Chainsaws today are increasingly seen not only in the hands of professionals, but also owners of private lands who like to work with wood. With a chainsaw, you can cut tree trunks, cut thick branches, even cut down the forest. Among other market offers, the Patriot-3816 chainsaw should be highlighted, which will be discussed in our article.
Key Features Reviews
The aforementioned chainsaw, according to consumers, is a fairly powerful tool for domestic use. The equipment will do well with small trees and pruned branches. The design is easy to manage, with its help you can work even in hard-to-reach places.
This line of units, as consumers emphasize, has a braking device that instantly stops the circuit when unforeseen situations occur. To prevent accidental operation, the device has a gas lever lock.
Specifications
The Patriot-3816 chainsaw, according to customers, has a tire of optimum length, which is 40 cm. The engine capacity here is 38 cm 3 . The width of the groove reaches 1.3 mm. The power of the device is 1, 5 kW or 2 liters. from. The number of links at the Patriot-3816 chainsaw is 57.
The oil tank holds 0.21 liters. The design has an easy-start system. The equipment weighs 4.85 kg. Idling speeds in it reach 3000 per minute. Users emphasize that it is impossible to work with one hand with this tool in order to ensure safety.
Customers like the overall dimensions, which in this case are 430 x 260 x 295 mm. The noise level of the Patriot-3816 chainsaw reaches 113 decibels during operation. The fuel tank fits 0.31 liters, which provides the possibility of a long uninterrupted operation without the need for refueling. The chain pitch of this model is 3/8 inch. The length of the tire is 16 inches.
Positive feedback
After reading reviews on the Patriot-3816 chainsaw, you can understand whether you should buy this model. Among the main positive points that consumers note are:
- Thoughtful management.
- Safety of use.
- Reliability of a design.
The gas lever is responsible for the control, the blocking of which prevents the device from being unintentionally started. As consumers emphasize, during operation, operation safety may also be pleasant. The operator’s hand is protected during operation of this tool, which eliminates injuries due to breakage and slipping of the equipment.
The Patriot chainsaw has a robust design. The driven sprocket is mounted on four rivets, which indicates durability. An additional advantage buyers consider a balanced center of gravity. This makes the job easy and effortless. The cylinder walls are chrome-plated, which increases the durability of the equipment and reduces friction. You may also need a vibration isolation system, as well as an easy start.
Practical and easy to use reviews
If you want to spend more time on vacation and less on work, you should buy a chainsaw, described in the article. With it, you can cut dry trees, harvest firewood for the winter, and also deal with bushes. You will perform all these tasks without much effort. Consumers believe that this is not a complete list of the positive features of the Patriot chainsaw. It also provides safe operation. The chain brake is responsible for this.
You might also like the ease of maintenance. It is expressed in easy access to spark plugs and an air filter. You can carry out maintenance yourself. The chain is lubricated automatically, which simplifies use. Good balance means working without stress. The handle features ergonomics and an anti-vibration advanced system. Customers especially emphasize the durability of the design. The driven sprocket, which is securely fixed on rivets, is responsible for this.
Operating Instructions: Startup
Quite often, after purchasing the described equipment, users are wondering about how to start a chainsaw. The first step is to set the chain brake to the off position. To do this, the brake lever moves forward. Then it is necessary to fill the fuel mixture into the neck of the fuel tank. Oil is poured into the chain lubricant tank. Lubricant and fuel tanks are marked with the corresponding icons.
Now you can set the ignition in the appropriate position. The choke lever extends fully. This will set it to the “Run” position. Now you should press the primer button several times. This will help fill the carburetor fuel mixture.
Chainsaw fits on a stable surface. In this case, the chain should rotate freely and be at a safe distance from surrounding objects. After reading the Patriot-3816 chainsaw instruction manual, you will be able to understand that the next step is to hold the front handle by placing your right foot on the base of the rear handle. With your free hand, you can pull the starter handle. He must catch on.
Up to 30 cm long, the starter handle gently pulls up. Then you have to lower it. The choke lever should be set to mid-position. It is required to pull the starter handle several times until the engine starts. It should be allowed to warm for 15 seconds. Then you can pull the trigger and remove the choke lever.
Work should be carried out by holding the saw well with both hands. It is absolutely forbidden to hold the tool by the chain brake. If the engine warms up, the same procedures should be followed as with a cold start. However, the air damper does not extend. There is no need to press the primer.
Chainsaw Stop Instructions
To stop the chainsaw, it is necessary to release the gas lever, which will help reduce engine speed. After that, the switch can be moved to the appropriate position.
After completion of work, the fuel mixture may remain in the tank, which should be drained into the canister. You do not need to leave it in the tank for more than five days, as this can cause unstable operation of the motor. For a rather long time, lubricating oil may be in the tank. During refueling, use only original mineral and semi-synthetic oils from the Patriot manufacturer, which are designed for two-stroke engines. It is forbidden to use oil for four-stroke engines when preparing a mixture for two-stroke engines.
Carb adjustment
During operation, you may need to adjust the Patriot-3816 chainsaw carburetor. Adjustment is divided into 2 main stages. The first is basic and is carried out with the engine turned on. The second will need to be done when the engine warms up.
For the setup procedure, read the instructions. At the first stage, the high and low speed adjusting screws turn clockwise until you meet the highest resistance. As soon as the screws reach the stop, they should be moved in the opposite direction and stopped when passing 1.5 turns. Now you should turn on the engine at medium speed and warm it up for 10 minutes.
The idle screw should be moved clockwise. It can only be omitted when the motor comes into stable operation. The chain must not move during this. In idle mode, the motor may stall. Thus it is necessary to bring the adjusting screw all the way clockwise. You may encounter the chain starting to move. In this case, the adjustment screw must be turned in the opposite direction.
The cost of spare parts
During its operation, you may need spare parts for the Patriot-3816 chainsaw. Hand starter can be purchased for 650 rubles. The chain tensioner will cost you 107 rubles. You can buy an ignition coil for 1100 rubles. Welded tire - for 1050 rubles. A flywheel costs 450 rubles, a deflector costs 194 rubles, and a candle costs 80 rubles. The carburetor will cost the consumer 690 rubles. A leading asterisk can be bought for 330 rubles.
Conclusion
Before you start operating a chainsaw, you must realize that it is you who determines the life of the tool. To do this, you should correctly distribute the loads and allow the tool to rest. A chainsaw loves care.
The unit will be ready to last longer and will surprise you with the ease of operation if the working body is clean and well lubricated. The sawing part has its own resource of work. A tire can survive two chains. As a rule, the chain serves for 2-3 sharpenings. After that, you need to part with it.