A lot of new finishing materials have recently appeared on the modern market. These include professional flooring. They call it galvanized iron, stamped in the form of a trapezoidal profile. On top of such sheets are coated with a special polymer composition that prevents corrosion.
Previously, this material was used only for the installation of utility rooms - change houses, warehouses, etc. However, recently, thanks to improved technologies for the manufacture and coloring of sheets in bright, rich
colors, corrugated board has increasingly been used for decoration of residential premises.
Its main difference from siding is unconditional environmental cleanliness and very high strength. Both wall decking and roofing are available. The first difference is that the profile wave height can not be more than 2 cm. After installation, such sheets are subject to lower loads, both mechanical and adverse environmental factors. Therefore, wall panels are slightly less durable than roofing.
Marked corrugated wall as follows:
- C10 is a universal sheet that is used both for walls and for roofs with a large slope of slopes.
- C8 - a sheet with a small profile height, used for fences, walls and ceilings.
- C21 is a universal professional sheet.
- MP18 - a sheet having a sinusoidal profile (18 mm high).
Wall corrugated board is used both for wall decoration and for installing fences, temporary and utility rooms, as partitions, etc. The popularity of this material is explained by many qualities. As already noted, it is absolutely harmless to health. In addition, this material is distinguished by high strength, durability and, importantly, ease of transportation and installation.
Installation of wall corrugated board, when using it as a facing of a finished wall, begins with the installation of leveling horizontal brackets perpendicular to the wall. After all of them are fixed, insulation sheets are installed. They are fixed to the wall with polyamide dowels. A windproof film is attached over the insulation . Then, to the brackets, leaving a small gap for ventilation, vertical guides are attached with rivets. Thus, a frame is obtained, on which, in the future, wall corrugated board will be attached . Sheets are installed using self-tapping screws. The step depends on the type of corrugated board used. It is necessary to produce fasteners so that the sheets are firmly held on rails.
When installing temporary rooms, cabins and other structures that do not require insulation, fastening is carried out to the crossbars of a pre-installed frame, also through one wave, and vertically with rivets.
A wide range of applications, reasonable price and remarkable performance characteristics that distinguish corrugated wall, have made it the most bought finishing material for walls and roofs. Galvanized and protected by a polymer composition, the surface of the sheets can significantly extend the service life. He is at least 20 years old. This is another great quality that explains the high popularity of this finishing material.