In the design of private houses today, basement siding is often used, which has two goals. One of them is the protection of the surface from external influences, the other is decoration.
Why choose Deck
Using this finish, you can create an outer layer under which it is easy to hide the thermal insulation. Thanks to this, heating costs are reduced, and the lower part of the house gains reliable protection from dirt, water and snowdrifts. By visiting the building materials store, you can find Deke products. The basement siding of this manufacturer is characterized by many advantages, among them: ease of installation, duration of operation, as well as a wide range of use temperatures.
Main characteristics
Considering the features of the Deck basement siding , you can understand that these panels can last more than 50 years with proper installation and proper care. The texture during operation does not lose its original properties, and you can mount the material at any temperature range. The siding is able to easily tolerate external damage, among other things, it has heat resistance in the range from +50 to -50 degrees.
Admittedly, the products of the Russian manufacturer "Deck" are very popular today. Basement siding is no exception. It is not combustible, when a fire occurs it will only smolder, in addition, it does not conduct electric current, and toxic additives are not used in its production. Due to the fact that the material was created to protect the facade, it copes with the vagaries of nature perfectly, the negative impacts are not afraid of it, while the products do not delaminate and do not rot. You will not see corrosion processes on its surface, it is not interesting to insect pests, during installation you will note that there is no need to have special skills for work.
The manufacturer made sure that the panels are easily attached to each other due to the presence of a lock connection. Deck vinyl siding has the ability to breathe; condensation does not occur on its inner surface. To leave, you just need to wash it, after which it again looks like new. Additionally reinforced products with a stiffener, which is able to withstand mechanical stress. If you observe the correct gap width, then during installation the geometry of the pattern will not be disturbed, and even temperature fluctuations will not affect this in any way. The appearance of the panels is so realistic that they look like natural stone.
Characteristics of basement siding of the Deck brand of various collections
Deck siding, the colors of which can be the most diverse, is offered for sale by several collections. One of them - Berg - was created to simulate a classic brick. The material has five primary colors, namely: brick, brown, golden, cherry and gray. The Berg collection will allow you to create a facade that imitates natural stone, handcrafted. In the end, you will be able to get a surface that will not only be powerful and reliable, but also very interesting in appearance.
The Stein collection is represented by imitation of sandstone. In the series you can find five colors, and the size of such a siding is 1196 x 426 millimeters. You do not have to worry about looking for additional elements from other manufacturers, since Decke took care of this. On sale you can find starting strips, corner elements and j-profiles.
You can follow the example of many consumers and choose Deke products. The basement siding of this manufacturer has another series - Fels, which looks very reliable and severe, and looks like a rock of rock origin. Product size - 450 x 1152 mm. There are a lot of color solutions, namely: northern rock, rye pearl, ivory and mother of pearl.
Installation: preparation
Deck siding, reviews of which are only positive, you can install yourself. According to users, initially it is best to take care of having a certain set of tools. For installation and marking you will need: a screwdriver and a screwdriver, cord, square, tape measure, level and pencil. For sawing and creating a crate you will need: a hacksaw for metal, scissors for metal, a grinder, a knife-cutter, as well as an electric jigsaw.
Stages of work
Deck siding, the dimensions of which were mentioned above, is installed in several stages. First, it will be necessary to create a crate, based on which is a wooden beam or galvanized profiles. The latter option will last much longer, but will cost more. The guides are initially installed, only after that you can proceed to the installation of rack profiles. The distance between the ribs should be calculated taking into account the surface of the building, the amount of work and the dimensions of the products. The step should not seem more than 60 centimeters. The surface can be pre-leveled, as an alternative, special linings are used that allow you to level out irregularities. At the next stage, the starting bar is installed, only after that you can proceed to the installation of the panels. Do not forget that j-profiles and mounting angles are useful in the work.
Methodology
In the building materials market, the Decke company has proven itself quite well; you can find the basement siding of this manufacturer for sale at an affordable cost. After all the preparatory work is completed, and the crate is installed, you can proceed to the installation of the panels. Work begins on the left, you are gradually moving to the right. The first panel is installed in the start bar, while the next element is attached to the right. Lock connections should fall into a groove. After completing the first row, you can start the second one, the master proceeds to the new wall after the previous one has been completely mounted.
Setting the starting bar is extremely important, it is mounted after determining the horizon, or rather, the lowest and highest points on the surface. A starting bar is installed around the perimeter, and the end and beginning of the profiles should converge perfectly. For this, the master is recommended to use a water level. As soon as the installation of one row is completed, you can proceed to the installation of the corner. It is fixed with two screws in the upper part.
Cost
Deck siding, the prices of which should interest you, is offered for sale in a wide assortment. The average cost per panel is 150 rubles. Before starting work, the master must determine how much material is needed to conduct the cladding. For this, the area of all walls is initially calculated, and after that - the area of one panel. Then the first value is divided into the second, this will allow you to understand how many products you need to purchase. It is necessary to buy material with a margin.
Conclusion
Deck siding, the prices for which are quite reasonable, has many advantages, you can also consider it as a material for decorating your home or office building, which will extend the life of the building for any purpose.