If you familiarize yourself with the assortment of the heat exchange equipment market, you can understand that Funke are heat exchangers, which are some of the best among analog solutions. They are distinguished by a high heat transfer coefficient, the possibility of an additional increase in power, as well as the presence of a self-cleaning effect. The latter feature is provided by the use of a highly turbulent flow.
Customer reviews of the main features of Funke brand heat exchangers
When operating heat-exchange equipment, reliability in the matter of mixing media is important. The described heat exchangers provide its high degree. They are easy to dismantle and clean, they are compact, which gives advantages and the possibility of installation even in small rooms. According to consumers, Funke are heat exchangers that have a unique design and meet high quality standards.
Additional qualities
If the conditions of their operation are observed, then the costs will be minimal. When using the heat exchanger, it is important to monitor the seals that will undergo natural wear. The package of plates, depending on the operating mode, can be pulled in order to achieve its minimum size. Consolidation if necessary, according to consumers, is quite easy to replace. After that, the equipment can be used at full capacity.
Brand Plate Heat Exchangers Overview
On sale you can find many varieties of plate heat exchangers of the described brand. For example, a Funke FP 22-55-1 EH heat exchanger is an equipment that consists of a package of heat transfer profiled plates. They have seals that separate channels and media.
This series should include a semi-welded heat exchanger in which the plates are welded on one side and form cassettes. The other side of the channels is sealed by the standard method. The Funke FP 09-31-1 EH heat exchanger can be used in different conditions, which will depend on temperature and pressure. The semi-welded version is designed for high pressure; it is also used in refrigeration equipment.
If you have FPSF equipment in front of you, this indicates that the heat exchanger has a separate channel for contamination, the latter of which may contain particulate matter. Structurally, this option is similar to the above, but the difference is in the profiling, in which the points of contact are located in one row and reduced. Funke FP SS heat exchanger is a high-reliability device with double walls. The plates are composed of corrugated plates that form narrow channels. The plates are well sealed by the standard method. Similar devices are used for cooling acids and lubricating oil, as well as in equipment that is used to solve environmental problems.
On sale you can find heat exchangers marked APL. By design, they are similar to those indicated by the letters TPL. The design contains turbulent parts, and a distinctive feature is the form and method of connection, which is provided for gas cooling.
Funke GPLK 20-30 heat exchanger consists of profiled smooth plates between which profiled turbulent plates are located. They are soldered in a single block during the production process. Such heat exchangers are used to cool hydraulic and motor oils. Units have found their application in heating plants, heating equipment and in air conditioners, as well as cooling devices.
Performance Reviews
Funke are heat exchangers that consumers select most often for a variety of reasons. Among them, buyers highlight the use of turbulent flow in the work, due to which it is possible to achieve the most intense heat transfer. This mode minimizes surface contamination. In designs asymmetric channels are used. According to consumers, this reduces the number of plates and their sizes.
Quite simply, plate heat exchangers are taken apart for repair and maintenance. Cleaning, according to customers, requires less labor than other types of heat exchangers. This indicates high serviceability. The volume of water in the channels is relatively small, the consequence of this is the possibility of rapid temperature regulation.
Why choose Funke Plate Heat Exchangers?
Funke - heat exchangers that allow you to select equipment for power. If there is a need to increase the rated power, the heat transfer surface can be easily changed by the consumer. The material for the manufacture of plates is acid-resistant steel or stainless steel. If the heat exchanger is supposed to be operated in an aggressive environment, then titanium is used for it.
The probability of corrosion is completely absent, because the material for the manufacture of plates is selected taking into account the possible presence of certain impurities in the water. The heat exchangers have such a design that in case of leakage it can be quickly detected and eliminated. Funke plate heat exchanger eliminates mixing of the medium, even if emergency situations occur. The cost of the device, as well as the number of plates are reduced due to the use of an asymmetric channel in the design.
Advantages and main features of the Funke FP 10-25 heat exchanger
Funke heat exchangers are used in various industries. But this feature is not the only one that consumers should pay attention to. Among the additional advantages it is necessary to highlight:
- high quality of materials used;
- operational safety;
- impressive heating area;
- durability;
- unpretentiousness;
- availability.
High quality materials are used in the production, this also applies to gaskets, as well as gaskets, which extend the life of the device.
Conclusion
Funke plate heat exchanger has earned the recognition and popularity of domestic consumers. No model of this brand is an exception. Units are characterized by durability, reliability and affordable cost. They are characterized by outstanding technical characteristics and heat transfer qualities. Devices perfectly cope with the tasks and are widely used in many industries. Among them, chemical, gas and oil should be distinguished. Heat exchangers found their application in metallurgy and became part of heating systems.