Anchor weaving is a find of jewelers of antiquity. With its help, the first chains of precious metals were created. Rounded links connected to each other at an angle of 90 °. Over time, the products of the masters became more complex and bizarre: the geometric shapes of the links changed, their unconventional combinations were created, new types of section appeared. At the heart of many jewelry masterpieces of our time is the oldest weaving chain. Anchor linkage adds charm to them. With the help of such jewelry you can create original and fresh images. Before disassembling non-standard subspecies of weaving, let's figure out what is its traditional version.
Classic version
Classical anchor weaving means oval links connected to each other at right angles. Jewelry created in this way is quite durable. But it is worth considering that even one link made poorly can lead to an early rupture of the product, and in the worst case, to its loss. The classic anchor weaving of the chain is the simplest of all, so the jewelry made in it will not cause trouble when leaving. Jewelry has a certain romantic halo. In appearance, they resemble anchor chains that are used on heavy ships plowing the sea. This vibrant association gave technology its name. Anchor weaving of a gold chain looks especially impressive. A photo of the model is presented below.
Varieties of classic weaving
The traditional version has many varieties. One of them is the anchor weaving "1 + 1". It differs from the classical one in a more elongated form of links, which are approximately two times longer than traditional ones. In the "1 + 2" weaving, the links alternate. The first digit indicates the number of standard elements in the combination, the second indicates the number of elongated ones. Thus, first comes one short, then two long links, then again short and so on. Variations can be very different, for example, "5 + 1". This variety involves sequential connections of five ordinary elements, alternating with short links. What else could be the anchor weaving of a chain?
Anchored "hammered together" weaving
Fans of jewelry open up an incredibly wide selection of jewelry. It is worth paying attention to chains and bracelets of anchor "hammered together" weaving. Their links are snug against each other, leaving only minimal gaps between them. Such chains look more impressive and voluminous than traditional. Thin links will make jewelry made of precious metal a charming ladies' jewelry. A chain made of massive elements will undoubtedly look great on a man’s neck or arm.
Italian Bismarck
The most voluminous jewelry is created immediately from two classic anchor chains. Their links are soldered to each other and form a wide braided ribbon. Two chains combined into one are often called the “Italian Bismarck.” Such weaving allows you to create luxurious bracelets and chic chains. Product widths vary. Several chains can be soldered into one.
"Sea anchor"
The Marine Anchor technique is worthy of particular attention. The links of a chain made in this way have jumpers. Due to this feature, this subspecies is almost identical to weaving a real anchor chain used on large ships. After all, the jumpers in the elements of jewelry are similar to buttresses, struts that prevent its deformation. Such striking similarities caused the name of the weaving. Thanks to the jumpers, jewelry made in the technique of "Sea Anchor" are considered one of the most durable. They are made of various precious metals. However, the greatest charm has a silver chain. Anchor weaving with jumpers made of this metal really evokes thoughts of distant swimming.
"Bastille"
The following subspecies, worthy of detailed consideration, has the non-trivial name "bastille." This technique is characterized by double oval links. They are connected in pairs perpendicular to each other. Products look voluminous, characterized by rigor and reliability. These are real men's chains of anchor weaving. Usually they are made in gold and positioned as independent jewelry.
Rollo
Subspecies of anchor weaving can differ from each other in the form of links. Classical oval shapes compete with non-traditional round ones. Such links are characteristic for weaving "roll". It is also called “beltser” or “shopard”. The latter name is used especially often. And there are reasons for this. Once the models with round links were in the collections of the Swiss fashion house Chopard. It was he who made this anchor chain weaving really popular. A photo of the product made using the Rollo technique is presented below.
Distinguish between straight and twisted "roll". The links in the chains can be narrow or wide.
Garibaldi
There is also a “double roll”. It is distinguished as a separate subspecies of anchor weaving and is called “Garibaldi”. The history of the appellation goes back to the memorable historical events that took place in Italy in the 19th century, when the country was under Austrian oppression. Giuseppe Garibaldi fought for the liberation of his homeland. In honor of the national hero of Italy, weaving got its name. Chains made in this way look solid. They, as well as products of weaving "bastille", belong to purely male jewelry.
Giotto
For women and girls jewelry made in the technique of "giotto" is very to face. This is a rather unusual chain weaving. Anchor coupling of large thin links in the form of rings gives the product some originality and eccentricity. "Giotto" - a modification of the subspecies "shopard." She is surprisingly weightless and airy in appearance. With such an ornament on the arm or neck, any woman will look rich and chic. The chain of white gold of the anchor weaving “giotto” also looks elegant. Silver items also have a charm. The giotto chain is one of the strongest. Even if it breaks, which is unlikely, repairing the jewelry will cost quite cheaply and won't take much time. Thanks to its simple structure, it is easy to care for.
The name "giotto" did not take root in Russia. Due to the similarity of chain links with curtain rings, the names “curtain” and “curtain” are used instead. In addition to the classical technique, there are “double giottos” and “triple giottos”.
"Venetian weaving"
Both men and women will look luxuriously, items made using the Venetian weaving technique. Unlike classics, its basis is not rounded, but rectangular or square elements, making this chain weaving original. The anchor connection of the wide links is strong enough. Manual manufacture of such a product is hard and painstaking work. It can only be performed by an experienced master. Depending on the number of links in the block, a double and a triple "Venetian" are distinguished. It can be straight or curved.
"Cord weaving"
No less original look jewelry made using the "cord weaving" technique. With it, twisted bracelets and chains with step or wave-like patterns are made. Each link in the jewelry is connected immediately with several subsequent ones. Due to the complex structure of the chain weaving, they become voluminous and look truly luxurious.
Moscow bit
Of particular interest is the weaving "Moscow bit". It combines the classic anchor and elements unusual for this type: additional curved links connected to oval ones. Due to the unconventional form, massive appearance and its name, such jewelry is positioned as a symbol of prosperity and luxury of residents of megacities. Gold chain will help to emphasize the status and wealth of its owner. Anchor weaving “Moscow bit” is one of the few techniques that are used to make purely male jewelry.
Anchor Rhombus
Not particularly common, but attractive in appearance are chains made using the anchor rhombus technique. How weaving came about is not exactly known. Presumably, it appeared as a result of the merger of the classical anchor technique with the armor, called "rhombo". Weaving is a perpendicular connection of rhomboid links. Jewelry, as a rule, looks elegant regardless of the metal from which they are made.
Fantasy Anchor Weaving
A catchy, catchy look will help create fantasy anchor chains. Copyrighted products number dozens and do not lend themselves to standard classification. They are original works of jewelry, in which it is difficult to recognize their ancestor: the traditional anchor chain.
Masters give vent to imagination, and as a result, truly non-trivial jewelry appears. The most famous fantasy anchor weaves are Aurora and Hawaiian. They look somewhat extravagant. In the wave-like "Aurora", the links are twisted into a spiral as if. In the "Hawaiian" paired elements of an unusual shape are connected.
The fantasy of master jewelers knows no bounds. They make chains of elements of different shapes and sizes. So, in one piece of jewelry there can be found links of chain-link weaving “mobius” and round “shopard”. It may contain elements created from different types of gold. Indeed, a truly vivid unique image is capable of creating precisely a fantasy chain.
Anchor weaving (silver and gold) - the current trend
Since ancient times, anchor chains of gold and silver have been the most sought-after jewelry. The strict simplicity of weaving precious metal products favorably emphasizes the status, wealth, and also the good taste of its owners. Jewelry can be subtle and elegant, massive and powerful.
In fact, anchor chains are unisex. Among the unprecedented variety of jewelry creations, both men and women will easily find products that suit them. Chains, depending on the thickness, can be used to wear pendants, pendants, crosses, as well as independent jewelry. Due to its versatility at all times, products created using the technology of anchor weaving will have their fans.