too hot, which will result in skin burns.
Power Tool Safety Reviews with Battery Pack
The battery pack must never be disassembled. If electrolyte gets into your eyes, then rinse them with clean water, and then seek medical help. If this is not done, then the result may be loss of vision. If the battery pack will not be used, then the terminals must be covered with a cover. Masters using the Makita 6261DWPE, reviews of which will help you make the right choice, note that it is necessary to exclude the contact of batteries with other conductive materials.
The battery pack must never be stored in a container with other metal objects like coins or nails. It is important to eliminate the interaction of the battery pack with moisture. If a short circuit occurs in the battery, this can cause a strong current supply, fire and overheating, in some cases the battery malfunctions.
Reviews on removing and installing the battery pack
Before performing the above manipulations, the tool should be turned off. In order to remove the battery pack, it must be removed from the tool by first pressing the buttons located on both sides of the battery pack. When the cordless Makita 6261DWPE cordless drill / driver is operated, it is quite often necessary to install a battery pack. To do this, combine the tab of the named element with a groove in the housing. After that, the element is installed in place. You should hear a characteristic click, and if you do not, the unit may fall out of the power tool during use. Such unpleasant moments can cause damage not only to the unit itself, but also to the operator’s legs.